Latest [Feb 23, 2022] Cisco 700-905 Real Exam Dumps PDF
700-905 Practice Test Questions Updated 52 Questions
Cisco 700-905 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION 18
Which uses for the system drive in an HX node are valid? (Choose two.)
- A. Virtual machine store
- B. Migration
- C. Saving and restoring program state
- D. Garbage collection
- E. Write Cache
Answer: C,D
Explanation:
NEW QUESTION 19
How many DIMMs are supported per memory channel in the Cisco UCS M5 server?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 20
Which two features enable RAID cards striping as well as mirroring and parity1? (Choose two.)
- A. No load on the system resources, drives seem as one drive to the operating system
- B. Distributed drives across disparate systems can be in RAID together.
- C. Hot replacement of drives available, depending on configuration
- D. Integration with Cisco Intersight for a cloud-based storage management solution.
- E. On RAID card failure, the RAID onboard concurrent cache assists rebuild cache.
Answer: B,E
NEW QUESTION 21
HyperFlex virtual servers differ from regular servers in which two key areas? (Choose two.)
- A. No RAID is required to consolidate disks into a shared data platform.
- B. CVM: Virtual appliance, which performs reading/writing, caching, deduplication, and compression.
- C. NVMe: Regular servers do not support NVMe drives for high availability.
- D. SP: UCS Service Profiles are used to delineate MAC address pools from upstream networks.
- E. CCC: Cisco Cloud Center is used for multi-cloud integration and seamless deployment.
Answer: A,B
Explanation:
NEW QUESTION 22
What is the maximum size of an HXDP cluster running 3.5.1?
- A. 8 nodes
- B. 32 nodes
- C. 64 nodes
- D. 16 nodes
Answer: C
Explanation:
NEW QUESTION 23
Which two Cisco UCS Servers support converged nodes in HyperFlex Data Platform (HXDP)? (Choose two.)
- A. UCS C480
- B. HX240
- C. UCSB200
- D. UCS B480
- E. HX 220
Answer: B,E
NEW QUESTION 24
If a GPU card is Installed in HyperFlex nodes before a cluster is created, which action can be used to automatically build the service profile in UCS Manager?
- A. Check the GPU workflow during the cluster creation process
- B. Check Run UCS Manager Configuration during the cluster creation process
- C. Check the extended memory option during the cluster creation process
- D. Check the administrative workflow option during the cluster creation process
Answer: A
Explanation:
NEW QUESTION 25
What is the maximum size of an HXDP cluster running 3.5.1?
- A. 8 nodes
- B. 32 nodes
- C. 64 nodes
- D. 16 nodes
Answer: C
NEW QUESTION 26
Where is the VIC configuration for number type, identify, failover, settings, and bandwidth stored?
- A. in UCS Manager server profiles
- B. in VCenter virtual machine image
- C. in UCS Manager service profiles
- D. in non-volatile memory on the VIC
Answer: A
NEW QUESTION 27
Which statement about Standalone Cisco UCS Server Deployments is valid?
- A. They do not require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx) associated with the deployment
- B. They require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx) associated with the deployment
- C. They require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx) associated with the deployment
- D. They do not require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx) associated with the deployment
Answer: A
Explanation:
NEW QUESTION 28
When cabling a given HX node to the Fabric Interconnect which three actions are required? (Choose three.)
- A. Connect the node to the same port number on each of the two Fabric Interconnects.
- B. Connect server port L1 to Fabric Interconnect port L1.
- C. Connect server port L2 to Fabric Interconnect port L2
- D. Connect port 1 on the VIC to Fabric Interconnect A.
- E. Connect port 2 on the VIC to Interconnect B.
- F. Connect the node to different port numbers on each of the two Fabric Interconnects.
Answer: A,D,E
NEW QUESTION 29
If a GPU card is Installed in HyperFlex nodes before a cluster is created, which action can be used to
automatically build the service profile in UCS Manager?
- A. Check the GPU workflow during the cluster creation process
- B. Check Run UCS Manager Configuration during the cluster creation process
- C. Check the extended memory option during the cluster creation process
- D. Check the administrative workflow option during the cluster creation process
Answer: A
NEW QUESTION 30
The process of optimizing information is tightly tied to the writing process as it is performed inline as the
writing process is being performed The process of data optimization is performed with which two processes?
(Choose two)
- A. On read/Write. the distributed VAAI sends the write to the primary CVM for that block
- B. The primary CVM compresses the data, writes it to its cache drive and mirrors it
- C. On write, the local lOVisor sends the write to the primary CVM for that block
- D. ACK is sent to the CVM that the write is about to be initiated
- E. The secondary CVM compresses the data, reads it from its cache drive and mirrors it
Answer: A,D
NEW QUESTION 31
Refer to the exhibit.
Which VIC model supports two wire connectivity to each Fabric Interconnect?
