[Aug-2022] 350-601 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund
Pass Cisco 350-601 Exam With Practice Test Questions Dumps Bundle
NEW QUESTION 34
Drag and drop the keywords onto the URL request to collect all the subnets configured under tenant Production using a REST API. Not all options are used.
Answer:
Explanation:
NEW QUESTION 35
Refer to the exhibit.
What is a characteristic presented in the service profile of the UUID?
- A. based on the hardware
- B. unique system generated
- C. vendor assigned
- D. allocated from a UUID pool
Answer: D
NEW QUESTION 36
An engineer is implementing OTV on a transport that supports multicast. The solution needs to meet the following requirements:
* Establish adjacency to the remote peer by using multicast.
* Enable OTV advertisements for VLAN 100 to the other site.
Which two commands should be configured to meet these requirements? (Choose two.)
- A. otv control-group 232.1.1.1
- B. otv use-adjacency-server 172.27.255.94
- C. otv extend-vlan 100
- D. otv data-group 232.2.2.0/28
- E. otv site-vlan 100
Answer: A,D
Explanation:
Section: Network
Explanation/Reference:
https://www.ciscopress.com/articles/article.asp?p=2999385&seqNum=2
NEW QUESTION 37
What is an advantage of NFS as compared to Fibre Channel?
- A. NFS provides the dynamic allocation of storage capacity.
- B. NFS provides direct access to the underlying storage hardware.
- C. NFS removes the impact of IP overhead.
- D. NFS enable thin provisioning for LUNs.
Answer: A
Explanation:
Explanation
https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2018/pdf/BRKINI-1011.pdf
NEW QUESTION 38
An administrator needs to configure an automated policy to shut down a link when a given threshold is exceeded on MDS switch. Which feature needs to be used?
- A. EEM
- B. RMON
- C. Scheduler
- D. Call Home
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/ interfaces/nx-os/cli_interfaces/intf.html
NEW QUESTION 39
An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python code using XML and JSON message formats. The solution needs to be available on a Nexus 7700 series switch. Which utility should be used?
- A. Guest Shell for NX-OS
- B. NX-API Sandbox
- C. Open NX-OS
- D. NX-OS JSON-RPC
Answer: B
Explanation:
Section: Automation
Explanation/Reference:
https://developer.cisco.com/docs/nx-os/#!nx-api-cli-developer-sandbox
NEW QUESTION 40
An engineer is asked to manage a large-scale data center and collect information from multiple Cisco NX-OS devices using Cisco NX-OS Data Management Engine model.
Which technology should be used to accomplish this goal?
- A. JSON-RPC
- B. NX-API REST
- C. NETCONF
- D. NX Yang
Answer: B
NEW QUESTION 41
What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex deployment?
- A. Increased compression efficiency
- B. increased network throughput
- C. offline encryption acceleration
- D. GPU acceleration
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/ Installation_VMWare_ESXi/3_5/b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5/ b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5_chapter_01100.html#:~:text=Overview%
20of%20HyperFlex%20Hardware%20Acceleration%20Cards,-This%20chapter%20provides&text=These%
20cards%20provide%20improved%20performance%20and%20compression%20efficiency%20for%20most
%20storage%20workloads.
NEW QUESTION 42
An engineer must upgrade a Cisco Nexus 9500 Series Switch. The requirement is for all switch components to be upgraded in batches. Drag and drop the components from the left into the order in which they should be upgraded, on the right, for the upgrade process to complete successfully Not all components are used.
Answer:
Explanation:
NEW QUESTION 43
A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches.
Drag and drop the Cisco MDS 9000 Series roles from the left onto the correct categories on the right.
Answer:
Explanation:
NEW QUESTION 44
Which component is disrupted when the cisco integrated Management controller is upgraded on a cisco UCS series server?
- A. KVM sessions
- B. Data traffic
- C. Cisco UCS Manager
- D. SAN traffic
Answer: A
NEW QUESTION 45
An engineer evaluates a UI-based infrastructure management system capable of monitoring and deploying standardize VXLAN BGP EVPN deployments. The storage administrator else need the solution to manage the cisco MDS 9090 series Switches. Which solution meets these requirements?
- A. UCSD
- B. Intersight
- C. Tetration
- D. SCNM
Answer: D
NEW QUESTION 46
An engineer must perform a backup operation of the Cisco UCS system. The backup must be transferred to a secure location using UDP and must contain information about VLANs, VSANs, and other policies. Also, the operations team requires the backup file to be in a human-readable format. Which configuration set meets these requirements?
