New 300-610 Test Materials & Valid 300-610 Test Engine
300-610 Updated Exam Dumps [2023] Practice Valid Exam Dumps Question
To prepare for the Cisco 300-610 exam, candidates are advised to take the Designing Cisco Data Center Infrastructure (DCID) course. This course covers all the topics that are tested in the exam and provides hands-on experience in designing data center infrastructure using Cisco technologies. Candidates can also use study materials such as books, practice exams, and online courses to prepare for the exam.
NEW QUESTION # 122
A engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure. Which tool meets these requirements?
- A. Cisco tetration
- B. Cisco UCS director
- C. Cisco data center network manager
- D. Cisco intersight
Answer: D
NEW QUESTION # 123
An engineer must interconnect two geographically separated data centers. The service provide offers a Layer 2 metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between sites requires a line-rate throughput regardless of the packet size and speed. Which solution meets these requirements?
- A. L2TPv2
- B. IPsec
- C. L2TPv3
- D. MACsec
Answer: D
Explanation:
Reference:
NEW QUESTION # 124
An engineer develops a framework for automatic repetitive tasks needed to manage a Cisco Nexus 9000 Series Switch. The engineer plans to use a programmatic interface and must keep these considerations in mind.
* The customer's environment requires the script to authenticate before executing further actions.
* The customer's security requirements mandate the use of HTTP transport.
* The automation team is familiar with parsing messages encoded in XML or JSON format.
Which solution meets these requirements?
- A. NX-API
- B. SNMPv3
- C. RESTCONF
- D. gRPC
Answer: A
NEW QUESTION # 125
Which two automation requirements are met when Puppet is used? (Choose two.)
- A. Immediately push configuration updates to servers.
- B. Enable one-off infrastructure changes to be performed manually.
- C. Provide support for writing new modules in Python.
- D. Enable clients to pull changes to configuration files.
- E. Enable clients to pull changes without installing an agent.
Answer: A,E
NEW QUESTION # 126
An engineer must design a DNS service available to multiple network zones as a shared service. The network zones are deployed as VRFs within the data center network and no firewall is available for communication between VRFs.
Which protocol is needed to implement the shared services?
- A. ISIS
- B. VXLAN
- C. OSPF
- D. BGP
Answer: B
NEW QUESTION # 127
What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?
- A. E-Trunk
- B. vPC+
- C. SAN port channel
- D. LACP port channel
Answer: D
NEW QUESTION # 128
A company must introduce a scalable network automation tool to deploy, configure, and manage thousands of network devices and servers. The company servers already have been security-hardened and must not have any additional software installed on them. The security policy mandates the use of a secure communication protocol that supports authentication and encryption for managing the servers.
Which two automation tools must be used to meet these requirements? (Choose two.)
- A. CFEngine
- B. Chef
- C. SaltStack
- D. Ansible
- E. Puppet
Answer: C,E
NEW QUESTION # 129
DRAG DROP
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Select and Place:
Answer:
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fs_bfd.html#wp1238898
NEW QUESTION # 130
Drag the requirements from the left onto the correct policy types on the right.
Answer:
Explanation:
NEW QUESTION # 131
An engineer must connect an existing Cisco Fabric Interconnect to an IP-based storage array. The connection be a channel made directly between the fabric interconnect expansion module and the storage array. The engineer must also consider that the environment is running FCoE for storage and uses QoS to prioritize traffic. Which port type should be used to meet these requirements?
- A. server
- B. Network
- C. Appliance
- D. Uplink
Answer: C
Explanation:
https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/ucs-5100-series-blade-server-chassis/116075-ucs-app-connectivity-tshoot-00.html
NEW QUESTION # 132
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION # 133
Refer to the exhibit.
