2022 Realistic Verified HPE2-T37 exam dumps Q&As - HPE2-T37 Free Update
Use Real HPE2-T37 Dumps - 100% Free HPE2-T37 Exam Dumps
NEW QUESTION 37
Which statement about an HPE OneView server profile is true?
- A. A server profile created for a specific server hardware type cannot be moved to a server with a different server hardware type.
- B. A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE Superdome Flex servers.
- C. A server profile can be used to configure a local storage controller, but cannot be used to configure SAN-based storage.
- D. A server profile can be used to update firmware and drivers when the operating system on the server is up and running.
Answer: C
NEW QUESTION 38
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
- A. The firmware repository service must be restarted using maintenance connection.
- B. The firmware repository is not defined within firmware compliance report.
- C. The refresh procedure must be performed on each logical enclosure to refresh firmware.
- D. All of the components are up to date and compliant with firmware baseline.
Answer: A
NEW QUESTION 39
Within HPE OneView you can configure SNMPv1 read community string.
What is the purpose of this feature?
- A. This is an SNMP community string that will be used to receive a trap's SNMP Agent
- B. This is an SNMP community string that will be used when traps are forwarded to a WBEM Provider
- C. This is an SNMP community string that will be used to receive traps from HPE Onboard Administrators
- D. This is an SNMP community string that will be used when traps are forwarded to other SNMP applications
Answer: A
NEW QUESTION 40
Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems. What should you explain to this customer?
- A. HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.
- B. HPE Management Agent must he installed for HPE ProLiant Gen 10 servers.
- C. HPE ProLiant Gen 10 servers do not need an HPE OneView license.
- D. Not all of the features will be available for HPE ProLiant G7 systems.
Answer: D
NEW QUESTION 41
what is required to add a remote frame to the primary management ring?
- A. UUD of the remote HPE Composer
- B. Serial number of one of the remote frames
- C. Remote frame Link Module IPv6 address
- D. Request code from the primary HPE Composer
Answer: D
NEW QUESTION 42
Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.
Answer:
Explanation:
NEW QUESTION 43
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE OneView Global Dashboard allows server profile replication and change management.
- B. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
- C. PowerShell Library for HPE OneView allows scripted environment modification.
- D. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
Answer: D
NEW QUESTION 44
Which statement about logical JBODs configured using KPE OneView and D3940 Storage Modules is true?
- A. Different types of the drives can be used within a logical JBOD as long as they have the same capacity
- B. Logical JBOD functionality must be enabled on the Enclosure Group level by a storage administrator
- C. A logical JBOD lifecycle can be associated with a server profile lifecycle and drives can be securely erased.
- D. A logical JBOD cannot be created during server profile creation and must be prepared in advance
Answer: D
NEW QUESTION 45
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.
Answer:
Explanation:
NEW QUESTION 46
Click the option that will allow you to disable virtual MAC addresses or generate a new pool of virtual Worldwide Names.
Answer:
Explanation:
NEW QUESTION 47
For HPE Primera, match each task with the management tool that can be used to perform it.
Answer:
Explanation:
NEW QUESTION 48
You configured downlink aggregation for one of the HPE Synergy Compute Modules in an environment by placing two connections in the same Link Aggregation Group. After you made the changes to the server profile, its status changed to critical.
What can be done to fix this issue?
- A. Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.
- B. The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.
- C. The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.
- D. Ensure that the Link Aggregation Group time-out value matches the server set values.
Answer: A
NEW QUESTION 49
You plan to update HPE OneVew to the latest version
What Should you do Mora starting HPE OneView update?
- A. Put all servers managed through HPE OneView to maintenance state
- B. Run the Update Readiness checker tool to evaluate HPE OneView health status
- C. Create a support dump for the appliance and for all managed logical interconnects
- D. Disable HPE Remote Support at toe HPE OneView appliance level
Answer: B
NEW QUESTION 50
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.
