Latest [Oct 07, 2021] CQE Exam with Accurate Quality Engineer Exam PDF Questions
Take a Leap Forward in Your Career by Earning ASQ 162 Questions
NEW QUESTION 92
Which of the following quantitative methods does NOT apply to the assessment of actual system/component reliability?
- A. Evaluation of laboratory test data.
- B. Statistical allocation of reliability goals.
- C. Analysis of results of reliability demonstration tests.
- D. Statistical analysis of field test and failure data.
Answer: B
NEW QUESTION 93
A typical use for the optical comparator would be to measure
- A. Surface finish.
- B. Contours.
- C. Depth of holes.
- D. Diameters of internal grooves.
Answer: B
NEW QUESTION 94
Corrective action requests are primarily
- A. Issued to correct supplier deficiencies.
- B. A result of nonconformances detected in the internal inspection process.
- C. Formal requests for corrective and preventive action.
- D. Generated to correct auditing deficiencies.
Answer: C
NEW QUESTION 95
What does a corrective action do to prevent an existing noncomformity, defect or undesirable situation from recurring?
- A. Takes action against it.
- B. Minimizes it.
- C. Takes repercussions against those responsible.
- D. Eliminates it.
Answer: D
NEW QUESTION 96
Which of the following quality system provisions is of the greatest concern when preparing an audit checklist for a vendor qualification system audit?
- A. Training level of inspectors.
- B. Calibration of test equipment.
- C. Drawing and print control.
- D. Makeup of the MRB
Answer: B
NEW QUESTION 97
What is the key ranking difference between the Deming philosophy and the Malcolm Baldrige award criteria?
- A. Deming prescribes "all or nothing" propositions but MBNQA ranks categories with different weights.
- B. The MBNQA has seven categories compared to Deming's 14 points.
- C. The MBNQA ranks "business results" and "customer focus", but Deming does not consider theseitems.
- D. There is no recognized rating system for the MBNQA.
Answer: A
NEW QUESTION 98
The use of 100% inspection normally means
- A. That selected characteristics have been evaluated against specified standards.
- B. That the final customers will not experience defective product.
- C. That the lowest over-all quality costs have been considered.
- D. That there will be an opportunity to rework any product deemed to be outside of specifications.
Answer: A
NEW QUESTION 99
Which of the following would be considered the WEAKEST reason to initiate an audit?
- A. To compare actual practice to a defined standard.
- B. Follow-up on corrective action.
- C. Verify that a quality system continues to meet requirements.
- D. Identify the root cause of a recent problem.
Answer: D
NEW QUESTION 100
The term "quality audit" can refer to the appraisal of the quality system of
. An entire plant or company.
. One product.
. One major quality activity.
- A. I andIIIonly
- B. I only
- C. IIandIIIonly
- D. I,IIandIII
Answer: D
NEW QUESTION 101
Which of the following is NOT considered a prevention cost?
- A. Writing operating procedures.
- B. Data acquisition and analysis.
- C. Training.
- D. Calibrating test equipment.
Answer: D
NEW QUESTION 102
You are requested by top management to establish an audit program of the quality systems in each branch plant of your firm. Which of the following schemes would you use in selecting the audit team to optimize continuity, direction, availability, and technology transfer?
- A. A full time audit staff.
- B. Hybrid audit staff (a proportion of answers a and b above).
- C. An outside consulting firm.
- D. All volunteer audit staff.
Answer: B
NEW QUESTION 103
The distribution of a characteristic is negatively skewed. The sampling distribution of the mean for large samples is:
- A. Lognormal.
- B. Negatively skewed.
- C. Positively skewed.
- D. Approximately normal.
Answer: D
NEW QUESTION 104
When planning quality control functions, which one of the following is MOST directly related to production of a quality product?
- A. Process control and process capability.
- B. Product audits.
- C. Dimensional tolerancing.
- D. Suitable blueprints.
Answer: A
NEW QUESTION 105
The expression below is which of the following?
- A. General term for the Poisson distribution.
- B. General term for the hypergeometric distribution.
- C. General term for the binomial distribution.
- D. General term for the Pascal distribution.
Answer: C
NEW QUESTION 106
The Shewhart or Deming cycle is often referred to as
- A. The cause and effect diagram.
- B. Plan-do-check-act.
- C. The affinity diagram.
- D. Problem solving flow chart.
Answer: B
Explanation:
Explanation
NEW QUESTION 107
Given the data below, what is the 90% confidence interval for the variance?
22, 23, 19, 17, 29, 25
- A. 16.87 - 56.52
- B. 4.21 - 99.07
- C. 8.27 - 79.88
- D. 15.32 - 28.66
Answer: C
NEW QUESTION 108
Compute the upper control limit for an s chart, based on a sample size of 10, if the process is in control with a mean of 40 and a sample standard deviation of 7.
- A. 11.7
- B. 0
- C. 13.3
- D. 15.7
Answer: A
NEW QUESTION 109
A "p" chart
- A. Plots the number of defects in a sample.
- B. Can be used for only one type of defect per chart.
- C. Plots variations in dimensions.
- D. Plots either the fraction or percent defective in order of time.
Answer: D
NEW QUESTION 110
Which of the following would be the MOST important considerations when establishing inspection points within a production operation?
. Inspection to prevent defects from entering the system.
. Inspection after all operations (both manual and automated).
. Inspection prior to a painting or masking operation.
- A. I,IIandIII
- B. I andIIIonly
- C. I only
- D. I andIIonly
Answer: B
NEW QUESTION 111
Which of the following statements is CORRECT?
- A. The better the regression estimate, the greater the likelihood that homoscedasticity exists with therespect to the predicted variable.
- B. The higher the correlation, the better the regression estimate.
- C. Regression estimates are better made with positive correlation than with negative correlation.
- D. The lower the correlation, the greater the likelihood that homoscedasticity exists with respect to thepredicted variable.
Answer: B
NEW QUESTION 112
......
Authentic Best resources for CQE Online Practice Exam: https://www.testkingpass.com/CQE-testking-dumps.html
Practice To CQE - TestkingPass Remarkable Practice On your Quality Engineer Exam Exam: https://drive.google.com/open?id=1kxUsMZ061IGBbI4iP8lPBfzddm3-0d4r