Latest Oracle 1Z0-1045-20 PDF and Dumps (2021) Free Exam Questions Answers
Pass Your Oracle Warehouse Management Cloud 1Z0-1045-20 Exam on Nov 01, 2021 with 72 Questions
Oracle 1Z0-1045-20 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
| Topic 12 |
|
| Topic 13 |
|
NEW QUESTION 12
Which two REST API actions are supported by Oracle WMS Cloud? (Choose two.)
- A. POST
- B. RECEIVE
- C. GET
- D. DELETE
- E. SEND
Answer: A,C
NEW QUESTION 13
You want to wave three orders. Two orders had the same route number in the order header, and the other order didn't have a route number. You want to make sure the orders are assigned to the same load.
What should you do or check?
- A. Change company parameter WAVE_ASSIGN_LOAD to One load per wave
- B. If they all have the same "Ship to Name" and "Ship to Address 1", they will be assigned to the same load.
- C. Change the Task selection criteria to be configured to assign by load.
- D. Add another route number to the third order. As long as they are waved together, they will be assigned to the same load.
Answer: A
NEW QUESTION 14
Your customer wants to use Advance Shipment Notification (ASN) created in WMS Cloud System for receiving without RF gun and expects ASN to be verified.
What are the two steps to complete the ASN receiving and verification transaction? (Choose two.)
- A. Create a Blind IB plate number and palletize after receiving
- B. Assign a dock door to IB shipment
- C. Verify the IB shipment
- D. Create a Blind IB plate number and cartonize before receiving
- E. Create an ASN from the IB license plate screen
Answer: A,B
NEW QUESTION 15
Your customer wants to receive an IB shipment and capture pallet weight at the time of receiving.
Which parameter must be set in the Receiving RF screen to meet this requirement?
- A. Set rch-sku-not-on-shmnt to "Promt for catch wt".
- B. Set Mode as Blind-ASN Receiving.
- C. Set Blind-License Plate Number-receive-mode as by SKU scan.
- D. Set Single-Sku-management as Assume Single SKU.
- E. Set Capture-catch-weight as "Prompt for catch wt".
Answer: B
NEW QUESTION 16
Which two data conditions on the Outbound Order will always result in unsuccessful cross-dock allocations in WMS Cloud? (Choose two.)
- A. The quantity of the item on the Outbound Order is less than the quantity of the item on the LPM being received.
- B. The item on the Outbound Order is a batch tracked item.
- C. The quantity of the item on the Outbound Order is greater than the quantity of the item on the LPN being received.
- D. The quantity of the item on the Outbound Order is exactly equal to the quantity of the item on the LPN being received.
- E. The item on the Outbound Order does not match the item on the LPN being received.
Answer: A,E
NEW QUESTION 17
Select four true statements about System Directed QC. (Choose four.)
- A. Once system directed QC is turned on, all receipts go through QC.
- B. The QC process required the use of Purchase Order.
- C. How many SKUs are flagged for QC depends on what is specified in the vendor QC Screen.
- D. Items are flagged based on the vendor that sent PO and ASN.
- E. For QC to happen, the vendor has to be configured in the system.
Answer: A,B,C,E
NEW QUESTION 18
You are performing the Split IB LPNs RF transaction and seeing an error message: Shipment Verification status mismatch.
Which three are valid? (Choose three.)
- A. This error message will disappear if the RF screen parameter split-uom is left bank.
- B. The from-IBLPN and the to-IBLPN might be received against two different ASNs respectively.
- C. The from-IBLPN and the to-IBLPN might be received against the same ASN.
- D. If the to-IBLPN is received via the Recv Shipment RF transaction, the from-IBLPN might be from the Create RF transaction.
- E. This error message will disappear if the RF screen parameter required-validations is set up as No Validation.
Answer: A,C,E
NEW QUESTION 19
You are monitoring the progress of the picking wave and notice that a rush order needs to be picked immediately.
Which two steps should you take to complete the Picking Tasks as soon as possible? (Choose two.)
- A. Select the tasks in the Tasks UI, select Assign user, and let the picker know that he/she is to select the tasks for immediate pick.
- B. Select the tasks and in the Tasks UI, select Change Task Priority to give the task a higher priority.
- C. Select the tasks in the Tasks UI, and confirm the pick in the UI.
- D. Select the tasks in the Tasks UI, select Cancel Task, and re-run the wave.
- E. Manually take the inventory from the location to the shipping area.
Answer: A,C
NEW QUESTION 20
Select two configurations required to fulfill a Cross Dock order. (Choose two.)
