Nov-2021 Realistic NACE-CIP2-001 Exam Dumps with Accurate & Updated Questions
NACE-CIP2-001 Exam Dumps - PDF Questions and Testing Engine
NEW QUESTION 26
Linings are used on the interior of pipelines to
- A. afford limited temperature insulation.
- B. protect the transported product.
- C. reduce magnetic polarity.
- D. provide protection against soil chemicals.
Answer: B
NEW QUESTION 27
You are the NACE Level 2 Coating Inspector where SSPC PA 2 has been specified with an additional requirement that no individual gauge reading shall be below a certain value.
As this is not part of the standard you should:
- A. Ignore the additional requirement
- B. Request clarification from the specifier
- C. Enforce the additional requirement
- D. Call your supervisor
Answer: C
NEW QUESTION 28
External coatings applied to buried pipelines are generally tested for:
- A. Solvent resistance
- B. Cathodic disbondment
- C. Chalking resistance
- D. Gloss level
Answer: B
NEW QUESTION 29
Because a NACE Level 2 Inspector has been trained in specific destructive tests, it is up to the Inspector to decide if and when a destructive test is required.
- A. True
- B. False
Answer: B
NEW QUESTION 30
The Concrete Repair Institute's comparators can be used to assess:
- A. Surface profile prior to coating
- B. Compressive and tensile strength prior to coating
- C. Contamination levels prior to coating
- D. Surface cleanliness prior to coating
Answer: A
NEW QUESTION 31
When completing the Final Inspection report the Inspector should write the report using:
- A. Language that the most would understand
- B. Language that only technical experts would understand
- C. Language that another NACE Inspector would understand
- D. Language that only in the project would understand
Answer: A
NEW QUESTION 32
Coating application to concrete substrates is:
- A. The same as coating steel
- B. Not required as Concrete is inorganic
- C. More challenging than coating steel
- D. Less challenging, than coating steel
Answer: C
NEW QUESTION 33
Inspection and Test Plans are provided to:
- A. So the Inspector doesn't have to read the entire specification
- B. So the contractor has a single document to reference
- C. To supersede the requirements of the product data sheets
- D. Outline the inspection steps, sequencing and pass/fail criteria
Answer: D
NEW QUESTION 34
You have just your NACE CIP Level 2 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:
- A. Meet with the prospective employer to scope of your role
- B. Review the NACE Attestation prior to making a decision
- C. Accept assignment without hesitation
- D. Advise the prospective employer that you cannot accept the position
Answer: B
NEW QUESTION 35
In which type of concrete are laitance commonly encountered?
- A. Poured (wet cast)
- B. Concrete block (poured with a form)
- C. Glass fiber cement
- D. Gunite
Answer: A
NEW QUESTION 36
Centrifugal blast cleaning requires:
- A. A large volume of air to propel the abrasive
- B. The use of single use abrasives
- C. Very large nozzles
- D. Well maintained blast wheels
Answer: D
NEW QUESTION 37
When environmental enclosures are being used an inspector needs to be concerned about:
- A. Structural integrity
- B. Air changes
- C. a), b), and c)
- D. Lighting
Answer: C
NEW QUESTION 38
NACE/SSPC Water Jetting standards are directly equivalent to ISO Abrasive Blast Standards:
- A. True
- B. False
Answer: B
NEW QUESTION 39
You are the NACY Coating Inspector on a tank lining project where desiccant dehumidification is being used. Since the first shift of abrasive blasting your readings have indicated relative humidity below 40%; however on the second shift of coating application your readings are indicting 80%.
Your FIRST preferred course of action is to:
- A. Check to See if the dehumidification equipment is operating correctly
- B. Document the readings at the end of the shift
- C. Advise the coating applicator supervisor of your readings
- D. Call your supervisor
Answer: C
NEW QUESTION 40
Non-Conformance Reports are designed to:
- A. Punish the Contractor for substandard work
- B. To identify items that do not meet the specification requirements
- C. Elevate the status of the Inspector
- D. Assist the Owner in negotiating credits from the Contractor
Answer: B
NEW QUESTION 41
You are a NACE Level 2 in-house inspector working in a shop. Your in-house requires you to perform a sleeve test to test for soluble salts; however the 3 rd party NACE Level 3 inspector, the owner, has a san smart meter and has achieved a very different result and has rejected the pre-cleaning.
Your FIRST course of action is to:
- A. Review the specification with the other inspector to see what method was specified
- B. Advise your QC Manager to change the ITP to the use of the salt smart meter
- C. Advise the other inspector he is using an incorrect method
- D. Redo the pre-cleaning based on the other inspectors results
Answer: A
NEW QUESTION 42
An Inspection and Test Plan is required when:
- A. When the Owner specifies one
- B. It is always required
- C. When the Coating Applicator requests one
- D. When the Inspector requests one
Answer: B
NEW QUESTION 43
You are the new NACE Level 2 Inspector on a job which had been very problematic. The previous Inspector was fired duo to personality conflicts with the Contractor's supervisor. Upon arriving onsite the Contractor's supervisor advises you in no uncertain terms that you will be the next to go, unless you cooperate with him.
Your FIRST preferred course of action is to:
- A. Express a willingness to work with the site team and follow the specification
- B. Defend the previous inspector
- C. Challenge the supervisor's authority
- D. Suggest to the Owner that the supervisor should be removed from site
Answer: A
NEW QUESTION 44
It is always possible to see moisture on a steel substrate:
- A. True
- B. False
Answer: B
NEW QUESTION 45
Corrosion is the reverse process of
- A. galvanic deterioration.
- B. steel manufacturing.
- C. hot dipping.
- D. flaking.
Answer: B
NEW QUESTION 46
Surface preparation methods for Non-ferrous metals are:
- A. Not required
- B. The same for all Non-FetT0us metals
- C. The same as for Ferrous metals
- D. Specific for each type of Non-ferrous metal
Answer: D
NEW QUESTION 47
Individuals conducting Coating Surveys should:
- A. Always be trained and experienced Coating Industry
- B. Always be NACE Level 3 Certified Inspectors
- C. Always be experienced Specification Writers
- D. Always be NACE or SSPC Protective coating Specialists
Answer: A
NEW QUESTION 48
The HATE adhesion tester uses
- A. a special tape to apply pressure to the test dolly.
- B. mechanical means only to apply pressure to the test dolly.
- C. a hydraulic piston to apply pressure to the test dolly.
- D. compressed air to apply pressure to the test dolly.
Answer: C
NEW QUESTION 49
Steel shot grit contaminated with oil or grease used in a cetrifugal blast cleaning should be
- A. washed with clean potable water prior to Use.
- B. run through the air wash separator.
- C. mixed with uncontaminated abrasive
- D. disposed of properly.
Answer: D
NEW QUESTION 50
Ideally, documentation requirements should be defined:
- A. By the inspector
- B. By the contractor
- C. At the pre-job conference
- D. In the specification
Answer: D
NEW QUESTION 51
......
Pass NACE NACE-CIP2-001 Exam Quickly With TestkingPass: https://www.testkingpass.com/NACE-CIP2-001-testking-dumps.html
NACE-CIP2-001 Dumps - The Sure Way To Pass Exam: https://drive.google.com/open?id=1KSfxweFAoWBrVdRuGzIIW2Ilf-OAzKoL