HPE6-A66 Dumps PDF New [2021] Ultimate Study Guide [{qanumstr}]
HPE6-A66 Exam Dumps PDF Updated Dump from TestkingPass Guaranteed Success
Understanding functional and technical aspects of Gather and analyze data, and document customer requirements
The following will be asked from you in the HP HPE6-A66 exam dumps pdf:
- Given an outline of a customer’s needsfor a simple campus environment determine the information required to create a solution
NEW QUESTION 11
Refer to the exhibit.
When planning the use of Cat7 cabling for a SmartRate connection between an ArubaOS AP and an ArubaOS switch, which sections should be considered when calculating distance?
- A. A + B
- B. A + B + C
- C. A + B + C + D
- D. A + C
Answer: C
NEW QUESTION 12
A company has a warehouse that requires ruggedized APs to provide wireless access The APs need to support these characteristics:
* 2 or more spatial streams
* 802.11 ac and 802.11 n support
Cat 7 Ethernet cabling will be used to connect the APs to POE+ capable switches Link aggregation should be employed between the APs and the Ethernet switches. Which would be the most cost-effective solution that would meet the company's requirements?
- A. AP 318 with external omnidirectional antennas
- B. AP 375 with external omnidirectional antennas
- C. AP 510 with external omnidirectional antennas and plastic AP cover
- D. AP 365 with integrated omnidirectional antennas
Answer: A
NEW QUESTION 13
A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual controller for remote access via a DMZ. A Mobility Master (MM) is used for centralized license and controller management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000 employees. There are 30 branch offices that will use RAPs to connect to the DMZ controller. A peak of 100 users concurrently using the VIA client will also connect to the DMZ controller.
How many Aruba LIC-VIA licenses does the company need to purchase for this solution?
- A. 0
- B. 1
- C. 1,030
- D. 2
Answer: C
NEW QUESTION 14
A company has two buildings on a campus that are approximately 700 feet (214 meters) apart with a clear line of site. No fiber exists between the buildings; however, there is a need for connecting the networks in the buildings together. The connection between the two buildings will need to support peak rates over 1 Gbps.
Which solution should the company choose that will meet their requirements as well as being cost-effective?
- A. Two outdoor AP 510s
- B. Multi-mode fiber between campus switches
- C. Two outdoor AP 367s
- D. Two outdoor AP 387s
Answer: C
NEW QUESTION 15
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?
- A. 10MHZ
- B. 60 MHZ
- C. 20 MHz
- D. 40 MHZ
Answer: B
NEW QUESTION 16
What is the main key for a network design to ensure users have a good experience running their applications'?
- A. Provision adequate bandwidth.
- B. Determine the number of users per location.
- C. Implement appropriate security controls
- D. Provide appropriate AP density.
Answer: D
NEW QUESTION 17
Which IRIS option will automatically create a project with a blank preconfigured Site-1 ?
- A. New Campus
- B. New Site
- C. New Express Mode
- D. New Project
Answer: A
NEW QUESTION 18
A customer is purchasing Aruba 555 APs for a new wireless network. The APs will be pre-staged as campus APs (CAPs) and be managed by a controller solution During the pre-staging process, console access to the APs might be necessary Which console connection cable should the customer purchase for the 555 APs?
- A. RJ-45
- B. USB-A
- C. RS-232
- D. Micro-B USB
Answer: D
NEW QUESTION 19
A company is installing Internet of Things (loT) devices to support a smart and energy-efficient environment for a building, including loT devices for heating and air conditioning, lights, and window shades. loT devices of these types are typically classified as which category of devices?
- A. Highly mobile devices (HMD)
- B. Somewhat mobile devices (SMD)
- C. Stationary devices
- D. Nomadic devices
Answer: D
NEW QUESTION 20
A network architect is given the task to design a new network solution for NewStellar Company, Inc. NewSteiiar has a main corporate campus in a business park with two adjacent buildings. The network architect has given one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. Each floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet {870 square meters).
Because of security concerns, video cameras will be installed throughout the facility. There are 16 of these per floor, 8 per wiring closet. The cameras are non-WiFi capable and require POE 802.3af-capable switch ports from which to draw power.
A wireless capacity design is required. Assuming that wireless coverage is required across the Building 1, Floor 2, including the central area, and that half the required APs will connect to each wiring closet, approximately how many POE+ ports will be required per wiring closet for all devices that have POE or POE+ needs?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 21
NewRocket requires a wireless capacity design 30 Aruba 510 APs will be connected to each wiring closet using SmartRate connections. Wireless coverage needs to be provided even if a POE+ switch loses power Because of security concerns, wired video cameras were recently installed throughout the facility. There are 12 of these per floor. 6 per wiring closet. The cameras are 802.11n WiFi capable and have power injectors from which to draw power.
Based on the POE+ needs of the mentioned devices, which solution would meet the POE+ requirements while still providing a redundant and cost-effective Wi-Fi solution for the devices that require POE+ for Building 1, Floor 2?
- A. Two 2930M 24-port POE+ switches
- B. One 3810M 40G 8 HPE Smart Rate switch
- C. One 2930M 48-port POE+ switch
- D. Two 2930F 24-port POE+ switches
Answer: C
NEW QUESTION 22
A customer requires Aruba switches that support Smart Rate ports to connect to Aruba APs Which switching product should the customer purchase that will provide 24 Smart Rate ports per access layer switch'?
- A. Aruba 2930M
- B. Aruba 2540
- C. Aruba 2930F
- D. OfficeConnect 1950
Answer: A
NEW QUESTION 23
A network architect is replacing an old wireless implementation based on 802.11 a with a new wireless solution. The company has a lot of money invested in legacy wireless barcode scanners and will not be replacing them. However, the bandwidth that the company expects each AP to have less than 700 Mbps in bandwidth, and this is not expected to change in the future.
