[Jul-2023] Huawei H35-210_V2.5-ENU Exam Practice Test Questions - TestkingPass
Updated Certification Exam H35-210_V2.5-ENU Dumps - Practice Test Questions
In order to take the Huawei H35-210_V2.5-ENU (HCIA-Access V2.5) Exam, candidates must have a basic understanding of network technologies and protocols, as well as experience working with Huawei products and solutions. H35-210_V2.5-ENU exam consists of multiple-choice questions, and candidates have 90 minutes to complete it. A passing score on the exam indicates that the candidate has demonstrated a high level of proficiency in network access technologies and is qualified to work with Huawei products and solutions.
Huawei H35-210_V2.5-ENU exam is an essential certification exam for IT professionals who want to validate their skills and knowledge in HCIA-Access V2.5. H35-210_V2.5-ENU exam covers a wide range of topics, and the candidates need to have a good understanding of access network technologies, access network protocols, and access network security. HCIA-Access V2.5 certification is recognized worldwide and can enhance the career prospects of the IT professionals. The candidates can prepare for the exam through self-study, training courses, and practice exams.
Huawei H35-210_V2.5-ENU is a certification exam that tests the knowledge and skills of individuals in the field of network access technologies. H35-210_V2.5-ENU exam is designed to assess the candidate's ability to plan, design, deploy, maintain, and troubleshoot network access technologies. Passing H35-210_V2.5-ENU exam is an essential step for professionals who want to join the Huawei Certified ICT Associate - Access certification program.
NEW QUESTION # 137
Is the following description correct? The traffic-table on the OLT can not only set traffic speed limit parameters, but also support setting priority policies.
- A. True
- B. False
Answer: A
NEW QUESTION # 138
Is the following description correct? There are no restrictions on the multicast program groups that MA5600T can configure.
- A. False
- B. True
Answer: A
NEW QUESTION # 139
Which of the following statements about the PPP protocol is correct? (Multiple choice)
- A. PPP link control protocol LCP is not only used to establish, tear down and monitor PP data links, but also mainly negotiate link layer parameters, such as MRU and authentication mode.
- B. Support point-to-multipoint connection
- C. PPP protocol runs at the network layer
- D. The PPP protocol provides a standard way to transmit packets of various network layer protocols over point-to-point links.
Answer: A,D
NEW QUESTION # 140
Which of the following information is the information that Solaris environment variables can provide?
- A. Default route
- B. Path
- C. Shell used
- D. Default editor
Answer: B,C,D
NEW QUESTION # 141
Among the access technologies of the access network, which of the following access methods can provide the largest access bandwidth?
- A. VDSL
- B. GPON
- C. ADSL
- D. ADSL 2+
Answer: B
NEW QUESTION # 142
The DBA can complete the dynamic allocation of upstream bandwidth in microsecond or millisecond time intervals.
- A. FALSE
- B. TRUE
Answer: B
NEW QUESTION # 143
What factors affect the actual line rate of ADSL business?
- A. Line length
- B. Wire diameter
- C. Interference
- D. Wiring situation
Answer: A,B,C,D
NEW QUESTION # 144
During the configuration of the EPON PPPoE service, what templates need to be configured to increase the MDU?
- A. System parameter template
- B. DBA template
- C. Route template
- D. Traffic template
Answer: B,C
NEW QUESTION # 145
The VLAN switching plan of the Internet service in a project adopts the translate method, and the C-VLAN ID and S-VLAN ID need to be consistent during planning.
- A. TRUE
- B. FALSE
Answer: B
NEW QUESTION # 146
According to the IEEE 802.1Q standard, where is the VLAN identification field in the Ethernet frame?
- A. Not fixed
- B. Between the source MAC address and the destination MAC address
- C. After the source MAC address and destination MAC address
- D. Before source MAC address and destination MAC address
Answer: C
NEW QUESTION # 147
Is the following description correct? Before the upgrade operation, you need to stop the automatic saving function of the system through a command to avoid conflict between the upgrade operation and the automatic saving operation, which may cause the upgrade to fail.