- A. Module Parameter should be enabled on the RF Receive Screen for receiving Cross Dock ASN
- B. Wave template should be configured to allocate Cross Dock Order
- C. IB Shipment Type should be defined for Cross Dock ASN
- D. The Cross Dock Outbound Order type should be defined
- E. The Replenishment template is required to replenish Cross Dock Order
Answer: C,E
NEW QUESTION 21
The following configuration is set for the Advance Shipment Notification type: 10% Under Receipt Warning,
10% Over Receipt Warning, and 20% Over Receipt error.
Which two statements match the condition set if the ASN Qty is 100? (Choose two.)
- A. When the Operator receives 89, the RF screen displays an Under Receipt warning message.
- B. When the Operator receives 101, the RF screen displays an Over receipt warning message.
- C. When the Operator receives 125 units, the RF screen displays an Over Receipt warning message.
- D. When the Operator receives 130 units, the RF screen displays an Over Receipt error message.
- E. When the Operator receives 110, the RF screen displays an Over Receipt warning message.
Answer: D,E
NEW QUESTION 22
Identify the export type that is not supported in an Express Report.
- A. PDF
- B. RTF
- C. Excel
- D. PowerPoint
- E. CSV
Answer: D
NEW QUESTION 23
Your client finds it easier to read reports without repeated values. The client shared an example report to demonstrate the way they want their columns to be displayed.
What action should you take to make your report look like the example report provided by client?
Report A:
- A. Select the Suppress Duplicate Values icon.
- B. Select the Hid Common Values icon.
- C. Select Chart Wizard, and delete repeated values.
- D. Select the Hide Repeated Values icon.
Answer: C
NEW QUESTION 24
Select three statements are true. (Choose three.)
- A. Appointments can be used (instead of IB loads) as a way of checking in Loads into the WMS Cloud for receiving.
- B. The matching value type and matching value must be specified when the appointment is created.
- C. Appointments cannot be used to track lead-time from the trailer's check-in time to the receipt of the first LPN into the system.
- D. Appointments are useful for tracking time discrepancies in various metrics such as planned and actual arrival time.
- E. The Duration as specified cannot be exceeded by the users.
Answer: A,B,D
NEW QUESTION 25
Item X has product life as 40 days and % Acceptable as 40%. You are doing receiving for your company via RF and today is Sep. 15th, 2017. The receiving transaction that you use to receive Item X has left the screen parameter allow-rem-exp-override blank, and has the screen parameter allow-inv-exp-override set to on.
Identify two valid facts. (Choose two.)
- A. Expiry date is the only date value that you can enter via receiving transactions, but it is optional based on the items configuration.
- B. When you communicate to the RF that the expiry date of Item X is Oct. 25th, 2017, the system will allow you to receive it.
- C. When you communicate to the RF that the expiry date of Item X is Oct. 10th, 2017, the system will allow you to receive it.
- D. When you communicate to the RF that the expiry date of Item X is Sep. 30th, 2017, the system will allow you to receive it.
- E. When you communicate to the RF that the expiry date of Item X is Oct.20th, 2017, and there's an existing inventory of Item X whose expiry date is Oct.4th, the system will allow to receive it.
Answer: A,D
NEW QUESTION 26
What configuration is needed to create Advance Shipment Notifications for a Transfer Order shipped between two facilities configured in the same WMS Cloud environment?
- A. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Source Facility.
- B. Set CREATE_ASN_FOR_EACH_PO to YES at Source and Destination Facility levels.
- C. Set CREATE_ASN_FOR_EACH_PO to YES at the Company level.
- D. The Facility parameter key AUTOLOAD_and_SHIP should be set to Yes.
- E. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Destination Facility.
Answer: E
NEW QUESTION 27
Identify two correct statements about the type of receiving supported by Oracle WMS Cloud. (Choose two.)
- A. Receive by load (RF-Text: Recv LPN Load) allows receiving multiple ASNs.
- B. Receive by ASN (RF-Text: Recv LPN Shipment) allows receiving multiple ASNs.
- C. Oracle WMS Cloud does not allow assigning multiple ASNs to a load.
- D. If the trailer contains multiple ASNs, IB Loads can be used to consolidate then into a single record.
Answer: B,D
NEW QUESTION 28
......
1Z0-1045-20 Dumps for Oracle Warehouse Management Cloud Certified Exam Questions & Answer: https://www.testkingpass.com/1Z0-1045-20-testking-dumps.html