Online Questions - Valid Practice To your 156-315.81 Exam (Updated 616 Questions)
Practice To 156-315.81 - Remarkable Practice On your Check Point Certified Security Expert R81 Exam
NEW QUESTION # 293
Fill in the blank: The "fw monitor" tool can be best used to troubleshoot ____________________.
- A. AV issues
- B. VPN errors
- C. Authentication issues
- D. Network traffic issues
Answer: D
Explanation:
Explanation
https://supportcenter.checkpoint.com/supportcenter/portal?
eventSubmit_doGoviewsolutiondetails=&solutionid=sk30583
NEW QUESTION # 294
The CPD daemon is a Firewall Kernel Process that does NOT do which of the following?
- A. Restart Daemons if they fail
- B. Pulls application monitoring status
- C. Transfers messages between Firewall processes
- D. Secure Internal Communication (SIC)
Answer: B
Explanation:
Explanation
The CPD daemon is a Firewall Kernel Process that does not pull application monitoring status. The CPD daemon is responsible for Secure Internal Communication (SIC), restarting daemons if they fail, transferring messages between Firewall processes, and managing policy installation. References: CPD process
NEW QUESTION # 295
To find records in the logs that shows log records from the Application & URL Filtering Software Blade where traffic was dropped, what would be the query syntax?
- A. blade;"application control AND action:drop
- B. (blade: application control AND action;drop)
- C. blada: application control AND action:drop
- D. blade."application control AND action;drop
Answer: A
NEW QUESTION # 296
Fill in the blank: The IPS policy for pre-R81 gateways is installed during the _______ .
- A. Access Control policy install
- B. Threat Prevention policy install
- C. Firewall policy install
- D. Anti-bot policy install
Answer: D
Explanation:
Explanation
The IPS policy for pre-R81 gateways is installed during the Anti-bot policy install. The Anti-bot policy install includes both Anti-bot and IPS protections for pre-R81 gateways, since they share the same inspection engine.
For R81 and above gateways, the IPS policy is installed separately as part of the Threat Prevention policy install, which also includes Anti-virus and Threat Emulation protections. References: R81 Threat Prevention Administration Guide, page 15.
NEW QUESTION # 297
What should the admin do in case the Primary Management Server is temporary down?
- A. The Secondary will take over automatically Change the IP in SmartConsole to logon to the private IP of the Secondary Management Server.
- B. Run the 'promote_util' to activate the Secondary Management server
- C. Logon with SmartConsole to the Secondary Management Server and choose "Make Active' under Actions in the HA Management Menu
- D. Use the VIP in SmartConsole you always reach the active Management Server.
Answer: D
NEW QUESTION # 298
Which of the following will NOT affect acceleration?
- A. Connections that have a Handler (ICMP, FTP, H.323, etc.)
- B. Multicast packets
- C. Connections destined to or originated from the Security gateway
- D. A 5-tuple match
Answer: D
Explanation:
Explanation
Check Point's SecureXL technology, which is responsible for acceleration, has certain limitations and conditions under which acceleration may not occur. In this context, the question is asking about factors that will NOT affect acceleration.
Option B, "A 5-tuple match," will not affect acceleration. A 5-tuple match refers to the matching of source IP, source port, destination IP, destination port, and protocol. SecureXL can accelerate traffic that matches these criteria, but it's not a factor that hinders acceleration.
Options A, C, and D can all affect acceleration:
Option A mentions "Connections destined to or originated from the Security gateway," which implies that SecureXL acceleration can apply to these connections.
Option C mentions "Multicast packets," and SecureXL may have limitations in handling multicast traffic efficiently.
Option D mentions "Connections that have a Handler (ICMP, FTP, H.323, etc.)," and certain protocols (such as FTP) may require special handling and might not be fully accelerated by SecureXL.
References: Check Point Certified Security Expert R81 Study Guide
NEW QUESTION # 299
Kofi, the administrator of the ALPHA Corp network wishes to change the default Gaia WebUI Portal port number currently set on the default HTTPS port. Which CLISH commands are required to be able to change this TCP port?
- A. set Gaia-portal port <new port number>
- B. set web ssl-port <new port number>
- C. set Gaia-portal https-port <new port number>
- D. set web https-port <new port number>
Answer: B
Explanation:
Explanation
The CLISH command to change the default Gaia WebUI Portal port number is set web ssl-port <new port number>. This command will change the port that the WebUI listens on for HTTPS connections. After changing the port, you need to save the configuration with save config and verify that the change was applied with show web ssl-port. You also need to update the Main URL in the Platform Portal section of the gateway object in SmartConsole and install the policy.
NEW QUESTION # 300
Please choose the path to monitor the compliance status of the Check Point R81.10 based management.
- A. Logs & Monitor --> New Tab --> Open compliance View
- B. Security & Policies --> New Tab --> Compliance View
- C. Compliance blade not available under R81.10
- D. Gateways & Servers --> Compliance View
Answer: A
Explanation:
Explanation
The path to monitor the compliance status of the Check Point R81.10 based management is Logs & Monitor > New Tab > Open compliance View. Compliance View is a feature that allows administrators to monitor and assess the compliance level of their Check Point products and security policies based on best practices and industry standards. Compliance View provides a dashboard that shows the overall compliance status, compliance score, compliance trends, compliance issues, compliance reports, and compliance blades for different security aspects, such as data protection, threat prevention, identity awareness, etc. To access Compliance View in R81.10 SmartConsole, administrators need to go to Logs & Monitor > New Tab > Open compliance View. The other options are either incorrect or not available in R81.10.
