Prepare With Top Rated High-quality NCM-MCI-5.15 Dumps For Success in NCM-MCI-5.15 Exam
NCM-MCI-5.15 Free Certification Exam Easy to Download PDF Format 2022
NEW QUESTION 35
An administrator configure Active Directory (AD) authentication for their Nutanix environment. When login in using an AD user account, the login process takes more than one minute to complete. No delay occurs when logging a local account.
What should the administrator confirm to resolve this issue?
- A. Active directory lookups are configured to use Non-Recursive mode.
- B. The user search base for the group is configured correctly
- C. The domain controller being used is configured as a global catalog server.
- D. The service Account Username is correct for the domain.
Answer: A
NEW QUESTION 36
A customer with a four-node RF2 cluster is adding application VMs to their system. After adding these VMs, the Prism dashboard shows 81% storage utilization.
What is the consequence of running the cluster at 81% storage utilization?
- A. There is available capacity in the storage fabric and the cluster is resilient.
- B. The cluster is not resilient in the storage fabric
- C. The customer has the ability to add more VMs up to the 100% storage utilization.
- D. Node failure is imminent due to storage utilization.
Answer: A
Explanation:
Explanation
https://next.nutanix.com/how-it-works-22/recommended-maximum-storage-utilization-37234
NEW QUESTION 37
An administrator is configuring software only. Data-at-Rest Encryption on their Nutanix cluster. They are planning to deploy a third-party key management server (KMS).
Where should this server be hosted?
- A. On hardware external to the Nutanix duster
- B. As a clustered VM setup on the Nutanix cluster
- C. As a single VM on the Nutanix cluster
- D. As a single VM deployed on the host that contains the Prism leader CVM
Answer: A
Explanation:
NEW QUESTION 38
An administrator of a Nutanix Enterprise Cloud has microsegmentation enabled and a firewall VM installed.
The security team notifies the administrator that one of the VMs hosted in the environment has been exhibiting suspect network activity. The administrator wants to isolate the VM from the production network, but must still be able to access it to perform diagnostics.
What should the administrator do to meet the requirement?
- A. Disable the vNIC on the affected VM
- B. Quarantine the VM using the Forensic Method
- C. Create a firewall rule that blocks VM traffic but permits diagnostic access
- D. Create a security policy with a service chain directing that VMs traffic to the firewall VM
Answer: D
Explanation:
Explanation
Ref https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000LIelCAG
NEW QUESTION 39
A VDI environment based on AHV Cluster is not performing well. The current environment is using only one bridge (Bridge0). The administrator needs to verify if nodes are using all network cards associated to Bridge0.
Which two menus should be used to check the current configuration? (Choose two.)
- A. Host view in Network menu
- B. Host NICs tab in Hardware menu
- C. I/O Metrics tab in VM menu
- D. Network Configuration item in Settings menu
Answer: A,B
NEW QUESTION 40
An administrator responsible for a VDI environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDI VMs.
What are two impacts on the cluster? (Choose two.)
- A. Increasing CPU counts will decrease memory utilization
- B. Increase CPU utilization%
- C. Increase memory utilization%
- D. Increase CPU ready%
Answer: B,D
NEW QUESTION 41
An administrator migrates a VM onto a new Nutanix cluster. After the migration, the administrator observes the following conditions:
* Cluster memory utilization: 64%
* Cluster CPU utilization: 19%
* Cluster storage utilization: 32%
* Average VM CPU utilization: 25%
* Average VM CPU ready%: 24%
* Average VM memory utilization: 60%
Which two changes should the administrator make to improve VM performance? (Choose two.)
- A. Reduce the number of VMs on the hosts.
- B. Reduce the number of vCPUs assigned to VMs.
- C. Replace high core count CPUs with high clock rate CPUs. (also can be but is physical invas)
- D. Add more memory to the VMs.
Answer: A,B
Explanation:
Explanation
ref http://www.joshodgers.com/tag/cpu-ready/
NEW QUESTION 42
An administrator is configuring an All Flash cluster to support the following workloads:
* Full clone virtual desktops
* Hadoop
* Write heavy databases
Which three correct configuration options should the administrator use to meet the item requirements?
(Choose three.)
For each procedure, indicate whether it is a correct or incorrect procedure that must be configured to meet the item requirements using the drop-down option.
Answer:
Explanation:
Explanation
Ref:
NEW QUESTION 43
An administrator needs to make sure an RF3 cluster can survive a failure of two complete racks without negatively affecting performance. The current cluster configuration consists of the following:
* 30 All Flash Nodes: distributed 10 nodes per rack across three 42U racks
* Each node is configured with 20TB usable storage all flash (Cluster Total 600TB Usable)
* Current cluster utilization is 500TB storage
* Storage containers have Erasure Coding enabled
Which configuration changes should be made to make sure the cluster meets the requirements?
