Best Quality HPE2-T37 Exam Questions HP Test To Gain Brilliante Result!
Preparations of HPE2-T37 Exam 2021 HPE Product Certified - OneView [2022] Unlimited 41 Questions
NEW QUESTION 20
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
- B. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
- C. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- D. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
Answer: C
NEW QUESTION 21
Which statement about access to HPE Onboard Administrator is true when an HPE BladeSystem enclosure is added to HPE OneView?
- A. It is enabled only when an HPE BladeSystem enclosure is monitored using HPE OneView.
- B. It is blocked when an HPE BladeSystem enclosure is managed using HPE OneView.
- C. It is enabled when an HPE BladeSystem is either managed or monitored using HPE OneView.
- D. It is blocked when HPE BladeSystem enclosure is monitored using HPE OneView.
Answer: A
NEW QUESTION 22
For HPE Primera, match each task with the management tool that can be used to perform it.
Answer:
Explanation:
NEW QUESTION 23
Which types of support dump can be created using HPE OneView? (Select two.)
- A. Logical enclosure support dump
- B. Maintenance console support dump
- C. Firmware deployment support dump
- D. Appliance support dump
- E. Enclosure group support dump
Answer: A,B
NEW QUESTION 24
You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?
- A. Logical Interconnect
- B. Logical Enclosure
- C. Server Profile
- D. Logical Interconnect Group
Answer: B
NEW QUESTION 25
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
- A. The firmware repository service must be restarted using maintenance connection.
- B. The refresh procedure must be performed on each logical enclosure to refresh firmware.
- C. The firmware repository is not defined within firmware compliance report.
- D. All of the components are up to date and compliant with firmware baseline.
Answer: A
NEW QUESTION 26
What is a network set?
- A. It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.
- B. It is a collection of all networks configured within HPE OneView regardless of network type.
- C. It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.
- D. It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.
Answer: D
NEW QUESTION 27
Which statement about a server profile for an Apollo system is true?
- A. Virtual WWNs and MAC addresses can be defined
- B. UEFI optimized is the only available boot mode
- C. Fibre Channel connections can be defined
- D. Enclosure Group Is automatically selected
Answer: A
NEW QUESTION 28
What is required to add remote frame link topology to HPE OneView?
- A. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
- B. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.
- C. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
- D. Management ports of the remote frame link topology must be connected to the management LAN.
Answer: A
NEW QUESTION 29
Which parameters can be defined in a server profile template for HPE Synergy Compute Modules? (Select two.)
- A. partition layout for servers running Linux.
- B. IL0 IPv4 or IPv6 address.
- C. network and storage connectivity.
- D. NIC teaming setup at OS level.
- E. local storage and BIOS settings.
Answer: C,E
NEW QUESTION 30
A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup. How this task can be simplified while keeping the profile consistent?
- A. Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.
- B. An existing volume can be replicated automatically when creating a server profile.
- C. Boot volumes can be created on demand and defined in the server profile template.
- D. single SAN volume can be created and utilized by all HPE Synergy Compute Modules.
Answer: C
NEW QUESTION 31
Which HPE components can be managed using HPE Composer? (select two.)
- A. HPE Synergy Virtual Connect SE 32Gb FC Module
- B. HPE MSA 2062 Storage Array
- C. HPE B-series SN6600B Fibre Channel Switch
- D. HPE Synergy 480 Compute Modules
- E. HPE Superdome Flex 280
Answer: A,C
NEW QUESTION 32
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.
Answer:
Explanation:
NEW QUESTION 33
Which statement about M-LAG setup is true?
- A. When combined with IRF, M-LAG will allow you to aggregate ports coming from clustered HPE Synergy Virtual Connect modules.
- B. M-LAG for HPE Synergy can be either single-homed or multi-homed, while for HPE BladeSystem only single-homed.
- C. sFLOW cannot be enabled if M-LAG is configured between HPE Synergy Virtual Connect modules in the same frame.
- D. M-LAG has to be defined manually for HPE BladeSystem, but it is automatically configured for HPE Synergy.
Answer: A
NEW QUESTION 34
You try to add an HPE Primera array to HPE OneView, but you get a connectivity error. However, you can connect to the array using SSMC. What should you verify before adding HPE Primera to HPE OneView?
- A. whether array management using HPE OneView is enabled in SSMC.
- B. whether the appropriate license for HPE Primera Is available in HPE OneView.
- C. whether WSAPI service is enabled on HPE Primera array.
- D. whether there are at least two Fibre Channel networks defined in HPE OneView.
Answer: C
NEW QUESTION 35
You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution. How can an IPv4 address pool defined by the administrator be used In HPE OneView?
- A. to provide static IP addresses for storage systems managed in HPE OneView
- B. to provide static IP addresses for Logical Interconnects and Logical Enclosures
- C. to provide static IP addresses for an operating system running on a Compute Module
- D. to provide static IP addresses to IL0 and interconnect modules if applicable
Answer: C
NEW QUESTION 36
......
Focus on HPE2-T37 All-in-One Exam Guide For Quick Preparation: https://www.testkingpass.com/HPE2-T37-testking-dumps.html
HPE2-T37 All-in-One Exam Guide For Quick Preparation: https://drive.google.com/open?id=14HckgdkvJCZpQ3WTUbM6jJ6FHb2YiHlY