Pass Your DES-1221 Exam Easily With 100% Exam Passing Guarantee [2021]
DES-1221 Dumps are Available for Instant Access from TestkingPass
Conclusion
Going full swing into the Dell DES-1221 test ensures you walk away with the accreditation and become proficient in implementing PowerStore solutions. For success, learn with the official courses and study the available guides that capture its aim. Becoming an implementation engineer takes proper backup and this is what the exam offers.
Training Options for DES-1221 Exam
The recommended curriculum for training includes two options when it comes to Dell employees. The first one comprises nine courses, while the second one consists of two. These programs cover every aspect of the DES-1221 evaluation. The first set of courses includes Concepts & Features; Installation; Installation Cabling; Implementation; Implementation Configuration; and Administration. The others are Migration; Basic Troubleshooting; and Upgrades. All these are on-demand classes. On the other hand, the second set comprises the Upgrades on-demand course as well as Installation & Implementation course, which is either classroom or virtual classroom-based.
There are also study alternatives for Dell partners as well as customers, and these appear in two options too. The first one includes the two on-demand courses about Concepts, Features, as well as Migration for PowerStore and Implementation & Administration for PowerStore. The other which is virtual classroom or classroom-based includes a single course on Implementation & Administration of PowerStore.
More Exam Facts
The central point of the exam syllabus involves configuring, administering, migrating, upgrading, as well as basic troubleshooting tasks for PowerStore. Other topics that those sitting for the test can possibly face include concepts as well as features of this solution, cabling, implementation, and configuration. Also, questions on working with software and hardware will be there.
When it comes to the format, DES-1221 test is set to include two sections. Section 1 has 54 questions and timing of 1.5 hours while Section 2 includes 6 simulations that should be done within a duration of 30 minutes. The passing mark for Section 1 is 60% and that for Section 2 is 66%. One should meet the minimum score for each section to pass the exam.
NEW QUESTION 24
Refer to the Exhibit.
Which port location in the graphic is used for network management connectivity on a PowerStore T?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 25
When a Volume is selected for the intercluster migration, what other data services associated with the volume will also be moved with it?
- A. NAS Servers and File.systems
- B. Replications and Volume Groups
- C. Thin Clones and File systems
- D. Thin Clones and snapshots
Answer: D
NEW QUESTION 26
A PowerStore T cluster has 3 appliances. Users are unable to access NAS services. What might be the issue?
- A. NAS appliance failover is incorrectly configured
- B. Master appliance is off-line
- C. Resource balancer service has failed
- D. Trial license is expired
Answer: A
NEW QUESTION 27
An administrator received a request to provision a new volume. Use the simulator to provision a volume of
50 GB with a performance policy of high for their host named "ApplicationTeam". When you have finished using the simulator, click Next.
Answer:
Explanation:
check the answer below in explanation.
Explanation
Below are the exhibits solution for this simulation.
NEW QUESTION 28
What describes the process used in the Import External Storage migration architecture?
- A. Plugin on PowerStore communicates over the control path to orchestrator on the host and controls the multipathing active path to storage
- B. Orchestrator on PowerStore communicates over the control path to the host plugin and controls the multipathing active path to storage
- C. Orchestrator on PowerStore communicates over the data path to the host plugin and controls the multipathing active path to storage
- D. Plugin on PowerStore communicates over the data path to orchestrator on the host and controls the multipathing active path to storage
Answer: D
Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/importing-external- storage-to-powerstore-overview?guid=guid-6fef77c4-d4c9-49c6-8de2-efd67aa52ca5
NEW QUESTION 29
A customer is new to PowerStore and asks if there are any differences between the A and B back-end ports. What is the correct response?
- A. All ports on the base enclosure are output ports
- B. All ports on the base enclosure are input ports
- C. "A" ports are output ports and "B" ports are input ports
- D. "A" ports are input ports and "B" ports are output ports
Answer: D
NEW QUESTION 30
An administrator receives an alert on a PowerStore Cluster with three appliances:
The appliance A1 is projected to run out of space in 8 days Capacity utilization is above 90 percent Which tools are available to assist the Administrator with a potential resolution?
