Updated Jan-2022 Premium HPE2-T37 Exam Engine pdf - Download Free Updated 41 Questions
Authentic HPE2-T37 Dumps With 100% Passing Rate Practice Tests Dumps
HP HPE2-T37 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION 16
You want to put two FlexNlCs into a single Link Aggregation Group within a server profile. What Is a prerequisite for this setup?
- A. An upgrade license must be purchased and deployed.
- B. Both FlexNlCs must be connected to the same network.
- C. The Compute Module profile must have exactly two connections defined.
- D. The sFlow option must be enabled and configured.
Answer: D
NEW QUESTION 17
What is required to add remote frame link topology to HPE OneView?
- A. Management ports of the remote frame link topology must be connected to the management LAN.
- B. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
- C. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
- D. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.
Answer: C
NEW QUESTION 18
How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?
- A. As an application running on the server with CentOS Linux system
- B. As a virtual appliance running on the supported hypervisor.
- C. As a physical appliance based on HPE ProLiant 360 Gen 10.
- D. As an application running on the server with Windows system.
Answer: C
NEW QUESTION 19
Which statement about M-LAG setup is true?
- A. M-LAG for HPE Synergy can be either single-homed or multi-homed, while for HPE BladeSystem only single-homed.
- B. When combined with IRF, M-LAG will allow you to aggregate ports coming from clustered HPE Synergy Virtual Connect modules.
- C. M-LAG has to be defined manually for HPE BladeSystem, but it is automatically configured for HPE Synergy.
- D. sFLOW cannot be enabled if M-LAG is configured between HPE Synergy Virtual Connect modules in the same frame.
Answer: B
NEW QUESTION 20
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
- A. The firmware repository service must be restarted using maintenance connection.
- B. The refresh procedure must be performed on each logical enclosure to refresh firmware.
- C. All of the components are up to date and compliant with firmware baseline.
- D. The firmware repository is not defined within firmware compliance report.
Answer: A
NEW QUESTION 21
Your customer built a sever profile for HPE Synergy Gen 10 server and configured boot mode to Legacy BIOS. Which feature Is not available for this Compute Module?
- A. Workload profile
- B. Boot from SAN
- C. BIOS management
- D. Secure boot
Answer: D
NEW QUESTION 22
What is a network set?
- A. It is a collection of all networks configured within HPE OneView regardless of network type.
- B. It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.
- C. It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.
- D. It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.
Answer: B
NEW QUESTION 23
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE OneView Global Dashboard allows server profile replication and change management.
- B. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
- C. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- D. PowerShell Library for HPE OneView allows scripted environment modification.
Answer: C
NEW QUESTION 24
Which statement about a Logical Enclosure for HPE BladeSystem is Hue?
- A. A logical enclosure can have between 1 to 5 HPE BladeSystem c7000 enclosures.
- B. A logical enclosure must be created only for monitored HPE BladeSystem C700O enclosures.
- C. A logical enclosure can contain a mix of HPE BladeSystem c7000 and C3000 enclosures.
- D. A logical enclosure is created automatically, and it is always based on a single enclosure.
Answer: D
NEW QUESTION 25
Which parameters can be defined in a server profile template for HPE Synergy Compute Modules? (Select two.)
- A. IL0 IPv4 or IPv6 address.
- B. partition layout for servers running Linux.
- C. NIC teaming setup at OS level.
- D. local storage and BIOS settings.
- E. network and storage connectivity.
Answer: D,E
NEW QUESTION 26
Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems. What should you explain to this customer?
- A. HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.
- B. HPE ProLiant Gen 10 servers do not need an HPE OneView license.
- C. Not all of the features will be available for HPE ProLiant G7 systems.
- D. HPE Management Agent must he installed for for HPE ProLiant Gen 10 servers.
Answer: B
NEW QUESTION 27
Which statement about a server profile for an Apollo system is true?
- A. Enclosure Group Is automatically selected
- B. Virtual WWNs and MAC addresses can be defined
- C. UEFI optimized is the only available boot mode
- D. Fibre Channel connections can be defined
Answer: B
NEW QUESTION 28
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.
Answer:
Explanation:
NEW QUESTION 29
After replacing a failed Compute Module, you notice the server profile Is not automatically assigned to the replaced server hardware. What can cause this issue?
- A. IL0 firmware of the replacement server is different than firmware in broken server.
- B. Server profile affinity is configured to Device Day + server hardware.
- C. The replacement server has more memory or CPUs than broken machine.
- D. The enclosure group has to be updated to match the original enclosure group.
Answer: A
NEW QUESTION 30
Refer to the exhibit.
Which statement about the logical interconnect shown is true?
- A. For FC uplink sets, an additional uplink from second module should be added for redundancy.
- B. The maximum supported number of the internal networks for logical interconnect is configured.
- C. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.
- D. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.
Answer: D
NEW QUESTION 31
Refer to the exhibit.
You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?
- A. The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.
- B. Changes to the server profile were implemented directly on the server profile.
- C. Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.
- D. HPE OneView was restored from a backup that created ^consistency with the server profile template.
Answer: C
NEW QUESTION 32
......
Verified Pass HPE2-T37 Exam in First Attempt Guaranteed: https://www.testkingpass.com/HPE2-T37-testking-dumps.html
HP HPE2-T37 Real Exam Questions Guaranteed Updated Dump from TestkingPass: https://drive.google.com/open?id=14HckgdkvJCZpQ3WTUbM6jJ6FHb2YiHlY