NSE6_FSW-7.2 Dumps PDF - NSE6_FSW-7.2 Real Exam Questions Answers
Get Started: NSE6_FSW-7.2 Exam [2024] Dumps Fortinet PDF Questions
Fortinet NSE6_FSW-7.2 Exam is a certification program that validates the skills and knowledge of network security professionals in deploying and managing FortiSwitch products. Fortinet NSE 6 - FortiSwitch 7.2 certification is recognized worldwide and is highly valued in the IT industry. Passing NSE6_FSW-7.2 exam is an excellent way for network security professionals to demonstrate their expertise and enhance their career prospects.
Fortinet NSE6_FSW-7.2 exam is an essential certification for network professionals who want to demonstrate their skills and knowledge in FortiSwitches. It is a globally recognized certification that can enhance the candidate's career prospects and provide them with opportunities to work on complex networking projects. NSE6_FSW-7.2 exam is designed to test the candidate's understanding of FortiSwitches, and passing this certification can help network professionals to stand out in the competitive IT industry.
NEW QUESTION # 26
Which feature should you enable to reduce the number or unwanted IGMP reports processed by the IGMP querier?
- A. Enable IGMP snooping proxy.
- B. Enable IGMP flood unknown multicast traffic on the global setting.
- C. Enable the IGMP flood reports setting on the mRouter port.
- D. Enable the IGMP flood setting on the static port for all multicast groups.
Answer: A
NEW QUESTION # 27
Refer to the exhibits
Traffic arriving on port2 on FortiSwitch is tagged with VLAN ID 10 and destined for PC1 connected on port1. PC1 expects to receive traffic untagged from port1 on FortiSwitch.
Which two configurations can you perform on FortiSwitch to ensure PC1 receives untagged traffic on port1? (Choose two.)
- A. Remove VLAN 10 from the allowed VLANs and add it to untagged VLANs on port1.
- B. Add VLAN ID 10 as a member of the untagged VLANs on port1.
- C. Add the MAC address of PCI as a member of VLAN 10.
- D. Enable Private VLAN on VLAN 10 and add VLAN 20 as an isolated VLAN.
Answer: B,C
NEW QUESTION # 28
Refer to the exhibits.
You are asked to ensure that managed FortiSwitch devices are reachable by other devices, such as SNMP and other management tools across your network.
Which setting must you configure to ensure traffic from other devices in the network reaches FortiSwitch?
- A. Enable NAC settings to select the onboarding VLAN.
- B. Select a specific default gateway provided to FortiSwitch as an upstream device.
- C. Change the FortiLink interface IP address and DHCP server address range.
- D. Recreate the FortiLink interface with a nonaggregate setting.
Answer: C
NEW QUESTION # 29
Exhibit.
The exhibit shows the current status of the ports on the managed FortiSwitch.
Access-1.
Why would FortiGate display a serial number in the Native VLAN column associated with the port23 entry?
- A. A standalone switch with the showm serial number is connected on por123.
- B. Port23 is configured as the dedicated management interface.
- C. Port23 is a member of a trunk that uses the Access-1 FortiSwitch senal number as the name of the trunk.
- D. Ports connect to adjacent FortiSwitch devices will show their.serial number as the na-tive VLAN
Answer: D
NEW QUESTION # 30
Which Ethernet frame can create Layer 2 flooding due to all bytes on the destination MAC address being set to all FF?
- A. The unicast Ethernet frame
- B. The anycast Ethernet frame
- C. The multicast Ethernet frame
- D. The broadcast Ethernet frame
Answer: D
NEW QUESTION # 31
FortiGate is unable to establish a tunnel with the FortiSwitch device it is supposed to manage Based on the debug output shown in the exhibit, what is the reason for the failure?
- A. The handshake process timed out before FortiSwitch responded.
- B. The CAPWAP tunnel failed to come up due to a mismatch in time.
- C. FortiSwitch has disabled FortiLink and is only managed as a standalone.
- D. DTLS client hello had the incorrect pre-shared key.
Answer: B
NEW QUESTION # 32
Refer to the exhibit.
The profile shown in the exhibit is assigned to a group of managed FortiSwitch ports, and these ports are connected to endpoints which are powered by PoE.
Which configuration action can you perform on the LLDP profile to cause these endpoints to exchange PoE information and negotiate power with the managed FortiSwitch?
- A. Assign a new LLDP profile to handle different LLDP-MED TLVs.
- B. Define an LLDP-MED location ID to use standard protocols for power.
- C. Add power management as part of LLDP-MED TLVs to advertise.
- D. Create new a LLDP-MED application type to define the PoE parameters.
Answer: C
NEW QUESTION # 33
Which statement about the use of the switch port analyzer (SPAN) packet capture method is true?
- A. The monitoring device must be connected to the same switch where the traffic is being mirrored
- B. Mirrored traffic can be sent across multiple switches.
- C. SPAN can be configured only on a standalone FortiSwitch.
- D. Traffic on the management interface can be mirrored and captured by the monitoring device.