- A. System Optimization
- B. Thin provision conversion wizard
- C. Space reclamation wizard
- D. Assisted Migration
Answer: D
NEW QUESTION 31
What are the IP requirements for ICW on PowerStore X and PowerStore T models?
- A. PowerStore T requires four management IP addresses and PowerStore X requires six management IP addresses
- B. PowerStore T requires five management IP addresses and PowerStore X requires six management IP addresses
- C. PowerStore T requires seven storage IP addresses and PowerStore X requires three storage IP addresses
- D. PowerStore T requires three storage IP addresses and PowerStore X requires five storage IP addresses
Answer: B
Explanation:
Explanation
Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-ntwk-plang/ip-address- requirements-for-initial-configuration?guid=guid-cdb61296-b698-47fb-92ce-284f784cbc2d&lang=en-us
NEW QUESTION 32
What does a Storage Administrator need to consider about Resource Balance when assigning volumes?
- A. Whether the appliance is online
Appliance failure status
Cluster utilization - B. Whether the appliance is offline
Appliance failure status
Capacity utilization - C. Whether the Node is offline
Appliance failure status
Node utilization - D. Whether the Cluster is offline
Node failure status
I/O utilization
Answer: B
NEW QUESTION 33
A VM administrator uses their PowerStore user account and noticed they are unable to change their password. Why?
- A. Validate user in Active Directory not set
- B. VM Administrator role cannot set password
- C. Extended schema for Unix users in Active Directory not set
- D. In settings > users: enable allow user to change password not set
Answer: D
NEW QUESTION 34
An administrator assigns a protection policy to a volume group. Volume1, Volume2, Volume3 are put into the volume group. Later it is decided that Volume2 should be replicated at a different time. Volume2 is removed from the volume group. The administrator attempts to assign a new protection policy to Volume2 and the option is greyed out.
Why is the option greyed out?
- A. Still has associated Volume-Group snapshots
- B. Requires a snapshot rule and a replication rule
- C. Requires a replication rule not a protection policy
- D. Already has a protection policy from the Volume-Group
Answer: A
NEW QUESTION 35
A storage administrator has provisioned 10*2GB volumes. 400MB of data is written to each of the ten volumes. What is the Thin Savings ratio for this configuration?
- A. 4:1
- B. 3:1
- C. 6:1
- D. 5:1
Answer: C
NEW QUESTION 36
How is the VASA provider registered with vSphere when connecting to a PowerStore X system?
- A. Built into the PowerStore X system code
- B. Manually added from vCenter server using add storage provider option
- C. Automatically added during Initial Configuration
- D. VASA is unsupported in PowerStore X models
Answer: C
Explanation:
Reference:
https://www.delltechnologies.com/en-ca/collaterals/unauth/white-papers/products/storage/h18116- dell-emc-powerstore-vmware-vsphere-best-practices.pdf (17)
NEW QUESTION 37
An administrator has performed the Cutover operation for an import session from a VNX2 source storage system.
What is a result of the operation?
- A. Host is removed from the VNX2 Storage Group
- B. Storage Group containing the imported LUN is deleted
- C. Imported LUN is deleted from the VNX2
- D. Imported LUN is removed from the VNX2 Storage Group
Answer: D
Explanation:
Explanation/Reference: https://laptrinhx.com/what-is-dell-emc-powerstore-part-7-importing-external-storage-
146661351/
NEW QUESTION 38
What describes the Import External Storage feature?
- A. A native data migration feature of PowerStore that imports external block storage to PowerStore
- B. An external plugin feature for hosts to tune application workload IO on PowerStore NVMe based storage
- C. A feature external to PowerStore that orchestrates vMotion movement of virtual machines onto PowerStore X systems
- D. A native network configuration feature of PowerStore that configures external Ethernet switching for PowerStore installation
Answer: A
Explanation:
Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/importing-external- storage-to-powerstore-overview?guid=guid-6fef77c4-d4c9-49c6-8de2-efd67aa52ca5
NEW QUESTION 39
......
Study resources for the Valid DES-1221 Braindumps: https://www.testkingpass.com/DES-1221-testking-dumps.html
Latest DCS-IE DES-1221 Actual Free Exam Questions: https://drive.google.com/open?id=1hRmsFwkQbFM_qrADlugmiagGcpHOAenG