- A. Expand the cluster to 48 nodes distributed evenly across 6 racks
- B. Expand the cluster to 40 nodes distributed evenly across 5 racks
- C. Expand the cluster to 50 nodes distributed evenly across 5 racks
- D. Expand the cluster to 60 nodes distributed evenly across 6 racks
Answer: D
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_17:arc-configure-fau
NEW QUESTION 44
An administrator wants to utilize Network Visualization to monitor the physical and logical network on the Nutanix cluster. The first-hop switch has LLDP enabled. The network switch information is still not being displayed.
What is causing this problem?
- A. SNMP is not configured properly.
- B. The ISL between switches is not configured.
- C. The cluster is using RDMA-enabled NICs.
- D. br0 and br1 are not defined.
Answer: A
Explanation:
Explanation
ref:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v55:wc-network-visual
NEW QUESTION 45
An administrator has a VM that consumes large amounts of storage and has the following characteristics:
* Create large / sequential writes
* Data must be kept for years
* Data is normally only accessed at the end of the year to run report
The administrator decides to use Erasure Coding to save space.
Which feature should the administrator utilize to save space for this VM?
- A. Inline Compression
- B. Post-Process Compression
- C. Flash Mode
- D. Cache Dedup
Answer: B
NEW QUESTION 46
Refer to the exhibit.
User 1 and User 2 belong to the AAPM group
What are two descriptions of how Files perform quota management? (Choose two.)
- A. User 1 can add an 8GB file to the share without receiving notification.
- B. User 2 can add an 8GB file without receiving a notification email.
- C. User 1 can continue to add another 5GB file but will receive a daily notification email.
- D. User 2 can continue to add another 3GB file but will receive a daily notification email.
Answer: B,C
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Files-v3_6:fil-file-server-quotas-c.html#nconcept_a
NEW QUESTION 47
A customer wants to run SAP HANA on a Nutanix cluster with the following characteristics:
* AHV nodes
* SAP HANA version 2
* Production database files
Which configuration should be recommended to the customer?
- A. Do not enable compression, deduplication. or erasure coding on the storage container
- B. Start with a cluster containing three or more nodes
- C. Enable only compression for the container that contains the Production database
- D. Plate the SAP HANA Database on the same socket as CVM
Answer: A
Explanation:
Explanation
Ref:
NEW QUESTION 48
An administrator needs to make sure an RF3 cluster can survive a failure of two complete racks without negatively affecting performance. The current cluster configuration consists of the following:
* 30 All Flash Nodes: distributed 10 nodes per rack across three 42U racks
* Each node is configured with 20TB usable storage all flash (Cluster Total 600TB Usable)
* Current cluster utilization is 500TB storage
* Storage containers have Erasure Coding enabled
Which configuration changes should be made to make sure the cluster meets the requirements?
- A. Expand the cluster to 48 nodes distributed evenly across 6 racks
- B. Expand the cluster to 40 nodes distributed evenly across 5 racks
- C. Expand the cluster to 50 nodes distributed evenly across 5 racks
- D. Expand the cluster to 60 nodes distributed evenly across 6 racks
Answer: D
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_17:arc-configure-fa
NEW QUESTION 49
Refer to the exhibit.
An administrator configures Active Directory authentication as shown in the exhibit. Upon finishing setup, users are not able to log in.
What configuration change should be made to fix this issue?
- A. Change the Directory URL to use an IP rather than a name
- B. Change the plct from 389 to 636
D Change the Domain to use an IP rather than a name - C. Change leaps to https
Answer: B
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v510:mul-security-auth
NEW QUESTION 50
An administrator is deploying an application using Nutanix Volumes. After configuring the volume group and connecting the guest's iSCSI initiator to the volume group, they begin performance testing.
The administrator learns that performance on the virtual disk attached to the iSCSI initiator is far less than that of a virtual disk connected directly to the VM.
Which situation is causing this condition?
- A. The performance test is generating small block random 10.
- B. The VM's iSCSI traffic is being routed to the data services IP subnet
- C. Data Locality ensures that VM attached disks are always faster than iSCSI volumes.
- D. The duster data services IP address is a bottleneck, shared with other iSCSI traffic
Answer: D
NEW QUESTION 51
A system administrator needs to shut down an AHV node in a Nutanix cluster without causing service disruption. The administrator checks data resiliency and verifies that the cluster can tolerate a node down.
Which three steps should the administrator perform next? (Choose three.)
Answer:
Explanation:
Explanation
1 allow vms 2 sd CVM 3 sd node
NEW QUESTION 52
......
Get 100% Success with Latest Nutanix Certified Master NCM-MCI-5.15 Exam Dumps: https://www.testkingpass.com/NCM-MCI-5.15-testking-dumps.html