Answer:
Explanation:
NEW QUESTION 51
What event occurs on iLO when an HPE ProLiant server is added to HPE OneView?
- A. REST API plugin is enabled for iLO
- B. IPMI credentials are configured for the iLO
- C. Active Directory configuration is performed on iLO
- D. SSO certificate is added to the iLO
Answer: A
NEW QUESTION 52
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are not added to the Logical Interconnect Group configuration.
- B. The other networks have Private Network' selected, which hides them from Compute Modules.
- C. The other networks are configured with a purpose other than General or Management.
- D. The other networks are not configured with the required Smart Link parameter.
Answer: A
NEW QUESTION 53
Where is the association between an HPE OneView network and uplink port defined?
- A. Within an Enclosure Group definition
- B. At the network set level
- C. At the Logical Interconnect Group level
- D. Within an HPE OneView network definition
Answer: C
NEW QUESTION 54
Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems. What should you explain to this customer?
- A. HPE ProLiant Gen 10 servers do not need an HPE OneView license.
- B. HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.
- C. Not all of the features will be available for HPE ProLiant G7 systems.
- D. HPE Management Agent must he installed for for HPE ProLiant Gen 10 servers.
Answer: A
NEW QUESTION 55
Refer to the exhibit.
Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?
- A. Firmware on the master modules is too low to support highly available setup.
- B. Some master modules only support a redundant setup.
- C. There are not sufficient frames for highly available setup.
- D. A dedicated license must be added to HPE OneView to enable this feature.
Answer: B
NEW QUESTION 56
Which parameters can be defined in a server profile template for HPE Synergy Compute Modules? (Select two.)
- A. network and storage connectivity.
- B. IL0 IPv4 or IPv6 address.
- C. local storage and BIOS settings.
- D. partition layout for servers running Linux.
- E. NIC teaming setup at OS level.
Answer: A,C
NEW QUESTION 57
What is the best practice when deploying an HPE OneView appliance?
- A. Deploy two HPE OneView appliances and configure them in HA mode.
- B. deploy the appliance in a hypervisor cluster that Is not managed by OneView.
- C. Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.
- D. Use thin-provisioning for the HPE OneView appliance to save storage capacity.
Answer: B
NEW QUESTION 58
You originally configured boot mode for HPE ProLiant Gen10 server to 'Legacy BIOS' in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the 'UEFI optimized' to leverage some features provided by this mode.
What must you do next?
- A. reset an il_0 management processor to activate the new boot mode for the server
- B. reinstall an operating system, as UEFI is using different drive format than Legacy BIOS
- C. reset BIOS settings to the defaults through the server profile after changing the boot mode
- D. reset BIOS settings to the defaults so UEFI settings can be applied
Answer: A
NEW QUESTION 59
You try to add an HPE Primera array to HPE OneView, but you get a connectivity error. However, you can connect to the array using SSMC. What should you verify before adding HPE Primera to HPE OneView?
- A. whether array management using HPE OneView is enabled in SSMC.
- B. whether the appropriate license for HPE Primera Is available in HPE OneView.
- C. whether there are at least two Fibre Channel networks defined in HPE OneView.
- D. whether WSAPI service is enabled on HPE Primera array.
Answer: D
NEW QUESTION 60
Your customer wants to optimize GenlO servers for a virtualization workload by configuring all of them with a specific workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?
- A. Set a specific workload profile within server profile template and update all profiles.
- B. Set a specific workload profile using IL0 interface for each individual server.
- C. Set a specific workload profile for all managed servers as an HPE OneView global setting.
- D. Set a specific workload profile within Logical Interconnect Group and update all servers.
Answer: C
NEW QUESTION 61
......
Pass HPE2-T37 exam Updated 81 Questions: https://www.testkingpass.com/HPE2-T37-testking-dumps.html
HPE2-T37 Exam Dumps, Test Engine Practice Test Questions: https://drive.google.com/open?id=14HckgdkvJCZpQ3WTUbM6jJ6FHb2YiHlY