Guaranteed Success in NSE 7 Network Security Architect NSE7_EFW-6.4 Exam Dumps
Fortinet NSE7_EFW-6.4 Daily Practice Exam New 2023 Updated 124 Questions
The Fortinet NSE7_EFW-6.4 certification exam is a comprehensive assessment of a professional's knowledge and expertise in enterprise firewall technologies. This certification validates the candidate's ability to deploy, configure, and manage Fortinet enterprise firewalls effectively. The certification is a valuable asset for security professionals who want to advance their careers and demonstrate their expertise in network security.
The Fortinet NSE7_EFW-6.4 Certification Exam covers a wide range of topics related to enterprise firewall technology, including network security design, implementation, and management. The exam also covers topics such as network security protocols, security policies, and security infrastructure. This certification is an excellent way for professionals to enhance their skills and knowledge in the field of network security.
NEW QUESTION # 27
Refer to the exhibit, which contains a TCL script configuration on FortiManager.
An administrator has configured the TCL script onFortiManager, but failed to apply any changes to the managed device after being executed.
Why did the TCL script fail to make any changes to the managed device?
- A. The TCLscript must start with #include <>.
- B. Incomplete commands are ignored in TCL scripts.
- C. Changes in an interface configuration can only be done by CLI script.
- D. The TCL command run_cmd has not been created.
Answer: D
NEW QUESTION # 28
A FortiGate has two default routes:
All Internet traffic is currently using port1. The exhibit shows partial information for one sample session of Internet traffic from an internal user:
What would happen with the traffic matching the above session if the priority on the first default route (IDd1) were changed from 5 to 20?
- A. Session would remain in the session table and its traffic would start using port2 as the outgoing interface.
- B. Session would be deleted, so the client would need to start a new session.
- C. Session would remain in the session table and its traffic would keep using port1 as the outgoing interface.
- D. Session would remain in the session table and its traffic would be shared between port1 and port2.
Answer: C
NEW QUESTION # 29
Refer to the exhibit, which contains a TCL script configuration on FortiManager.
An administrator has configured the TCL script on FortiManager, but the TCL script failed to apply any changes to the managed device after being run.
Why did the TCL script fail to make any changes to the managed device?
- A. Changes to an interface configuration can be made only by a CLI script.
- B. Incomplete commands are ignored in TCL scripts.
- C. The TCL command run_cmd has not been created.
- D. The TCL script must start with tinclude <>.
Answer: C
NEW QUESTION # 30
View the exhibit, which contains the partial output of an IKE real-time debug, and then answer the question below.
Why didn't the tunnel come up?
- A. The pre-shared keys do not match.
- B. The remote gateway's phase 2configuration does not match the local gateway's phase 2 configuration.
- C. The remote gateway's phase 1 configuration does not match the local gateway's phase 1 configuration.
- D. The remote gateway is using aggressive mode and the local gateway is configured to use man mode.
Answer: C
NEW QUESTION # 31
Examine the output of the 'get router info bgp summary' command shown in the exhibit; then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. Local BGP peer has not received an OpenConfirm from 10.200.3.1.
- B. The local BGP peer has received a total of 3 BGP prefixes.
- C. BGP peer 10.200.3.1 has never beendown since the BGP counters were cleared.
- D. BGP state of the peer 10.125.0.60 is Established.
Answer: A,D
NEW QUESTION # 32
Examine the output from the BGP real time debugshown in the exhibit, then the answer the question below:
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. BGP peers have successfully interchangedOpenandKeepalivemessages.
- B. The state of the remote BGP peer isOpenConfirm.
- C. Local BGP peer received a prefix fora default route.
- D. The state of the remote BGP peer will go toConnectafter it confirms the received prefixes.
Answer: A,C
NEW QUESTION # 33
Refer to exhibit, which contains the output of a BGP debug command.
Which statement explains why the state of the 10.200.3.1 peer is Connect?
- A. The local router has received the BGP prefixes from the remote peer.
- B. The local router is receiving the BGP keepalives from the peer, but it has not received a BGP prefix yet.
- C. The local router is receiving BGP keepalives from theremote peer, but the local peer has not received the OpenConfirm yet.
- D. The TCP session to 10.200.3.1 has not completed the 3-way handshake.
Answer: D
Explanation:
Explanation
BGP neighbor states and how they change:* Idle: Initial state* Connect: Waiting for a successful three-way TCP connection* Active: Unable to establish the TCP session* OpenSent: Waiting for an OPEN message from the peer* OpenConfirm: Waiting for the keepalive message from the peer* Established: Peers have successfully exchanged OPEN and keepalive messages
NEW QUESTION # 34
View the exhibit, which contains the output of diagnose sys session list, and then answer the question below.
If the HA ID for the primary unit is zero (0), which statement is correct regarding the output?
- A. This session is synced with the slave unit.
- B. This session is for HA heartbeat traffic.
- C. This session cannot be synced with the slave unit.
- D. The inspection of this session has been offloaded to the slave unit.
