Best Quality HP HPE6-A81 Exam Questions TestkingPass Realistic Practice Exams [2023]
Critical Information To Aruba Certified ClearPass Expert Written Exam Pass the First Time
The HP HPE6-A81 exam is designed to test a candidate's expertise in ClearPass, which is an access management system developed by Aruba Networks. The exam is intended for IT professionals who are responsible for designing, implementing, and managing network security solutions using ClearPass. This certification is ideal for individuals who are looking to enhance their skills in network security and gain recognition as an expert in ClearPass.
The HPE6-A81 exam is a challenging but rewarding certification exam for IT professionals who want to demonstrate their expertise in ClearPass. This certification can open up many career opportunities and increase earning potential. Candidates should prepare for the exam by gaining practical experience with ClearPass and studying the exam topics thoroughly.
Earning the HP HPE6-A81 certification is a great way to demonstrate your expertise in ClearPass and set yourself apart in the job market. Certified professionals have demonstrated advanced skills in deploying, managing, and troubleshooting ClearPass solutions, which makes them valuable assets to any organization looking to secure their network resources. By passing this exam, you'll join a community of certified professionals who are recognized for their expertise in ClearPass and have access to exclusive resources and networking opportunities.
NEW QUESTION # 19
Refer to the exhibit.
A customer has configured Onboard in a cluster. After the Primary server's failure, the BYOD devices fail to connect to the network. Which step below is the best starting point when troubleshooting'
- A. Check if a DNS entry is available for the ClearPass hostname in the certificate, resolvable from the DNS server assigned to the client.
- B. Verify the CPPM hostname in OSCP URL under TLS authentication method is updated to localhost instead of primary server's hostname.
- C. Reboot the active ClearPass server and reconnect the client to the SSID by selecting the correct certificate when prompted.
- D. Check EAP certificate on the secondary node is issued by the same common root Certificate Authority (CA).
Answer: B
NEW QUESTION # 20
Where is the following information stored in Clear Pass?
- Roles and Posture for Connected Clients - System Health for OnGuard - Machine authentication State - CoA session info - Mapping of connected clients to NAS/NAD
- A. Insight database
- B. ClearPass system cache
- C. Multi-Master cache
- D. Endpoint database
Answer: A
NEW QUESTION # 21
A customer has deployed an OnGuard Solution to all the corporate devices using a group policy result to push the OnGuard Agtnts. The network administrator is complaining that soma of the agents are communicating to the ClearPass server that is located in a DMZ. outside the firewall The network administrator wants all of the agents System Health Validation traffic to stay inside the Management subnets.
What can the ClearPass administrator do to move the traffic only to the ClearPass Management Ports?
- A. Configure a Policy Manager Zone mapping so the OnGuard agent will use the Management Port IP.
- B. Select the correct OnGuard Agent installer, and use the one configured for Management Port for the clients.
- C. Filter TCP port 6658 on the firewall, forcing the OnGuard agent to use the ClearPass Management port.
- D. Edit the agent.conf file being deployed to the clients to use the ClearPass Management Port for SHV updates
Answer: C
NEW QUESTION # 22
Which statements are true about that integration between ClearPass Policy Manager and ClearPass Device Insight? (Select two)
- A. Policy Manager stops using ClearPass Profiler for fingerprinting and uses Device Insight Analyzer instead for endpoint in-depth data analysis.
- B. An attribute named Device Insight Tags art added to the Endpoints that art available to use in service, role-mapping, and enforcement policy Rules
- C. ClearPass Device Insight updates ClearPass Policy Manager every 60 minutes if it detects a change in device classification like device spoofing.
- D. When Device Insight integration mode is enabled. you can still use Update Fingerprint button to Update Endpoints at Configuration > Identity > Endpoints
- E. To provide enhanced profiling and reporting. additional configuration is required to transmit data in both directions between CPPM and Device Insight.
Answer: D,E
NEW QUESTION # 23
Refer to the exhibit.
A customer has just configured a Posture Policy and the T 2 -Health check Service. Next they installed the OnGuard Agent on a test client connected to the Secure_Employee SSID. When they check Access Tracker they see many WEBAUTH requests are being triggered What could be the reason'
- A. OnGuard Web-Based Health Check interval has been configured to three minutes.
- B. The OnGuard Agent is connecting to the Data Port interface on ClearPass.
- C. The OnGuard Agent trigger the events based on changing the Health Status.
- D. TCP port 6658 is not allowed between the client and the ClearPass server.