- A. True
- B. False
Answer: A
NEW QUESTION # 148
Which interfaces in the UA5000 IPMD single board are used to communicate with PVMD and implement VOIP services?
- A. 0 and 2;
- B. 0 and 1;
- C. 2 and 3;
- D. 6 and 7
Answer: D
NEW QUESTION # 149
Which of the following reasons may cause the voice user to pick up the phone without dial tone?
- A. No voice file is loaded
- B. External line failure
- C. Device port hardware failure
- D. Data error
Answer: A,B,C,D
NEW QUESTION # 150
IPA part of the fields in the message are specifically used to describe the life cycle of the message, namely TTL Value, what is its maximum value?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 151
Which of the following statements about the configuration of static routes is correct ?
- A. The next hop is required
- B. The mask parameter is optional
- C. The mask parameter is required
- D. Priority is required
Answer: C
NEW QUESTION # 152
In the H.248 protocol, how to apply for gateway registration?
- A. Send MOD_REQ from MG to MGC
- B. Send SVC_CHG_REQ from MGC to MG
- C. Send SVC_CHG_REQ from MG to MGC
- D. Send MOD_REQ from MGC to MG
Answer: C
NEW QUESTION # 153
When adding ont-lineprofile on the OLT, which need to configure? (Multiple choice)
- A. Configure the vlan of the ONTETH port
- B. Add DBA template
- C. Bind tcont and DBA template
- D. Add gemport and configure gemport mapping relationship
Answer: B,C,D
NEW QUESTION # 154
In the GPON system, the upstream uses DBA technology to make full use of bandwidth resources, where the DBA template of TYPE 4 represents?
- A. Guaranteed bandwidth
- B. Maximum bandwidth
- C. Guaranteed bandwidth + maximum bandwidth
- D. Fixed bandwidth
Answer: B
NEW QUESTION # 155
What is the allocation method of terminal identifiers stipulated in the H248 protocol?
- A. Assigned by MGC
- B. MG allocation when calling, MGC allocation when called
- C. MG allocation when the terminal is the calling party, and MGC allocation when it is the called party
- D. Assigned by MG
Answer: D
NEW QUESTION # 156
Is the following description correct? The process of voice fault location can generally be divided into: troubleshooting the external device fault, locating the fault to the specific device, and locating the fault to the board.
- A. True
- B. False
Answer: A
NEW QUESTION # 157
In the GPON network, which of the following statements is incorrect?
- A. Each GEM Port is identified by a unique Port-ID. The Port-ID ranges from 0 to 4095 and is globally assigned by the OLT. That is, each ONU/ONT under the OLT cannot use GEMs with repeated Port-IDs. Port.
- B. Each GPON port supports up to 32 ONU/ONT
- C. GEM Port identifies the service virtual channel between the OLT and ONU/ONT, that is, the channel that carries the service flow, similar to the VPI/VCI identification in the ATM virtual connection.
- D. Each T-CONT is composed of one or more GEM Ports, and each GEM Port carries a service flow. A T-CONT can carry data streams of one or more types of services.
Answer: B
NEW QUESTION # 158
In the template mode of MA5680T, where is the configuration of tcont and gemport integrated?
- A. dba-profile
- B. ont-profile
- C. ont-lineprofile
- D. ont-srvprofile
Answer: C
NEW QUESTION # 159
When you need to maintain and manage the MA5600T/MA5603T equipment locally, you can log in to the system through the local serial port .
Which interface is the RS-232 serial cable RJ-45 network port connector connected to?
- A. The network port of the maintenance PC
- B. "CON" port on the main control board
- C. "ESC" port on the main control board
- D. "ETH" port on the main control board
Answer: B
NEW QUESTION # 160
......
Updated Verified H35-210_V2.5-ENU dumps Q&As - Pass Guarantee or Full Refund: https://www.testkingpass.com/H35-210_V2.5-ENU-testking-dumps.html
H35-210_V2.5-ENU PDF Questions and Testing Engine With 373 Questions: https://drive.google.com/open?id=1LtzUgRcY7OLd3YoK3ccg6Ts095PtezeZ