- A. VIC 1457
- B. VIC 1227
- C. VIC 1557
- D. VIC 1387
Answer: B
NEW QUESTION 32
There are often disadvantages when using mixed hardware, and uniform systems are highly advised. What are three disadvantages of using validated yet mixed hardware? (Choose three.)
- A. Validated hardware does not mean smooth performance, which particularly applies to hardware that is seldom chosen for the hardware part of the "software only" solution.
- B. "Software only" solutions are inherently more secure, adhering to government regulations.
- C. "Hardware only" solutions require less latency for data aggregation.
- D. "Software only" HCI solutions often mean that HCI vendors do not have control over the hardware that the consumer is using. The lack of control over the hardware can result in hardware not being security-compliant (usually the case with white box solutions) or not being optimally configured for the given HCI solution.
- E. "Software only" solutions can result in a lack of simplicity for installation and maintenance. While setup and maintenance of an HCI solution might be simple you still need to configure and maintain the hardware part, which is not orchestrated by the HCI solution.
- F. Validated yet "mixed" hardware systems may be supported by the specific original equipment manufacturers but software vendors require a master level services agreement.
Answer: A,D,E
Explanation:
NEW QUESTION 33
When local writing or reading is performed, the lOVisor intercepts the read/write requests and forwards them to CVMs across the cluster This action allows non-local CVMs to be aware of the input/output requests so that they can perform the appropriate input/output action lOVisor provides which two additional functionalities? (Choose two.)
- A. enables asynchronous replication of data across individual HyperFlex nodes with sub-second re- convergence
- B. when an lOVisor fails, the CVM remains active and functional, which enables uninterrupted operation of the system by forwarding 10 to another available lOVisor In the HyperFlex cluster
- C. provides redundancy when local CVM fails, offloading data processing to another CVM in the cluster
- D. integration point for deployment of cloud-based SaaS offerings from eco-system partners
- E. intercepts local virtual machines' reads and writes and distributes them across the network eliminating hotspots
Answer: C,E
Explanation:
NEW QUESTION 34
Which two results are expected when you replace a node or expand a cluster? (Choose two.)
- A. vSphere DRS migrates the virtual machines to the new node to balance the load
- B. The cluster profile is updated and RAID takes care of rebalancing the load.
- C. Distributed pooled data is migrated off nodes to master data store.
- D. Affected node is marked as unhealthy and placed into standby mode
- E. On node replace, the self-healing must finish for the cluster to be healthy
Answer: C,E
NEW QUESTION 35
Which three functionalities are provided by VAAI? (Choose three.)
- A. VAAI uses RAID to consolidate disks into a shared data platform.
- B. Cisco HXDP creates a file system native snapshot which is registered in the vSphere.
- C. When a native snapshot is requested, the request is processed by the hypervisor.
- D. Instead of the snapshot being performed in hypervisor it is offloaded to Cisco HXDP.
- E. Missing pieces of data are re-created from the remaining nodes in service
- F. VAAI performs caching, deduplication: and compression of data.
Answer: A,E,F
NEW QUESTION 36
Which two processes does Disk Failure initiate? (Choose two)
- A. Distributed pooled data is migrated off nodes to master data store.
- B. The affected cluster is marked as unhealthy and placed into standby mode
- C. Self-healing mode is initiated and data replication factors applied.
- D. If the replication factor is sufficient for the failure, the system is marked as unhealthy but remains
operational - E. Performance is almost unaffected Sets 1-minute timer until self-healing starts.
Answer: C,E
NEW QUESTION 37
Which three additional management tools are included in HXDP to configure HyperFlex clusters?
(Choose three.)
- A. REST API
- B. UCS Manager
- C. Storage CLI
- D. Cisco IMC 13
- E. Data Center Network Manager
- F. HyperFlex Connect
Answer: A,C,F
Explanation:
NEW QUESTION 38
How much memory is reserved for the controller VM in the HX220c?
- A. 12 GB
- B. 48 GB
- C. 78 GB
- D. 24 GB
Answer: B
Explanation:
NEW QUESTION 39
What is the minimum amount of memory required for an HX node?
- A. 32 GB
- B. 128 GB
- C. 64 GB
- D. 192 GB
Answer: C
NEW QUESTION 40
Cisco HyperFlex AII-NVMe nodes are expected to be supported beginning in which HXDP version'?
- A. HXDP 4.0.1
- B. HXDP 3 5.2
- C. HXDP 4.0
- D. HXDP 3.5.1
Answer: C
Explanation:
NEW QUESTION 41
With which three components must every HyperFlex cluster be equipped with in regard to disks?
(Choose three.)
- A. there are no specific requirements
- B. same type of cache drives
- C. same number of capacity drives
- D. same type and size of capacity of drives
- E. NVMe drives
- F. SAS drives
Answer: B,C,D
Explanation:
NEW QUESTION 42
......
Cisco 700-905 Dumps - Secret To Pass in First Attempt: https://www.testkingpass.com/700-905-testking-dumps.html