A high-availability setup for iSCSI is designed with the host running ISCSI software. Each storage port on the MDS exports the same two Fibre Channel target ports with different ISCSI target names. In this design, how many ISCSI session are created from the host so that recovery occurs if any component fails?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Reference:
NEW QUESTION # 134
An engineer is expanding an existing ISCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used
{prefix}. 2019-01.com.acme.123:00. ftd0cb21.bcb389458389
Which addressing scheme was used in the environment?
- A. Fibre Channel ID
- B. Extended Unique identifier
- C. ISCSI Qualified Name
- D. Network Address Authority
Answer: C
NEW QUESTION # 135
A network consultant evaluates the Cisco UCS Fabric Interconnect SAN configuration, which must meet these requirements:
All traffic must pass over the upstream device for switching and domain IDs must be preserved in the fabric.
Each server should be pinned to one designated upstream interface and for the traffic to pass through the pinned port.
Which Fabric Interconnect SAN operational mode meets these requirements?
- A. NPIV
- B. switch
- C. end host
- D. Fibre Channel
Answer: B
NEW QUESTION # 136
Refer to the exhibit.
The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?
- A. 2158 bytes
- B. 2240 bytes
- C. 2000 bytes
- D. 9000 bytes
Answer: C
NEW QUESTION # 137
An engineer finishes the initial set up of a VXLAN EVPN network. The engineer is asked to plan for connectivity that supports redundancy and extends multiple virtual routing and forwarding domains. The requirement is to use the same default gateway addressing across all leaf switches that belong to the VXLAN network. Which two solution must be used to meet these requirements? (Choose two)
- A. Distributed anycast gateway
- B. spanning tree protocol
- C. Inter-site network
- D. DC interconnect
- E. VRF-lite
Answer: A,D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-12/configuration_guide/vxlan/b_1612_bgp_evpn_vxlan_9300_cg/configuring_evpn_vxlan_anycast_gateway.html
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-739942.html
NEW QUESTION # 138
Which orchestration tool provides a graphical interface to manage LAN and SAN fabrics?
- A. Cisco Data Center Network Manager
- B. Cisco Virtual Topology System
- C. Cisco Nexus Fabric Manager
- D. Cisco CloudCenter
Answer: A
NEW QUESTION # 139
An engineer is implementing a Cisco UCS environment The requirements for the solution are for the MAC addresses to be learned only on the server-facing ports. The use of the Spanning Tree Protocol must be avoided. Also, the engineer must have deterministic traffic handling from blades to uplink ports.
Which two settings must be selected to meet these requirements? (Choose two.)
- A. static pinning
- B. switching mode
- C. NPIV mode
- D. dynamic pinning
- E. end-host mode
Answer: A,E
NEW QUESTION # 140
A company runs mission -critical infrastructure in a single data center. Due to business growth It plans to open more data center in the coming years. A network engineer is asked to recommend a network technology for data center interconnection that allows scalability and seamless VM mobility while providing maximum security and fault isolation between data center. Which technology must be used to meet these requirements?
- A. Trustsec
- B. UDLD
- C. Cloudsec
- D. OTV
Answer: D
NEW QUESTION # 141
A network engineer designs a Cisco Nexus data center network for a client-server farm using a pair of Nexus 9000 Series Switches in a vPC setup. Each server connects with two interfaces to both Nexus switches. The Nexus switches must always initiate the negotiation with the server.
Which feature should be used in this design to ensure traffic is forwarded from the server to the data center network?
- A. LACP mode active
- B. PAgP mode desirable
- C. PAgP mode auto
- D. LACP mode auto
Answer: A
NEW QUESTION # 142
......
What is the testing format for the Cisco 300-610 Exam
The passing score: 72%
Time Duration: 0 mins
Languages: English
Number of Questions: 0 questions
Exam Format: multiple choice
300-610 Sample with Accurate & Updated Questions: https://www.testkingpass.com/300-610-testking-dumps.html
300-610 Exam Info and Free Practice Test | TestkingPass: https://drive.google.com/open?id=1e-uWxspWy0VJ_bgyyzIevirrggrArla1