Exam Questions Answers Braindumps 350-501 Exam Dumps PDF Questions
Download Free Cisco 350-501 Real Exam Questions
NEW QUESTION 145
Which protocol is used for communication between the PCE and PCC?
- A. PCEP
- B. ICMP
- C. CEF
- D. POP
Answer: A
NEW QUESTION 146
Refer to the exhibit.
An engineer is updating this network to meet these conditions:
* Area 10 will receive inter-area routes and support mutual redistribution of external routes with the extranet.
* The ::/0 route is prohibited in Area 10.
* Area 11 will receive only the ::/0 route from the ABR.
* External route redistribution is not supported in Area 11.
* The ABR in Area 11 will advertise no interarea routes.
Which two configurations must be performed to meet the requirements? (Choose two.)
- A. Configure area 11 as stub no-summary on R7 and as stub on XR31.
- B. Configure area 10 as nssa on R9 and XR32.
- C. Configure area 11 as nssa no-summary on R7 and as nssa on XR31.
- D. Configure area 11 as nssa default-information-originate on R7 and as nssa on XR31.
- E. Configure area 10 as stub on R9 and XR32.
Answer: A,D
NEW QUESTION 147
BGP has been implemented on an IOS XR router. Which configuration sends BGP IPv4 labels to build inter- domain LSPs?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
Section: Services
NEW QUESTION 148
Which two uses of the YANG data modeling language are true? (Choose two)
- A. It can be used to shape slats data of network elements
- B. It can be used to model the configuration used by NETCONF operations
- C. It can be used to access a device by HTTP
- D. It can be used to replace RESTCONF as a mechanism to install and manipulate configuration
- E. It can be used to replace the OSI model for troubleshooting
Answer: A,B
NEW QUESTION 149
Which additional feature does MPLS DiffServ tunneling support?
- A. matching EXP and DSCP values
- B. interaction between MPLS and IGP
- C. using GRE tunnels to hide markings
- D. PHB layer management
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/mp_te_diffserv/configuration/15-mt/mp-te-diffserv-15-mt-book/mp-diffserv-tun-mode.html
NEW QUESTION 150
Refer to the exhibit.
An engineer is preparing to implement data plane security configuration. What is the effect of this configuration?
- A. All traffic dropped.
- B. Router 1 and Router 2 advertise the route to 1920 2.0 24 to all BGP peers.
- C. Router 1 drops all traffic with a local-preference set to 150.
- D. All traffic to 192.1W1.024 is dropped.
Answer: D
NEW QUESTION 151
Refer to the exhibit.
Which show command should be implemented to display per-interface statistics about uRPF drops and suppressed drops?
- A. show ip traffic
- B. showip interface
- C. show ip interface brief
- D. show cef interface
Answer: B
NEW QUESTION 152
Which BGP attribute i5 used first when determining the best path?
- A. AS path
- B. local preference
- C. weight
- D. origin
Answer: C
NEW QUESTION 153
Refer to the exhibit:
You are configuring an administrative domain implement so that devices can dynamically learn the RP?
- A. Auto-RP
- B. SSM
- C. BID1R-PIM
- D. BSR
Answer: D
NEW QUESTION 154
Refer to the exhibit:
Export statistics received do not include the BGP next hop.
Which statement about the NetFlow export statistics is true?
- A. Only the origin AS of the source router will be included in the export statistics.
- B. To include the BGP next hop in the export statistics, those keywords must be included with the version 9 entry.
- C. The origin AS and the peer-as will be included in the export statistics.
- D. Loopback 0 must be participating in BGP for it to be included in the export statistics.
Answer: B
NEW QUESTION 155
Refer to the exhibit.
A network engineer is implementing a standard customer route-policy on router ASBR1 with these requirements:
* it must accept only customer-assigned prefixes.
* It must preserve customer-advertised BGP communities.
* it must set the local-preference to no for all prefixes.
* it must attach the ORIGINATION-PE and LOCAL-CITY communities to an accepted prefixes.
Which route policy must the engineer implement on ASBR1 to satisfy the requirements?
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: D
NEW QUESTION 156
Refer to the exhibit. Which show command should be implemented to display per-interface statistics about uRPF drops and suppressed drops?
- A. show ip traffic
- B. show ip interface brief
- C. show ip interface
- D. show cef interface
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_data_urpf/configuration/xe-3s/sec-data- urpf-xe-3s-book/cfg-unicast-rpf.html
NEW QUESTION 157
A network engineer is deploying VRF on ASBR router R1. The interface must have connectivity over an MPLS VPN Inter-AS Option AB network. Which configuration must the engineer apply on the router to accomplish this task?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
Section: Networking
NEW QUESTION 158
Refer to the exhibit. Routers P4 and P5 receive the 0.0.0.0/0 route from the ISP via eBGP peering. P4 is the primary Internet gateway router, and P5 is its backup. P5 is already advertising a default route into the OSPF domain. Which configuration must be applied to P4 so that it advertises a default route into OSPF and becomes the primary Internet gateway for the network?