NEW QUESTION # 301
The admin is connected via ssh lo the management server. He wants to run a mgmt_dl command but got a Error 404 message. To check the listening ports on the management he runs netstat with the results shown below. What can be the cause for the issue?
- A. Wrong Management API Access setting^for Ihe client IP To correct it go to SmartConsole / Management & Settings / Blades / Management API and press "Advanced Settings..' and choose GUI clients or ALL IP's.
- B. The management permission in the user profile is mrssing. Go to SmartConsole / Management & Settings I Permissions & Administrators / Permission Profiles. Select the profile of the user and enable
'Management API Login' under Management Permissions - C. The API didn't run on the default port check it with api status' and add '-port 4434' to the mgmt_clt command.
- D. The API is not running, the services shown by netstat are the gaia services. To start the API run 'api start'
Answer: D
Explanation:
Explanation
The error message "Error 404. The Management API server is not available. Please check that the Management API server is up and running." indicates that the API is not running on the Management Server.
The netstat command shows that there is no process listening on port 4434, which is the default port for the API. To start the API, the command 'api start' should be used. The other options are not relevant to this issue.
References: Check Point R81 Installation and Upgrade Guide, page 18.
NEW QUESTION # 302
To fully enable Dynamic Dispatcher on a Security Gateway:
- A. Using cpconfig, update the Dynamic Dispatcher value to "full" under the CoreXL menu.
- B. Edit/proc/interrupts to include multik set_mode 1 at the bottom of the file, save, and reboot.
- C. run fw multik set_mode 1 in Expert mode and then reboot.
- D. run fw ctl multik set_mode 9 in Expert mode and then Reboot.
Answer: D
NEW QUESTION # 303
Which options are given on features, when editing a Role on Gaia Platform?
- A. Read/Write, Read Only, None
- B. Read Only, None
- C. Read/Write, None
- D. Read/Write, Read Only
Answer: A
NEW QUESTION # 304
With MTA (Mail Transfer Agent) enabled the gateways manages SMTP traffic and holds external email with potentially malicious attachments. What is required in order to enable MTA (Mail Transfer Agent) functionality in the Security Gateway?
- A. Traffic on port 25
- B. Endpoint Total Protection
- C. Threat Cloud Intelligence
- D. Threat Prevention Software Blade Package
Answer: D
Explanation:
Explanation
To enable MTA (Mail Transfer Agent) functionality in the Security Gateway, the Threat Prevention Software Blade Package is required. The Threat Prevention Software Blade Package includes the Anti-Virus, Anti-Bot, and Threat Emulation blades, which can scan and hold external email with potentially malicious attachments. The MTA functionality allows the Security Gateway to act as an SMTP relay between the mail server and the Internet, and apply Threat Prevention policies to the email traffic. The other options are either not related or not sufficient to enable MTA functionality. R
NEW QUESTION # 305
Which process handles connection from SmartConsole R81?
- A. cpd
- B. cpmd
- C. cpm
- D. fwm
Answer: C
Explanation:
Explanation
The process that handles connection from SmartConsole R81 is cpm. Cpm stands for Check Point Management, and it is the main process that runs on the Security Management Server and interacts with SmartConsole clients. Cpm is responsible for managing policies, objects, logs, tasks, and other management functions. The other processes are either obsolete or irrelevant for SmartConsole connection.
NEW QUESTION # 306
How often does Threat Emulation download packages by default?
- A. Once per day
- B. Once a week
- C. Twice per day
- D. Once an hour
Answer: A
Explanation:
Explanation
Threat Emulation downloads packages by default once per day. The packages contain updates for the Threat Emulation engine, signatures, and images. The download frequency can be changed in the Threat Prevention policy settings. References: Threat Emulation Administration Guide, Threat Prevention R81 Release Notes
NEW QUESTION # 307
Kurt is planning to upgrade his Security Management Server to R81.X. What is the lowest supported version of the Security Management he can upgrade from?
- A. R75 Gaia
- B. R77.X Gaia
- C. R75 Splat
- D. R76 Splat
Answer: A
Explanation:
Explanation
The lowest supported version of the Security Management that can be upgraded to R81.X is R75 Gaia. This means that the Security Management Server must be running on the Gaia Operating System and have a version of R75 or higher. R76 Splat, R77.X Gaia, and R75 Splat are not supported for upgrading to R81.X1.
References: 1: Check Point Software, Getting Started, Supported Upgrade Paths.
NEW QUESTION # 308
......
True 156-315.81 Exam Extraordinary Practice For the Exam: https://www.testkingpass.com/156-315.81-testking-dumps.html
Get 100% Passing Success With True 156-315.81 Exam: https://drive.google.com/open?id=1H8U6yHno-g1K9eSLO5cTWyV0pt_wTj_B