Answer: A
NEW QUESTION # 24
Refer to the exhibit.
What enforcement prof lit will be assigned to the Windows 10 MDH enabled devices if it completes user authentication and is already profiled by ClearPess?
- A. Cisco Full Access VLAN
- B. Cisco Redirect URL - Service Unavailable
- C. Cisco Redirect ACL for profiling
- D. Default - Deny Access Profile
Answer: D
NEW QUESTION # 25
Refer to the exhibit.
When creating a new report, there is in option to send report Notifications by Email Where is the email server configured?
- A. In the Insight Reports Interface under Administration on the sidebar menu
- B. In the Insight report on the next screen of the report definition
- C. In the ClearPass Policy Manager Endpoint Context Servers under Administration.
- D. In the ClearPass Policy Manager Messaging Setup under Administration.
Answer: C
NEW QUESTION # 26
Which using Allow All MAC AUTH, which authentication source should be mapped to the service?
- A. Static Host List
- B. Any Authentication source
- C. Endpoint Database
- D. Guest Device Database
Answer: A
NEW QUESTION # 27
Which statements art true about controller-initiated and server-initiated login method? (Select two)
- A. server-in it will login method should be used if the guest user s network login will be handled by the wired switch by standing the authentication request to (PPM when the user attempts a login
- B. server-initiated login method should be used if the guest users network login will be handled by the ClearPass by standing a CoA after authentication request is posted to itself when the user attempts a login
- C. Controller-initiated login method should be used if the guest user's network login will be handled by the controller-based AP to perform the HTTP post when the user attempts a login.
- D. Controller-initiated login method should be used of the guest user's network login will be handled by the guest browser to perform the HTTP port when the user attempts a login
- E. server-initiated login method should be used if the guest user's network login will be handled by ClearPass by sending the authentication request to itself when the user attempts a login
Answer: A,D,E
NEW QUESTION # 28
A corporate Clear Pass Cluster with two servers located at a single site, has both Management and Data port IP addresses configured. The Management port IPs art in the DataCenter networks subnet, while the Data port IPs are in the DMZ. What is the difference between using one Virtual IP for the AAA traffic versus sending AAA requests to the physical IPs for each server' (Select two.)
- A. By using the Virtual IP, the failover wait time is faster than using individual server IPs.
- B. The failover can be accomplished only by using Virtual IP
- C. The Individual IPs can provide failover and load balancing.
- D. Using the one Virtual IP can provide failover.
- E. One Virtual IP can be used together with the individual server IPs for load balancing.
Answer: A,D
NEW QUESTION # 29
The customer has a 19.940 loT devices connected to the network and would like to use Allow All Mac Auth to authenticate the users and enforce the action based on the condition defined with the fingerprint details of the device. Which Authorization source would you use to decide the access of the devices?
- A. Guest Device Database
- B. Clear Pass Profiler Database
- C. Endpoint Database
- D. Local User Database
Answer: A
NEW QUESTION # 30
A customer is troubleshooting a user that has complained about randomly having issues connecting the network with EAP PEAP using the Corporate Laptop. The initial checks are showing a number of authentication failures but no sign of issues with the ClearPass server or AD.
What can the Customer do to monitor this user Authentication trend closely over the next few days?
- A. configure a Report using Radius Failed Authentication template and schedule it to run every 5 mins
- B. add the user name in the Insight/Alert/Watchlitst and get the authentication failures notifications within 30 seconds
- C. add to ClearPass Insight Dashboard the Authentication Status widget for this specific user
- D. configure an Alert using Failed Authentication template with Threshold 1. Interval 5 mins
Answer: B
NEW QUESTION # 31
A customer has two different geographical sites deployed with two ClearPass servers in each site. Site A has the Publisher (CPPM1) and a subscriber (CPPM2) and Site B has two subscribers (CPPM3 S CPPM4) All wired and wireless authentication requests from the respective sites are handled by respective CPPMs deployed in the sites When both the CPPM servers in Site B are lost, the authentications from Site B is handled by Site A subscriber (CPPM2). To control the Multi-Master Cache flush and reduce the amount of inter-site traffic, the customer also created a new Policy Manager Zone (Zone1) The Site B CPPM3 & CPPM4 are part of Zone! and Site A CPPM2 is also mapped to Zone1 as it will act as the backup RADIUS server for Site B The corporate laptops are installed with Persistent agent to run the OnGuard check and the OnGuard settings are also mapped to the Zones The Site A corporate user subnets are mapped to default zone and the Site 6 corporate user subnets are mapped to Zone1. The customer has the following issue in the setup: The corporate clients from Site A authenticating against the CPPM2 as their Primary RADIUS server assigns Quarantine enforcement profile even though the user s health status is Healthy.
