2024 Updated NACE NACE-CIP2-001 Dumps PDF - Want To Pass NACE-CIP2-001 Fast
NACE-CIP2-001 Practice Exam Dumps - 99% Marks In NACE Exam
NACE-CIP2-001 certification exam is widely recognized as a mark of excellence in the coatings industry. Employers value this certification because it indicates that a candidate has the required knowledge and skills to properly inspect and assess coatings in a variety of industrial settings. Individuals who earn their NACE-CIP2-001 certification may have better job prospects and higher earning potential than those who do not hold this certification.
NACE-CIP2-001 exam is designed to test the competency of coating inspectors in performing inspections and evaluations of protective coatings systems. NACE-CIP2-001 exam covers a wide range of topics, including surface preparation, coating application, coating inspection, coating types, coating failure analysis, and safety. Successful completion of the exam demonstrates a high level of knowledge and expertise in the field of protective coatings and corrosion control, which can lead to career advancement and increased job opportunities.
NEW QUESTION # 39
Generally for safety considerations, waterjetting hose connections use
- A. an oil/water separator.
- B. a whip-lock device.
- C. filters.
- D. a long wand.
Answer: B
NEW QUESTION # 40
When performing testing in accordance with ASTM D 2583 the inspector may observe:
- A. Cold flow or creep
- B. Glue failure
- C. Cohesion failure
- D. Adhesion failure
Answer: A
NEW QUESTION # 41
When measuring the Dry Film Thickness Of liquid coatings applied to galvanized ferrous substrates the most commonly used instrument is the:
- A. Magnetic Gauge
- B. Ultra Sonic DFT Gauge
- C. Eddy Current Gauge
- D. Tooke Gauge
Answer: D
NEW QUESTION # 42
You are the NACE Level 2 inspector reviewing the documentation from a NACE Level 1 you notice significant documentation errors.
Your FIRST preferred course of action is to:
- A. Correct the errors yourself and suggest the Level 1 inspector be replaced
- B. Have the Level 1 Inspector correct the errors and set up remedial training to improve the quality of documentation
- C. Correct the errors yourself and submit the reports without any further action
- D. Correct the errors yourself and advise your supervisor that the Level 1 Inspector is incompetent
Answer: B
NEW QUESTION # 43
Antifouling coatings are regulated by international treaties.
- A. True
- B. False
Answer: A
NEW QUESTION # 44
Measuring methyl ethyl ketone (MEK) resistance of ethyl silicate inorganic zinc-rich primers by solvent rub requires
- A. 50 double rubs with a saturated cloth.
- B. 25 double rubs with a saturated cloth.
- C. 35 single rubs with a saturated cloth.
- D. 25 single rubs with a saturated cloth.
Answer: A
NEW QUESTION # 45
The most likely area of failure on a buried external pipeline coating is the:
- A. Field joint coating
- B. Areas exposed to Ultra Violet light
- C. Mainline coating
- D. Ground bed
Answer: A
NEW QUESTION # 46
Pre-cleaning of work pieces will NOT remove
- A. mill scale.
- B. snow, ice or water.
- C. oil or grease.
- D. dirt.
Answer: A
NEW QUESTION # 47
In powder coatings, when the particles of powder begin to flow but are not fully liquid, they are in what stage?
- A. Gel stage
- B. Flow stage
- C. Wetting stage
- D. Cure stage
Answer: B
NEW QUESTION # 48
You should bulk store coatings containing isocyanates
- A. in a well ventilated area separate from the work place.
- B. wherever it is convenient
- C. in a refrigerated warehouses
- D. in a heated warehouse.
Answer: A
NEW QUESTION # 49
You are the NACE Level 2 Coating Inspector where SSPC PA 2 has been specified with an additional requirement that no individual gauge reading shall be below a certain value.
As this is not part of the standard you should:
- A. Call your supervisor
- B. Ignore the additional requirement
- C. Request clarification from the specifier
- D. Enforce the additional requirement
Answer: D
NEW QUESTION # 50
Dehumidification is defined as the removal of moisture vapor from the air to
- A. provide worker comfort.
- B. lower its temperature
- C. lower its dew point,
- D. raise its relative humidity.
Answer: C
NEW QUESTION # 51
A single component water borne acrylic coating cures by:
- A. Coalescence
- B. Oxidation
- C. Co-Reaction
- D. Solvent Evaporation
Answer: A
NEW QUESTION # 52
You are a NACE Level 2 Coating Inspector who has just arrived on a job in progress where there is no Inspection and Test Plan (ITP). The first morning you arrive the job is behind schedule and you are asked to take DIY Film Thickness readings.
Your FIRST preferred course of action is to:
- A. Use a generally accepted industry standard and to take readings
- B. Call your supervisor
- C. Develop your own methodology and proceed take the readings
- D. Refuse to take readings until an is in place
Answer: A
NEW QUESTION # 53
External coatings applied to buried pipelines are generally tested for:
- A. Gloss level
- B. Solvent resistance
- C. Chalking resistance
- D. Cathodic disbondment
Answer: D
NEW QUESTION # 54
An Inspection and Test Plan is required when:
- A. When the Owner specifies one
- B. When the Coating Applicator requests one
- C. It is always required
- D. When the Inspector requests one
Answer: C
NEW QUESTION # 55
When working with someone who is very concerned about Stability and maintaining adherence to the status-quo, the Inspector should try to:
- A. Challenge their value to the team and try to get them out of their comfort zone
- B. Implement immediate to get them motivated
- C. Make sure they are the center of attention in all site meetings
- D. Give them as much advance notice as possible about upcoming changes
Answer: D
NEW QUESTION # 56
You are the new NACE Level 2 Inspector on a job which had been very problematic. The previous Inspector was fired duo to personality conflicts with the Contractor's supervisor. Upon arriving onsite the Contractor's supervisor advises you in no uncertain terms that you will be the next to go, unless you cooperate with him.
Your FIRST preferred course of action is to:
- A. Challenge the supervisor's authority
- B. Suggest to the Owner that the supervisor should be removed from site
- C. Express a willingness to work with the site team and follow the specification
- D. Defend the previous inspector
Answer: C
NEW QUESTION # 57
You are the NACE Coating Inspector on a tank lining project and are asked to perform a high voltage holiday test after the coating applicators have completed their final repairs. After meeting all the confined space entry permit you enter the tank and notice a very strong odor of solvent.
Your first course of action should to:
- A. Investigate to find the source of the odor
- B. Exit the tank and immediately and report the problem to the nearest safety supervisor
- C. Don your air supplied respirator and continue the testing
- D. Exit the tank and document the incident in your daily report
Answer: B
NEW QUESTION # 58
As a NACE Level 2 Inspector, NACE clearly indicates that you ate qualified to independently produce final documentation for a shop project.
- A. True
- B. False
Answer: A
NEW QUESTION # 59
......
Updated Verified NACE-CIP2-001 Q&As - Pass Guarantee: https://www.testkingpass.com/NACE-CIP2-001-testking-dumps.html
NACE-CIP2-001 Certification with Actual Questions: https://drive.google.com/open?id=1Nv6ly6xkCKLqtRrPQEQDLuFe7ySsUyQ3