Which wireless solution would best meet this company's needs and be the most cost-effective?
- A. 802.11ax
- B. 802.11g
- C. 802.11n
- D. 802.11ac
Answer: A
NEW QUESTION 24
A network architect is redesigning a wireless network. The architect begins by analyzing the number of spatial streams supported by APs of various vendors as well as the wireless devices currently in the network, if the company wants to ensure that new wireless design, including user wireless devices, support Multi-User MIMO (MU-MIMO). which standard or standards must the wireless products support?
- A. Only 802.11ax,802.1lac, and 802.l1n
- B. Only 802.11ax,802.11ac, 802.11n, and 802.11a
- C. Only 802.11ax and 8011.ac
- D. Only 802.11ax
Answer: A
NEW QUESTION 25
A customer requires a campus core virtualization solution that supports a dual control and management planes, as well as active-active forwarding paths. Which solution would meet the customer's requirements?
- A. VSX
- B. Backplane stacking
- C. VSF
- D. Mesh stacking
Answer: B
NEW QUESTION 26
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- A. implementing adequate security measures to ensure PCI compliance
- B. determining the RF channel bandwidth consumed per Barcode scanner
- C. roaming between APs
- D. providing consistent performance on all available channels
- E. encountering RF interference by devices
Answer: A,D
NEW QUESTION 27
A customer placed an order for an ArubaOS 5406R switch and plans to rack mount it in a wiring closet. The dimensions of the switch are 17.5 inches wide (44.45 cm), 6.9 inches high (17.5 cm), and 17.75 inches deep (45.1 cm). How many rack units should a customer plan for this switch?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 28
A network architect will be using VisualRF to determine the appropriate wireless coverage for a new wireless design. Seamless, uninterrupted roaming is necessary for this design, since voice will need to be supported. Given these requirements, which information should be used in VisualRF to plan a cost effective solution that meets these requirements?
- A. Minimum -80db, 1 AP per 1,000 square feet, very high-density design
- B. Minimum -70db, 1 AP per 2,500 square feet, capacity design
- C. Minimum -70db. 1 AP per 5,000 square feet, high density design
- D. Minimum -65db, 1 AP per 2,500 square feet, high density design
Answer: D
NEW QUESTION 29
A network architect needs to design a new wireless solution for a small company The architect estimates that about 150 APs will be required to implement a capacity design. Roaming support is required. Also, the design requires meshing to connect some of the APs to the network.
The customer requires that client state synchronization be provided for real-time failover.
Which solution would most cost-effectively meet these requirements?
- A. lAPs in a cluster
- B. Two 7205 mobility controller and campus APs in a cluster
- C. FRAPs in a cluster
- D. Two 7030 mobility controller and campus APs in a cluster
Answer: C
NEW QUESTION 30
A high-end theater venue will be implementing an Aruba wireless solution using ceiling- and wall-mounted APs. The venue wants to ensure the the APs blend into the ceiling and wall environments. What solution should the customer use to ensure that wireless coverage is not hampered?
- A. Place the APs above the ceiling and behind the walls
- B. Order Aruba AP covers for the APs
- C. Place a strip of tape over the LEDs
- D. Paint the APs to match the ceilings or walls
Answer: A
NEW QUESTION 31
A network designer is documenting the number of physical sites for a customer that is within the scope of a redesign project. When determining the network purpose at each site, on what should the designer focus at each site? (Select two.)
- A. square footage
- B. number of buildings
- C. ceiling height
- D. number of users
- E. types of users and their devices
Answer: A,C
NEW QUESTION 32
A customer has a need to track traffic patterns and anomalies on a pair of ArubaOS-CX 8400 series switches. Which technology will the customer need to deploy for these switches?
- A. Mobility First
- B. Network Analysis Engine
- C. NetEdit
- D. 2 CiearPass
Answer: C
NEW QUESTION 33
A network architect imports a floorplan defined in a PNG file format What is the function of the measurement tool in Aruba's VisualRF?
- A. Define the appropriate dimensions of a Floorplan and Building View
- B. Define the appropriate dimensions of each room in a Floorplan View
- C. Define the appropriate dimensions of a Floorplan View
- D. Define the appropriate dimensions of each object in a Floorplan View
Answer: D
NEW QUESTION 34
A company needs an upgrade of its access layer switches. The solution requires that devices connected to the access layer by authenticated and their traffic processed by the firewall features of the Aruba Mobility Controllers. Which solution should the company implement?
- A. PAPI mobility
- B. iPsec tunneling
- C. Dynamic segmentation
- D. GRE tunneling
Answer: B
NEW QUESTION 35
......
Certification Completion
Three to five days after you complete all requirements, you receive an email notification. Then your status in The Learning Center becomes âacquiredâ.
If you renewed this certification through a recertification path, you will also recertify any lower level certifications you achieved within the same domain. Example: Renewal of ACMX will renew ACMP and ACMA. All renewed certifications from the one renewal path will have the same new expiration date.
If you renewed this certification by completing the Edge certification or the Edge recertification path at any level (Associate/Professional/Expert), this will renew all certifications you achieved at that same level and any lower levels you have achieved. Example: ACEP renews ACMP, ACSP, ACCP, ACDP etc. and any Associate level you already achieved. All renewed certifications from the Edge certification or recertification path will have the same new expiration date.
Pass Your HP Exam with HPE6-A66 Exam Dumps: https://www.testkingpass.com/HPE6-A66-testking-dumps.html
HPE6-A66 Exam Dumps - HP Practice Test Questions: https://drive.google.com/open?id=1YxZmmFe6_4_AoC3POOLXd9xsnY8wlf_K