What is the cause of this issue?
- A. Multi-master cache also contains the roles and posture of the connected clients and is shared only with the members part of that Policy Manager Zone. CPPM2 belongs to Zone1 and the OnGuard setting for Site A is part of the default zone and the OnGuard system health validation information is sent to one of the nodes that are part of its home zone only. As Posture cache for Site A is not available with CPPM2. it fails to apply the enforcement profile based on correct health status.
- B. Multi-master cache also contains the roles and posture of the connected clients and is shared across all members part of the cluster. The OnGuard setting for Site A is part of only the default zone and the OnGuard system health validation information is sent to one of the nodes that is part of its home zone only. As the CPPM2 is also not mapped to the default zone as well as Zone1, CPPM2 fails to apply the enforcement profile based on correct health status.
- C. Multi-master cache also contains the roles and posture of the associated and unassociated clients and is shared with all members part of that Policy Manager Zone. CPPM2 belongs to Zone1 and the OnGuard setting for Site A is part of the default zone and the system health validation information is sent to one of the nodes that are part of its home zone As Posture cache for Site A hi not available with CPPMZ. it fails to apply the enforcement profile based on correct health status.
- D. Multi-master cache also contains the roles and posture of the connected clients and is shared across all members part of the cluster. The OnGuard setting for Site A is part of only the default zone and the system health validation information is sent to one of the nodes that are part of its home zone only As the OnGuard setting of the Site A corporate user subset is not mapped with default as well as Zone1. CPPM2 fails to apply the enforcement profile based on correct health status.
Answer: D
NEW QUESTION # 32
Which statements art true about the Database server certificate? (Select two)
- A. Database server certificate is optional for the ClearPass servers that are part of a Cluster.
- B. Custom Database certificate requires Subject Alternative Name (SAN) field with the DNS name of the server.
- C. A change in Database certificate will only be applicable after a reboot of the node
- D. ClearPass Policy Manager nodes validates the Database certificate while joining the cluster
- E. Database certificate can be created to take a secure backup of the ClearPass database.
Answer: B,D
NEW QUESTION # 33
A customer has acquired another company that has its own Active Directory infrastructure. The 802 1X PEAP authentication works with the customer's original Active Directory servers but the customer would like to authenticate users from the acquired company as well.
What steps are required, in regards to the Authentication Sources, in order to support this request? (Select two.)
- A. Join the ClearPass server(s) to the new AD domain.
- B. Create a new Authentication Source, type Active Directory.
- C. Create a new Authentication Source, type Generic LDAP.
- D. There is no need to join ClearPass to the new AD domain.
- E. Add the new AD server(s) as backup into the existing Authentication Source.
Answer: C,D
NEW QUESTION # 34
Refer to the exhibit.
You have configured an Onboard portal for single SSID provision. During testing you notice that the QuickConnect Application did not display the "Connect" button, only the finish button. To get connected the test user had to manually connect to the secure-HS-5007 SSID but was prompted for a username and password. Using the screenshots as a reference, how would you fix this issue?
- A. Install a public signed HTTPS web server certificate on the ClearPass server
- B. Change the network settings to use EAP-TLS for the authentication protocol.
- C. Check the network settings for the correct SSID name spelling.
- D. Configure the SSID to support both EAP-PEAP and EAP-TLS authentication method
Answer: A
NEW QUESTION # 35
Refer to the exhibit.
The customer complains that the user shown cannot log into the ClearPess Server at an administrator using the [Policy Manager Admin Network Login Service]. What could be the reason for this?
- A. The account created does not fit this purpose.
- B. The local user authentication might be disabled.
- C. The mapping on the role should be changed to [RADIUS Super Admin]
- D. The user might be used for a TACACS authentication.
Answer: A
NEW QUESTION # 36
Under OnBoard Management and Control, which option will deny the user from re-enrolling one of his devices with Onboard?
View by Certificate >> Click on the device >> Delete certificate
- A. Delete this client certificate View by Dev >> Click on the device
- B. View by Username >> Click on the user >> Delete Actions >> Delete all devices
- C. Click on the device >> Revoke certificate >> Revoke this client certificate
- D. Manage Access >> Deny access to this device View by Certificate
Answer: C
NEW QUESTION # 37
What is used to validate the EAP Certificate? (Select two.)