Answer: A
NEW QUESTION # 35
Refer to the exhibit, which contains the partial output of a diagnose command.
Based on the output, which two statements are correct? (Choose two.)
- A. DPD is disabled.
- B. The remote gateway IP is 10.200.4.1.
- C. Quick mode selectors are disabled.
- D. Anti-replay is enabled
Answer: B,D
NEW QUESTION # 36
Refer to the exhibit, which contains the partial output of a diagnose command.
Based on the output, which two statements arecorrect? (Choose two.)
- A. Remote gateway IP is 10.200.4.1.
- B. Anti-replay is enabled.
- C. DPD is disabled.
- D. Quick mode selectors are disabled.
Answer: A,B
NEW QUESTION # 37
A FortiGate is rebooting unexpectedly without any apparent reason. What troubleshooting tools could an administrator use to get more information about the problem? (Choose two.)
- A. Firewall monitor.
- B. Logs.
- C. Crashlogs.
- D. Policy monitor.
Answer: B,C
NEW QUESTION # 38
What global configuration setting changes the behavior for content-inspected traffic while FortiGate is in system conserve mode?
- A. mem-failopen
- B. ips-failopen
- C. utm-failopen
- D. av-failopen
Answer: D
Explanation:
Explanation
https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-security-profiles-54/Other_Profile_Consideration
NEW QUESTION # 39
Exhibits:
Refer to the exhibits, which contain the network topology and BGP configuration for a hub.
An administrator is trying to configure ADVPN with a hub-spoke VPN setup using iBGP. All the VPNs are up and connected to the hub. The hub is receiving route information from both spokes over iBGP; however, the spokes are not receiving route information from each other.
What change must the administrator make to the hub BGP configuration so that the routes learned by one spoke are forwarded to the other spokes?
- A. Make the configuration of remote-as different from the configuration of local-as.
- B. Configure an individual neighbor and remove neighbor-range configuration.
- C. Change the router id to 10.1.0.254.
- D. Configure the hub as a route reflector client.
Answer: D
NEW QUESTION # 40
Viewthe exhibit, which contains the output of a real-time debug, and then answer the question below.
Which of the following statements is true regarding this output? (Choose two.)
- A. FortiGate found the requested URL in its local cache.
- B. The requested URL belongs to category ID 52.
- C. This web request was inspected using the root web filter profile.
- D. The web request was allowed by FortiGate.
Answer: A,B
NEW QUESTION # 41
An administrator has decreased all the TCP session timers to optimize the FortiGate memory usage. However, after the changes, one network application started to have problems. During the troubleshooting, the administrator noticed that the FortiGate deletes the sessions after the clients send the SYN packets, and before the arrival of the SYN/ACKs. When the SYN/ACK packets arrive to the FortiGate, the unit has already deleted the respective sessions. Which TCP session timer must be increased to fix this problem?
- A. TCP half open.
- B. TCP time wait.
- C. TCP session time to live.
- D. TCP half close.
Answer: A
Explanation:
http://docs-legacy.fortinet.com/fos40hlp/43prev/wwhelp/wwhimpl/common/html/wwhelp.htm?context=fgt&file=CLI_get_Commands.58.25.html
The tcp-halfopen-timer controls for how long, after a SYN packet, a session without SYN/ACK remains in the table.
The tcp-halfclose-timer controls for how long, after a FIN packet, a session without FIN/ACK remains in the table.
The tcp-timewait-timer controls for how long, after a FIN/ACK packet, a session remains in the table. A closed session remains in the session table for a few seconds more to allow any out-of-sequence packet.
NEW QUESTION # 42
View the exhibit, which contains the output of a debug command, and then answer the question below.
What statement is correct about this FortiGate?
- A. It is currently in FD conserve mode.
- B. It is currently in kernel conserve mode because of high memory usage.
- C. It is currently in system conserve mode because of high memory usage.
- D. It iscurrently in system conserve mode because of high CPU usage.
Answer: C
NEW QUESTION # 43
An administrator cannot connect to the GIU of a FortiGate unit with the IP address 10.0.1.254. The administrator runs thedebug flow while attempting the connection using HTTP. The output of the debug flow is shown in the exhibit:
Based on the error displayed by the debug flow, which are valid reasons for this problem? (Choose two.)
- A. HTTP administrative access is configured with a port number different than 80.
- B. HTTP administrative access is disabled in the FortiGate interface with the IP address 10.0.1.254.
- C. The packet is denied because of reverse path forwarding check.
- D. Redirection of HTTP to HTTPS administrative access is disabled.
Answer: A,B
NEW QUESTION # 44
......
Test Engine to Practice NSE7_EFW-6.4 Test Questions: https://www.testkingpass.com/NSE7_EFW-6.4-testking-dumps.html
Use Valid NSE7_EFW-6.4 Exam - Actual Exam Question & Answer: https://drive.google.com/open?id=1Ubsm8HnZt_HfBcRDpGimX1oQeINgcQkA