- A. Type: Full state
Protocol: SFTP - B. Type: All configuration
Protocol: FTP - C. Type: Logical configuration
Protocol: TFTP - D. Type: System configuration
Protocol: SCP
Answer: C
NEW QUESTION 47
Refer to the exhibit.
An engineer configures a new application profile using REST API and receives this error massage. Which method can be used before application profile can be configured?
- A. POST to aaaLogin
- B. POST to aaaRefresh
- C. GET to aaaListDomains
- D. POST to aaaLogout
Answer: A
NEW QUESTION 48
When the default firmware package is set to a new version, which type of policy determines the liming of server reboots during the firmware upgrade?
- A. maintenance
- B. diagnostics
- C. local disk
- D. BIOS
Answer: A
Explanation:
Section: Compute
Explanation/Reference:
NEW QUESTION 49
Refer to the exhibit.
Which two statements about the routing table of the leaf switch are true? (Choose two.)
- A. The next hop 10.0.8.65 for route 10.20.1.0./24 is the TEP address of a border leaf in ACI.
- B. 10.20.1.0./24 is a BD subnet in ACI.
- C. The next hop 10.1.168.95 for route 172.16.100.0/24 is the TEP address of a border leaf in ACI.
- D. The next hop 10.0.1.14 for route 172.16.99.0/24 is the TEP address of a border leaf in ACI.
- E. 172.16.100.0/24 is a BD subnet in ACI.
Answer: A,B
NEW QUESTION 50
Refer to the exhibit.
Which type of backup is required to restore a Cisco UCS configuration?
- A. all configuration
- B. logical configuration
- C. system configuration
- D. full state
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/1-0-2/b_CLI_Config_Guide_
NEW QUESTION 51
Refer to the exhibit.
What is the outcome of this command when the ELPD is updated on a Cisco Nexus 9000 series switch?
- A. shows a simulated upgrade of the EPLD
- B. displays the impact of the upgrade on the operation of the switch
- C. displays the compatibility of the EPLD upgrade and the image in the bootflash
- D. upgrades the EPLD on the switch disruptively
Answer: B
Explanation:
You can use the show install impact epld bootflash: command to determine whether the EPLDs can be upgraded for all the modules or for specific modules on a switch. This command indicates the current EPLD images, new EPLD images, and whether the upgrades would be disruptive to switch operations. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/epld/n9k-epld-rn-61.html
NEW QUESTION 52
A network engineer needs to upgrade the EPLDs of the fabric modules for a Cisco MDS director-class switch.
In which order are components reloaded during the process?
- A. all fabric modules followed by the entire switching platform
- B. all fabric modules in parallel
- C. one module and one supervisor at the time
- D. one fabric module at the time
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/release_notes/epld/epld_rn_8_4_1a
"To update all EPLDs sequentially with a single command, use the install all epld command with the module all fan-module all xbar all options. After each module is upgraded, it is power cycled to load the EPLD update."
NEW QUESTION 53
Refer to the exhibit.
The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC?
- A. N7K-1 preempts N7K-2 as the STP root.
- B. N7K-1 and N7K-2 appear as a single STP root.
- C. N7K-1 appears as the STP root.
- D. N7K-2 appears as the STP root.
Answer: B
NEW QUESTION 54
An engineer changed a configuration and must perform a rollback.
Which statement applies to a Cisco Nexus 5600 Series Switch?
- A. The configuration rollback functionality is disabled when FCoE is enabled.
- B. A system checkpoint is generated automatically when the running configuration is saved to NVRAM.
- C. Errors are skipped when an atomic rollback type is triggered.
- D. A user who is assigned to the network-operator user role can perform a rollback.
Answer: A
Explanation:
Section: Compute
NEW QUESTION 55
Refer to the exhibit.
An engineer must distribute all the host ports to use all eight configured FEX uplinks. The solution must minimize disruption if an uplink fails Which action accomplishes this objective?
- A. Set the pinning max-links value to 8
- B. Statically assign each host interface to a fabric uplink
- C. Change the supported FEX type
- D. Configure the eight uplinks in a port channel
Answer: D
Explanation:
Traffic disruption should be minimised when an uplink fails. If pinning was used and an uplink failed, then traffic associated with the failed link would be disrupted until it could be re-routed. Using a port-channel is much less disruptive.
NEW QUESTION 56
......
2022 Valid 350-601 test answers & Cisco Exam PDF: https://www.testkingpass.com/350-601-testking-dumps.html
Free Cisco 350-601 Exam Questions and Answer from Training Expert TestkingPass: https://drive.google.com/open?id=1z5B5IB-H1NFFKq7gT6Zd6LAdGvYZydik