[Oct-2021] DES-6322 Braindumps – DES-6322 Questions to Get Better Grades
DES-6322 Exam Dumps - Try Best DES-6322 Exam Questions - TestkingPass
Dell EMC DES-6322 Exam Syllabus Topics:
| Topic | Details | Weights |
|---|---|---|
| VxRail Troubleshooting | - Perform VxRail log collections - Describe VxRail troubleshooting resources and their uses - Troubleshooting using vSAN tools - Perform VxRail RASR factory image upgrade and reset procedures | 13% |
| Introduction to VxRail | - Describe VxRail use cases, architecture, models, and software stack - Describe VxRail management, licensing, and data protection options | 8% |
| VxRail Network Environment Requirements and Initialization | - Validate the network environment manually - Validate the network environment using the Network Validation Tool - Describe ToR network requirements and settings | 10% |
| VxRail Pre-deployment Tasks and Hardware Installation | - Describe VxRail pre-installation requirements and use of the configuration tools - Describe VxRail system racking and cabling procedures -Describe system power up/down and setting management VLAN procedures | 12% |
| VxRail System Initialization | - Describe considerations for deploying Embedded and External vCenter configurations -Explain differences in the VxRail implementation procedures for various configuration options - Perform a VxRail initialization using the VxRail First Run Wizard - Explain requirements for 2-node implementations | 17% |
| VxRail Appliance REST API | - Identify REST API functionality available in VxRail and use VxRail API to perform tasks | 7% |
| VxRail Post-deployment Procedures | - Perform post-installation validation of the VxRail Cluster Configure support account, SRS, and perform software upgrades - Describe how to Implement licenses for a VxRail cluster -Explain the vSAN configuration settings and configure required vSAN settings post deployment - Configure support account and SRS -Complete a Test Plan and generate a VxRail As-Built Configuration report | 20% |
| VxRail Cluster Expansion and Stretched Clusters | - Describe VxRail Upgrade requirements and activities - Describe VxRail appliance scale-out best practices and the cluster expansion process -Describe the VxRail Stretched Cluster architecture, features, and requirements | 13% |
NEW QUESTION 42
According to Dell best practices, which VxRail series can be deployed in either datacenters or remote locations?
- A. G Series
- B. V Series
- C. E Series
- D. D Series
Answer: C
NEW QUESTION 43
An implementation engineer is performing a precheck on a VxRail cluster before expansion. During validation, they find out that the host is not compatible.
Use the VxRail simulator to describe why the host is Incompatible.
Note: It is necessary to close (x) the simulator window before you can select a response to this question.
- A. Insufficient number of vSphere licenses
- B. Invalid vCenter 5erver license
- C. Firmware of ESXi host needs to be updated
- D. bmc and bios are running older versions
Answer: B
NEW QUESTION 44
A systems engineer is tasked to configure a VxRail cluster and notices that the VxRail Deployment Wizard fails to launch. The engineer discovers that the software is corrupted.
What should the engineer do to address the issue?
- A. Verify that the JSON file is not corrupted and has all the required values
- B. Check vCenter and troubleshoot the build failure
- C. Use the VMware Host Client and iDRAC to access the nodes for troubleshooting
- D. Return the nodes to the original build state
Answer: D
NEW QUESTION 45
What is a consideration when expanding a VxRail cluster? (Choose two.)
- A. 1 GbE must be hybrid and single processor node type
- B. G Series clusters can be expanded only with G Series nodes
- C. Expanding a cluster to 64 nodes requires a 25 GbE network
- D. Mixing of All-Flash and all-NVMe nodes in a cluster is not allowed
Answer: B,C
NEW QUESTION 46
An implementation engineer needs to validate the VxRail network configuration. Where can they obtain the NVT for VxRail?
- A. Dell Technologies Central
- B. Dell VxRail Fast Pass
- C. Dell Technologies Information Hub
- D. Dell VxRail Expert Channel
Answer: A
NEW QUESTION 47
A VxRail implementation engineer is validating the network environment with NVT. The proposed switch configuration is shown in the exhibit. The ToR Switch information file is available.
Use the VxRail simulator to set up NVT for switch validation. Import the switch Information and tag the ports based on the exhibit.
Answer:
Explanation:
Pending
Send your suggestions for this question.
NEW QUESTION 48
For which typical activity would the Full data migration setting be used when placing a VxRail host into maintenance mode?
- A. Permanently removing host from cluster
- B. Shutting down an entire cluster
- C. Rebooting a single ESXi host
- D. Temporary maintenance
Answer: D
NEW QUESTION 49
Which vSAN feature requires an All-Flash cluster?
- A. Erasure Coding
- B. Storage Policy Based Management
- C. Data-at-Rest Encryption
- D. Data-in-Transit Encryption
Answer: C
NEW QUESTION 50
A 2-node VxRail duster Is being deployed. Due to a preparation mistake, the host section fe missing. Use the VxRail simulator to fully deploy the cluster using the JSON file.
Node Names:
vcluster-esxO 15-vrack
vcluster-esxO 16-vrack
Starting IP
Address: 192.168.10.15
Rack Name: Virtual Rack
Rack Position: 15-16
Passwords: Passwordl23
!
ESXI Management
User: esxmgmt
When you have finished, continue to the next question.
Answer:
Explanation:
Pending
Send your suggestions for this question.
NEW QUESTION 51
A VxRail cluster is being deployed in a DMZ environment. What is the recommended deployment option?
- A. External vCenter Server with VxRail-deployed VDS
- B. Internal vCenter Server with internal DNS
- C. Internal vCenter Server with external DNS
- D. External vCenter Server with customer-supplied VDS
Answer: D
NEW QUESTION 52
What is the minimum number of VxRail nodes required for a vSAN storage policy with RAID-6 (Erasure Coding)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 53
An implementation engineer is tasked with setting up RecoverPoint for VMs on a single G Series chassis. How many VMs are licensed to be protected on the cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 54
A company has recently implemented a popular date center monitoring and reporting software solution. They plan to use the solution to consolidate reporting into a single platform.
What is an expected benefit of programmatically gathering VxRail information?
- A. Obtain status of all running operations on a cluster
- B. Perform node shutdowns and specific operations
- C. Automate iDRAC firmware management and status
- D. Perform pre-checks for vSAN health
Answer: D
NEW QUESTION 55
What is the maximum number of supported nodes in a VxRail Stretch Cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 56
What is a benefit of using the VxRail REST API?
- A. Remote upgrades of iDRAC related software only
- B. Automated log collection for VxRail clusters
- C. Polling for vSAN performance statistics
- D. Automated security audit of VxRail clusters
Answer: B
NEW QUESTION 57
Which command is used to restart the Loudmouth process on an ESXi node?
- A. systemcti restart loudmouth
- B. /etc/int.d/loudmouth restart
- C. /usr/IibAmiware/loudmouth/bin/loudmouthd restart
- D. systemcti restart vmware-loudmouth
Answer: B
NEW QUESTION 58
Which VxRail model can only be installed with static rack rails?
- A. P Series
- B. G Series
- C. S Series
- D. V Series
Answer: D
NEW QUESTION 59
......
Verified DES-6322 exam dumps Q&As with Correct 105 Questions and Answers: https://www.testkingpass.com/DES-6322-testking-dumps.html
Get New DES-6322 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1lKLiv2syffUKuntzeP7oOuOWQNjswOcx