[Aug 10, 2021] Get Free Updates Up to 365 days On Developing DES-6322 Braindumps [Q16-Q35]

[Aug 10, 2021] Get Free Updates Up to 365 days On Developing DES-6322 Braindumps

Best Quality EMC DES-6322 Exam Questions

NEW QUESTION 16
Which VxRail model can only be installed with static rack rails?

A. G Series
B. S Series
C. V Series
D. P Series

Answer: C

NEW QUESTION 17
A VxRail implementation engineer is validating the network environment with NVT.
The proposed switch configuration is shown in the exhibit.
The ToR Switch information file is available.

A. Use the VxRail simulator to set up NVT for switch validation.
Import the switch Information and tag the ports based on the exhibit.

Answer: A

Explanation:

Send your suggestions for this question.

NEW QUESTION 18
An implementation engineer is logged into the vSphere Client of a recently deployed VxRail cluster They want to review the versions of all the installed VxRail software components.
Which view should they use to gather this information?

A. Menu > Administration > Solutions > Client Plugins
B. Host and Clusters > VxRail Cluster > Configure > VxRail > Updates
C. Hosts and Clusters > VxRail Cluster > Monitor > VxRail > Appliances
D. Host and Clusters > VxRail Cluster > Configure > VxRail > System

Answer: B

NEW QUESTION 19
A VxRail E560F model was delivered six months ago and is now scheduled to be installed with the target code. What is the correct order of steps to complete this task?

Answer:

Explanation:

NEW QUESTION 20
What is a valid 2-node VxRail cluster configuration?

A. Series with 4x 25 GbE in a direct-connect configuration
B. Series with 4x 10 GbE in a switch configuration
C. Series with 4x 1 GbE in a direct-connect configuration
D. Series with 2x 25 GbE in a switch configuration

Answer: B

NEW QUESTION 21
A VxRail Manager VM must be configured as follows:
* IP address: 192 168.10.16
* Net mask: 255.255.255.0
* Gateway: 192 168 10 254
Which command must be used?

A. vxrail-primary -config --vxrail-address 192.168.10 16 --vxrail-netmask 255 255 255 0 -vxrail-gateway 192.168,10 254
B. vxrail-network -config --vxrail-address 192.166 10 16 --vxrail-netmask 255 255.255 0 --vxrail-gateway 192.168.10.254
C. vxrail-prrmary -config --ip 192 168 10 16 -netmask 255 255 255 0 -gateway 192 168 10 254
D. vxrail-network-config --ip 192 168 10.16-netmask 255.255.255.0-gateway 192 168 10.254

Answer: A

NEW QUESTION 22
What is the maximum number of supported nodes for a VxRail cluster running on a 1 GbE network?

A. 0
B. 1
C. 2
D. 3

Answer: C

NEW QUESTION 23
Which service determines the primary node after powering on the VxRail nodes during the deployment of a VxRail cluster?

A. Loudmouth
B. Election
C. Marvin
D. Mystic

Answer: C

NEW QUESTION 24
Which command is used to restart the Loudmouth process on an ESXi node?

A. systemcti restart vmware-loudmouth
B. /usr/IibAmiware/loudmouth/bin/loudmouthd restart
C. systemcti restart loudmouth
D. /etc/int.d/loudmouth restart

Answer: D

NEW QUESTION 25
A VxRail Cluster has just been deployed. Use the VxRail simulator to determine the Service Tag, Model, and ESXJ IP Address of the first node - vcluster730.esx01.edu.local.
Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

A. Option A
B. Option D
C. Option B
D. Option C

Answer: B

NEW QUESTION 26
A customer has decided that they will be using the Spanning Tree protocol in their Dell EMC ToR switches How should the switch ports used for VxRail be configured to achieve a successful deployment?

A. Set the port type to edge
B. Set the port mode to access
C. Enable MLD snooping and querier
D. Enable link aggregation for all ports

Answer: A

NEW QUESTION 27
What is the minimum number of VxRail nodes required for a vSAN storage policy with RAID-5 (Erasure Coding)?

A. 0
B. 1
C. 2
D. 3

Answer: C

NEW QUESTION 28
A VxRail implementation engineer is validating the network environment with NVT. The proposed switch configuration is shown in the exhibit. The ToR Switch information file is available.
Use the VxRail simulator to set up NVT for switch validation. Import the switch Information and tag the ports based on the exhibit.

Answer:

Explanation:
Pending
Send your suggestions for this question.

NEW QUESTION 29
A systems engineer needs to check the health of the nodes and the system VMs to prevent complications or failures during VxRail upgrades. Which tool must be used to perform the task?

A. CloudlQ
B. VxVerify
C. VxRail ACE
D. SolVe Online

Answer: D

NEW QUESTION 30
What is validated by running the Proactive Network Performance test in vCenter on a VxRail cluster?

A. Network configuration and performance for vSAN
B. Network performance for virtual machines
C. Latency measurement between DCs for Stretched Clusters
D. Latency and bandwidth measurement to the witness host

Answer: D

NEW QUESTION 31
Match each component of the VxRail HCI System Software to its description.

Answer:

Explanation:

NEW QUESTION 32
A planned VxRail Stretched Cluster will have four All-Flash nodes at each site What is the recommended storage policy to ensure cross-site and local protection, using storage as efficiently as possible?

A. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - 1 failure - RAID-1 (Mirroring)
B. Site disaster tolerance - None - keep data on Preferred (stretched cluster) Failures to tolerate - 1 failure - RAID-5 (Erasure Coding)
C. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - no data redundancy
D. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - 1 failure - RAID-5 (Erasure Coding)

Answer: B

NEW QUESTION 33
After implementation, the implementation engineer observes errors from both VxRail Manager and vCenter Server. Dell EMC support has requested a log bundle containing only the required log files. Using the simulator, create and download a log bundle for Dell EMC support.
When you have finished, continue to the next question.