Verified JN0-635 dumps Q&As - Pass Guarantee Exam Dumps Test Engine [2021]
JN0-635 dumps and 90 unique questions
JN0-635 Exam Process
The Juniper JN0-635 test will continue for 120 minutes. Besides, there are 65 multiple-choice items. You can get to know your pass/fail status immediately after the official test. Once you successfully clear such an exam and obtain your JNCIP-SEC certification, it is valid for three years.
Overview of JN0-635 Exam Content
There are various subject areas that you need to be skilled at before you can take the final JN0-635 exam:
- Edge Security Features;
- How Security Policy and Security Zone Troubleshooting works;
- NAT;
- Threat Mitigation Techniques;
- Application and Functions of Advanced IPsec.
- Tenant and Logical Systems;
- Security Compliance;
- Concepts of Firewall Filters and ACLs;
- Concepts of Layer 2 Security;
- Concepts and features of Juniper ATP;
NEW QUESTION 14
Your organization has multiple Active Directory domains to control user access. You must ensure that security policies are passing traffic based upon the users' access rights.
What would you use to assist your SRX Series devices to accomplish this task?
- A. Junos Space
- B. JIMS
- C. JSA
- D. JATP Appliance
Answer: B
NEW QUESTION 15
Click the Exhibit button.
You have configured an ADVPN that is operational. However, OSPF will not establish correctly across the ADVPN tunnels.
Referring to the exhibit, which two commands will solve the problem? (Choose two.)
- A. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 demand-circuit - B. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 dynamic-neighbors - C. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 topology advpn - D. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 interface-type nbma
Answer: A,B
NEW QUESTION 16
Which two modes are supported on Juniper Sky ATP? (Choose two.)
- A. secure wire mode
- B. tap mode
- C. private mode
- D. global mode
Answer: A,B
NEW QUESTION 17
You configured a security policy permitting traffic from the trust zone to the DMZ zone, inserted the new policy at the top of the list, and successfully committed it to the SRX Series device. Upon monitoring, you notice that the hit count does not increase on the newly configured policy.
In this scenario, which two commands would help you to identify the problem? (Choose two.)
- A. user@srx> show security shadow-policies from zone trust to zone DMZ
- B. user@srx> show security zones trust detail
- C. user@srx> show security match-policies from-zone trust to-zone DMZ source-ip 192.168.10.100/32 destination-ip 10.10.10.80/32 protocol tcp source-port 5806 destination-port 443
- D. user@srx> show security match-policies from-zone trust to-zone DMZ source-ip 192.168.10.100/32 destination-ip 10.10.10.80/32 protocol tcp source-port 5806 destination-port
443 result-count 10
Answer: A,D
NEW QUESTION 18
You configured a security policy permitting traffic from the trust zone to the DMZ zone, inserted the new policy at the top of the list, and successfully committed it to the SRX Series device. Upon monitoring, you notice that the hit count does not increase on the newly configured policy.
In this scenario, which two commands would help you to identify the problem? (Choose two.) user@srx> show security zones trust detail
- A. 192.168.10.100/32
destination-ip 10.10.10.80/32 protocol tcp source-port 5806 destination-port
443 result-count 10 - B. user@srx> show security match-policies from-zone trust to-zone DMZ source-ip
- C. user@srx> show security shadow-policies from zone trust to zone DMZ
- D. 192.168.10.100/32
destination-ip 10.10.10.80/32 protocol tcp source-port 5806 destination-port
443
user@srx> show security match-policies from-zone trust to-zone DMZ source-ip
Answer: A,B
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/monitoring- troubleshooting-security-policy.html
NEW QUESTION 19
Click the Exhibit button.
Branch 1 and Branch 2 have an active VPN tunnel configured, but internal hosts cannot communicate with each other.
Referring to the exhibit, which type of configuration should be applied to solve the problem?
- A. Configure destination NAT on Branch 2 only
- B. Configure static NAT on both Branch 1 and Branch 2
- C. Configure source NAT on Branch 1
- D. Configure destination NAT on both Branch 1 and Branch 2
Answer: B
NEW QUESTION 20
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. Destination NAT is occurring
- B. Source NAT without PAT is occurring
- C. Source NAT with PAT is occurring
- D. Static NAT without PAT is occurring
Answer: C
NEW QUESTION 21
Which three roles or protocols are required when configuring an ADVPN? (Choose three.)
- A. shortcut suggester
- B. OSPF
- C. IKEv1
- D. shortcut partner
- E. BGP
Answer: A,B,D
NEW QUESTION 22
Click the Exhibit button.
While configuring the SRX345, you review the MACsec connection between devices and note that it is not working.
Referring to the exhibit, which action would you use to identify problem?