- A. configure terminal
router ospfv3 100
address-family ipv4 unicast
redistribute bgp 65500 metric 40 metric-type 1
end - B. configure terminal
router ospfv3 100
address-family ipv4 unicast
default-information originate metric 40 metric-type 2
end - C. configure terminal
router ospfv3 100
address-family ipv4 unicast
default-information originate always metric 40 metric-type 1
end - D. configure terminal
router ospfv3 100
address-family ipv4 unicast
default-information originate metric 40 metric-type 1
end
Answer: B
NEW QUESTION 159
Refer to the exhibit:
A network engineer is implementing a BGP protocol. Which effect of the locat-as keyword in this configuration is true?
- A. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 without additional configuration.
- B. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 and the VPNv4 address family
- C. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65012 without additional configuration
- D. It enables peer 192.168.1.2 to establish a BGP relationship with R1 using AS 65112 and the VPNv4 address family
Answer: A
NEW QUESTION 160
Drag and drop the functions from the left onto the Path Computation Element Protocol roles on the right.
Answer:
Explanation:
NEW QUESTION 161
Refer to the exhibit.
An engineer is trying to implement BGP configuration on a router Which configuration error prevents the ASBR from establishing a BGP neighborship to a directly connected BGP speaker?
- A. The VPNv4 address family interferes with the 8GP IPv4 address family negotiations.
- B. The routing policy is absent for this Cisco IOS XR eBGP instance.
- C. The IPv4 address family configuration under neighbor configuration-mode must be removed.
- D. The TCP session parameters are not specified.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/routers/xr12000/software/xr12k_r41/routing/configuration/guide/routing_cg41xr12k_chapter1.html
NEW QUESTION 162
How much must the MTU be increased when configuring the 802.1q VLAN tag?
- A. 8 bytes
- B. 4 bytes
- C. 2 bytes
- D. 12 bytes
Answer: B
NEW QUESTION 163
Refer to the exhibit:
Which command is used to complete this configuration for QoS class-based marking?
- A. PE-A(config-pmap-c)#fair-queue
- B. PE-A(config-pmap-c)#random-detect
- C. PE-A(config-pmap-c)#set dscp ef
- D. PE-A(config -pmap-c)#priority
Answer: C
NEW QUESTION 164
Refer to the exhibit:
When implementing an LDP protocol, an engineer experienced an issue between two directly connected routers and noticed that no LDP neighbor exists for 1.1.1.1.
Which factor should be the reason for this situation?
- A. R2 sees the wrong type of hellos from R1
- B. LDP needs to be enabled on the R2 loopback interface
- C. R2 does not see any hellos from R1
- D. LDP needs to be enabled on the R2 physical interface
Answer: D
NEW QUESTION 165
Refer to the exhibit.
An engineer implemented OSPF neighbor relationship on an IOS device. Which configuration must be applied to get the OR/BOR election removed from interfaces running OSPF?
- A. ip ospf network non-braodcast on interfaces running OSPF
- B. ip ospf network braodcast in interfaces running OSPF
- C. ip ospf network multipoint-to-point on interfaces running OSPF
- D. ip ospf network point-to-point on interfaces running OSPF
Answer: D
NEW QUESTION 166
Refer to the exhibit:
With which router does IOSXRV-1 have LDP session protection capability enabled but session hold up is not active?
- A. 192.168.0.1
- B. 192.168.0.4
- C. 192.168.0.3
- D. 192.168.0.5
Answer: D
NEW QUESTION 167
Refer to the exhibit:
This output is included at the end of an output that was provided by a device using NETCONF.
What does the code show?
- A. It shows that the full configuration is being modeled by VANG
- B. It shows NETCONF uses remote procedure calls.
- C. It shows that the running configuration is blank
- D. It shows the hostname of the device as rpc-reply
Answer: B
NEW QUESTION 168
Drag and drop the technologies from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION 169
Which configuration modifies Local Packet Transport Services hardware policies?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
NEW QUESTION 170
......
Nowadays, infrastructure, networking, and software have become more and more interrelated. Applications give new experiences, and with well-targeted networking, the service suppliers can use the automation to secure and scale their infrastructure. That is why many IT specialists pass the exams to obtain the certification(s) that will validate their skills. Thus, the CCIE Service Provider and CCNP Service Provider certificates can prove that you know about provider networking: from planning & designing to managing & optimizing. These certifications are presented by Cisco, and to earn them, the individuals have to complete the core test, which is 350-501 SPCOR. Besides that, they will be required to pass one concentration exam of their choice (there are 3 of them for CCNP Service Provider) or one practical lab test (for CCIE Service Provider).
Latest Cisco 350-501 Real Exam Dumps PDF: https://www.testkingpass.com/350-501-testking-dumps.html
350-501 Exam Dumps, 350-501 Practice Test Questions: https://drive.google.com/open?id=103aHVGearScJIh8it-2IR3KrxHtbSuIa