Answer: D
NEW QUESTION # 34
Refer to the exhibit.
The exhibit shows the current status of the ports on the managed FortiSwitch. Access-1.
Why would FortiGate display a serial number in the Native VLAN column associated with the port23 entry?
- A. port23 is configured as the dedicated management interface.
- B. A standalone switch with the shown serial number is connected on port23.
- C. port23 is a member of a trunk that uses the Access-1 FortiSwitch serial number as the name of the trunk.
- D. Ports connected to adjacent FortiSwitch devices show their serial number as the native VLAN.
Answer: B
NEW QUESTION # 35
Exhibit.
port24 is the only uplink port connected to the network where access to FortiSwitch management services is possible. However, FortiSwitch is still not accessible on the management interface. Which two actions should you take to fix the issue and access FortiSwitch? (Choose two.)
- A. You must add VLAN ID 200 to the allowed VLANS on internal.
- B. You must allow VLAN ID 4094 on port24, if management traffic is tagged.
- C. You must add port24 native VLAN as an allowed VLAN on internal.
- D. You should use VLAN ID 4094 as the native VLAN on port24.
Answer: B,D
NEW QUESTION # 36
Which LLDP-MED Type-Length-Values does FortiSwitch collect from endpoints to track network devices and determine their characteristics?
- A. Power management
- B. Network policy
- C. Inventory management
- D. Location
Answer: C
NEW QUESTION # 37
Refer to the exhibit.
What two conclusions can be made regarding DHCP snooping configuration? (Choose two.)
- A. Maximum value to accept clients DHCP request is configured as per DHCP server range.
- B. FortiSwitch is configured to trust DHCP replies coming on FortiLink interface.
- C. Global configuration for DHCP snooping is set to forward DHCP client requests on all ports in the VLAN.
- D. DHCP clients that are trusted by DHCP snooping configured is only one.
Answer: B,D
NEW QUESTION # 38
Refer to the exhibits.
Port1 and port2 are the only ports configured with the same native VLAN 10.
What are two reasons that can trigger port1 to shut down? (Choose two.)
- A. An endpoint sent a BPDU on port1 that it received from another interface.
- B. Loop guard frame sourced from port 1 was received on port 1.
- C. port1 was shut down by loop guard protection.
- D. STP triggered a loop and applied loop guard protection on port1.
Answer: A,D
NEW QUESTION # 39
Which packet capture method allows FortiSwitch to capture traffic on trunks and management interfaces?
- A. TCP dump
- B. SPAN
- C. sFlow
- D. Sniffer profile
Answer: C
NEW QUESTION # 40
Exhibit.
port1 and port2 are the only ports configured with the same native VLAN 10.
What are two reasons that can trigger port1 to shut down? (Choose two.)
- A. STP triggered a loop and applied loop guard protection on port1.
- B. An endpoint sent BPDU on port1 it received from another interface.
- C. Oport1 was shut down by loop guard protection.
- D. Loop guard frame sourced from port 1 was received VLAN 10 ports.
Answer: C,D
NEW QUESTION # 41
What can an administrator do to maintain a FortiGate-compatible FortiSwitch configuration when changing the management mode from standalone to FortiLinK?
- A. Use a migration tool based on Python script to convert the configuration.
- B. Enable the FortiLink setting on FortiSwitch before the authorization process.
- C. FortiGate automatically saves the existing FortiSwitch configuration during the FortiLink management process.
- D. Register FortiSwitch to FortiSwitch Cloud to save a copy before managing with FortiGate.
Answer: D
NEW QUESTION # 42
What feature can network administrators use to segment network operations and the administration of managed FortiSwitch devices on FortiGate?
- A. FortiGate clustering protocol
- B. Multi-chassis link aggregation trunk
- C. FortiGate multi-tenancy
- D. FortiLink split interface
Answer: C
NEW QUESTION # 43
Which statement about using MAC, IP, and protocol-based VLANs on FortiSwitch is true?
- A. Endpoints are required to use the same FortiSwitch port to remain members of the VLAN.
- B. It provides benefits that can be obtained when using 802.1X authentication.
- C. lt is a scalable and secure solution in comparison to other Layer 2 security measures.
- D. FortiSwitch uses only the Ethernet type to assign traffic to VLANs.
Answer: B
NEW QUESTION # 44
......
The FortiSwitch series is one of the critical components of the Fortinet Security Fabric, which is a comprehensive security architecture that provides advanced threat protection and network security. The FortiSwitch series is designed to deliver high-performance, scalable, and secure Ethernet solutions. Therefore, the NSE6_FSW-7.2 certification exam covers topics such as VLANs, Link Aggregation, STP, RSTP, MSTP, and FortiLink.
NSE6_FSW-7.2 Premium Exam Engine pdf Download: https://www.testkingpass.com/NSE6_FSW-7.2-testking-dumps.html
Verified NSE6_FSW-7.2 Bundle Real Exam Dumps PDF: https://drive.google.com/open?id=1jFs1au4RUCH3GgAEAkr3x-2GJVKVj86H