- A. Server Identity
- B. SAN entries
- C. Common Name
- D. Date
- E. Key usage
Answer: B,E
NEW QUESTION # 38
A customer has a Clear Pass cluster deployment with four servers, two servers at the data center and two servers at a large remote site connected over an SO-WAN solution. The customer would like to implement OnGuard. Guest Self-Registration, and 802.1 X authentication across their entire environment. During testing the customer is complaining that users connecting to an Instant Cluster Employee S5ID at the remote site, with the OnGuard Persistent Agent installed are randomly getting their health check missed.
What could be a possible cause of this behavior?
- A. The Aruba-user-role received by the IAP is filtering the TCP port 6658 to the Clear Pass servers and after 10 seconds the SSL fallback gets activated and randomly generates the issue
- B. The OnGuard Clients are automatically mapped to the Policy Manager Zone based on their IP range but an ACL on the switch could be blocking access.
- C. The traffic on the TCP port 6658 is congested due to the fact that this port is also used by the IPSec keep-alive packets of the SO-WAN solution.
- D. The ClearPass Policy Manager zones have been defined but the local IP subnets have not but properly mapped to the zones and the OnGuard Agent might connect to any of the servers in the cluster.
Answer: C
NEW QUESTION # 39
The customer would like to add a default common self-registration sponsor email under the initial value on all the ten self-registration pages created for different locations except for the guest registration page created for Sunnyvale location to use a different sponsor email in initial value. Under self-registration form fields, you have "Edit" and "Edit Base Field" Which edit options will you choose to make minimal configuration changes to implement the customer's requirement? (Select two)
- A. Update the specific sponsor email by clicking on the "Edit" option of the sponsor_email form filed on the Sunnyvale self-registration register form page
- B. Update the common sponsor email by clicking the "Edit Base Field" option of the sponsor_email form field on the one of the self-registration form page
- C. Update the sponsor email by clicking on both "Edit" and "Edit Base Field" options of the sponsor_email filed on the Sunnyvale register page
- D. Update the common sponsor email by clicking the "Edit" option of the sponsor email form field on the one of the self-registration register form page
- E. Update the specific sponsor email by clicking on "Edit Base Field" option of the sponsor_email form filed on the Sunnyvale location register form page
Answer: C,D
NEW QUESTION # 40
Your customer has read about a feature in OnGuard for OnGuard Persistent Agent and Agentless OnGuard that can display a new Posture Results web page to notify that and users with posture results for unhealthy clients after the health check is done. Where do you configure this option?
- A. Policy Manager > Configuration > Enforcement > Profiles > Add new profile with Aruba Radius Enforcement as the template, and on the Attributes tab add the Aruba-User-Role configured with the captive portal profile mapped with default Posture Check web page URL.
- B. Policy Manager > Configuration > Services > Edit the Web-base Health Check Only service, and on the posture tab enable the checkbox for the new option Show Posture Results in Guest Page and complete the service configuration by hitting save.
- C. Policy Manager > Configuration > Services > Edit the Web-base Health Check Only service, and on the posture tab under Remediation URL add the default Quarantined Blocked web page URL and complete the service configuration by hitting save.
- D. Policy Manager > Configuration > Enforcement > Profiles > Add a new profiles with Agent Enforcement as the template, and on the Attributes tab add the new Show Posture Results in Guest Page attribute and set the value for the attribute to true.
Answer: C
NEW QUESTION # 41
Refer to the exhibit.
You have set up a home lab for ACCX exam preparation with Aruba Clear Pass integrated with Aruba Controller and Instant Access Point Guest Mac Caching functionality is configured only for Aruba Controller's guest SSID and a common Web Login page is configured for both NAD devices You tested and verified the mac caching functionality for a client by connecting it to the Aruba Controller's guest SSID.
What will happen when you disconnect the client from Aruba Controller's guest SSID and connect it to Instant APs guest SSID?
- A. The client does not have to complete any authentication as the re-connection was immediate.
- B. The client will bypass the captive portal authentication by completing the MAC authentication.
- C. The client will fail the mac authentication and will be redirected to the captive portal page.
- D. The client will be redirected to the captive portal page to complete the web authentication.
Answer: B
NEW QUESTION # 42
......
HPE6-A81 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.testkingpass.com/HPE6-A81-testking-dumps.html