- A. Verify that the interface between the two devices is up and not experiencing errors
- B. Verify that the formatting settings are correct between the devices and that the software supports the version of MACsec in use
- C. Verify that the connectivity association key and the connectivity association key name match on both devices
- D. Verify that the transmission path is not replicating packets or correcting frame check sequence error packets
Answer: C
NEW QUESTION 23
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. You can secure inter-VLAN traffic with a security policy on this device
- B. You can secure intra-VLAN traffic with a security policy on this device
- C. The device cannot pass Layer 2 and Layer 3 traffic at the same time
- D. The device can pass Layer 2 and Layer 3 traffic at the same time
Answer: B,C
NEW QUESTION 24
You are asked to configure a new SRX Series CPE device at a remote office. The device must participate in forwarding MPLS and IPsec traffic.
Which two statements are true regarding this implementation? (Choose two.)
- A. A firewall filter must be configured to enable packet mode forwarding
- B. Host inbound traffic must not be processed by the flow module
- C. The SRX Series device can process both MPLS and IPsec with default traffic handling
- D. Host inbound traffic must be processed by the flow module
Answer: A,B
NEW QUESTION 25
Click the Exhibit button.
You have two hosts on the same subnet connecting to an SRX340 on interfaces ge-0/0/4 and ge-0/0/5.
However, the two hosts cannot communicate with each other.
Referring to the exhibit, what are two actions that would solve this problem? (Choose two.)
- A. Add an IRB interface to the VLAN
- B. Remove the ge-0/0/4 and ge-0/0/5 interfaces from the L2 security zone
- C. Put the ge-0/0/4 and ge-0/0/5 interfaces in different VLANs
- D. Set the SRX340 to Ethernet switching mode and reboot
Answer: B,D
NEW QUESTION 26
Click the Exhibit button.
You are asked to look at a configuration that is designed to take all traffic with a specific source IP address and forward the traffic to a traffic analysis server for further evaluation. The configuration is not working as intended.
Referring to the exhibit, which change must be made to correct the configuration?
- A. Create a routing instance named default
- B. Apply the filter as an input filter on interface xe-0/2/1.0
- C. Apply the filter as an output filter on interface xe-0/1/0.0
- D. Apply the filter as an input filter on interface xe-0/0/1.0
Answer: D
NEW QUESTION 27
You are configuring transparent mode on an SRX Series device. You must permit IP-based traffic only, and BPDUs must be restricted to the VLANs from which they originate.
Which configuration accomplishes these objectives?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
Explanation/Reference: https://www.oreilly.com/library/view/juniper-srx-series/9781449339029/ch06.html
NEW QUESTION 28
Click the Exhibit button.
While configuring the SRX345, you review the MACsec connection between devices and note that it is not working.
Referring to the exhibit, which action would you use to identify problem?
- A. Verify that the interface between the two devices is up and not experiencing errors
- B. Verify that the formatting settings are correct between the devices and that the software supports the version of MACsec in use
- C. Verify that the connectivity association key and the connectivity association key name match on both devices
- D. Verify that the transmission path is not replicating packets or correcting frame check sequence error packets
Answer: C
NEW QUESTION 29
Click the Exhibit button.
You have two hosts on the same subnet connecting to an SRX340 on interfaces ge-0/0/4 and ge-0/0/5. However, the two hosts cannot communicate with each other.
Referring to the exhibit, what are two actions that would solve this problem? (Choose two.)
- A. Add an IRB interface to the VLAN
- B. Remove the ge-0/0/4 and ge-0/0/5 interfaces from the L2 security zone
- C. Put the ge-0/0/4 and ge-0/0/5 interfaces in different VLANs
- D. Set the SRX340 to Ethernet switching mode and reboot
Answer: B,D
NEW QUESTION 30
Click the Exhibit button.
Referring to the exhibit, which three topologies are supported by Policy Enforcer? (Choose three.)
- A. Topology 2
- B. Topology 1
- C. Topology 5
- D. Topology 4
- E. Topology 3
Answer: B,D,E
NEW QUESTION 31
Your SRX Series device does not see the SYN packet.
What is the default action in this scenario?
- A. The device will forward the subsequent packets and the session will be established
- B. The device will forward the subsequent packets and the session will not be established
- C. The device will drop the subsequent packets and the session will be established
- D. The device will drop the subsequent packets and the session will not be established
Answer: D
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-tcp-session- checks.html
NEW QUESTION 32
......
JN0-635 Dumps for Pass Guaranteed - Pass JN0-635 Exam: https://www.testkingpass.com/JN0-635-testking-dumps.html
JN0-635 Exam Dumps - Try Best JN0-635 Exam Questions: https://drive.google.com/open?id=1YxEEXBg7CCHEB0KkkaWw6dc3Xb30qfdr