5V0-21.21 PDF Dumps Real 2023 Recently Updated Questions
Released VMware 5V0-21.21 Updated Questions PDF
VMware 5V0-21.21 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 20
An administrator is setting up vSAN file services on a vSAN cluster.
Which two security policies on the distributed port groups are automatically enabled in the process? (Choose two.)
- A. Jumbo Frames
- B. Promiscuous Mode
- C. DVFiltering
- D. MacLearning
- E. Forged Transmits
Answer: B,E
NEW QUESTION 21
A 4-node vSAN cluster is configured with an erasure coding storage policy. The Ensure Accessibility maintenance mode was selected. While performing the maintenance, a second node fails.
What will be the impact on the vSAN cluster?
- A. There will be no impact on performance.
- B. The performance will be degraded.
- C. The VMs will be in a suspended state.
- D. The VMs will no longer be accessible.
Answer: A
NEW QUESTION 22
A company hosts a vSAN 7 stretched cluster for all development workloads. The original sizing of a maximum of 250 concurrent workloads in the vSAN cluster is no longer sufficient and needs to increase to at least 500 concurrent workloads within the next six months.
To meet this demand, the original 8-node (4-4-1) cluster has recently been expanded to 16 nodes (8-8-1).
Which three additional steps should the administrator take to support the current growth plans while minimizing the amount of resources required at the witness site? (Choose three.)
- A. Configure the vSAN stretched cluster to use the new vSAN witness.
- B. Deploy a new extra large vSAN witness appliance at the witness site.
- C. Deploy a new large vSAN witness appliance at the witness site.
- D. Add the new vSAN witness appliance to vCenter Server.
- E. Configure the new vSAN witness as a shared witness appliance.
- F. Upgrade the vSAN stretched cluster to vSAN 7.0 U1.
Answer: A,C,E
NEW QUESTION 23
An administrator is tasked to create a custom storage policy for workloads and is including additional disk stripes while defining the storage policy.
What is the main purpose of this practice?
- A. To set a failure tolerance
- B. To increase available storage space
- C. To improve performance
- D. To reconstruct corrupted data
Answer: A
NEW QUESTION 24
An architect collected the below technical requirements from the customer during a vSAN cluster design workshop:
* Maximize the vSAN datastore usable capacity.
* Deduplication and compression are required to help utilize available capacity efficiency.
* Ensure the highest level of resiliency wherever possible.
Which disk group configuration should the architect include in the design?
- A. One disk group per host, with one cache tier flash disk and four capacity tier flash disks.
- B. Two disk groups per host, each with one cache tier flash disk and six capacity tier flash disks.
- C. Two disk groups per host, each with one cache tier flash disk and four capacity tier flash disks.
- D. Two disk groups per host, each with one cache tier flash disk and six capacity tier magnetic disks.
Answer: D
NEW QUESTION 25
An administrator has been tasked with enabling encryption for existing virtual machines on a vSAN cluster.
Which three prerequisites must be satisfied before completing the task? (Choose three.)
- A. Establish a trusted connection with the KMS
- B. Enable Data-In-Transit encryption first
- C. Enable that the virtual machines are powered on
- D. Create an encryption storage policy
- E. Verify if a role with privilege "Cryptographic operations.Migrate" is assigned
- F. Verify if a role with privilege "Cryptographic operations.Encrypt new" is assigned
Answer: A,D,F
Explanation:
Because Before you can create encrypted virtual machines, you must create an encryption storage policy. You create the storage policy once, and assign it each time you encrypt a virtual machine or virtual disk. https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.security.doc/GUID-7DE1ED8F-880B-421E-B27B-5AAA58454AFA.html
NEW QUESTION 26
Which statement accurately describes the result when proper VM Storage Policy Affinity Rules on a stretched vSAN cluster are set?
- A. Proper policies result in higher inter-site bandwidth utilization.
- B. When a site is disconnected, the VM will continue to have access to its VMDK.
- C. When a site is disconnected, the VM will lose access to its VMDK.
- D. Bandwidth is unnecessarily sent across the inter-site link.
Answer: B
NEW QUESTION 27
An architect is designing a vSAN cluster.
Which storage controller option will yield optimal performance?
- A. Hugh queue depth
- B. RAID 0
- C. Enable battery write-back caching
- D. Set caching to 50% read on the controller
Answer: A
NEW QUESTION 28
An administrator has received an alert indicating that a single capacity device is close to failing within the production vSAN Cluster. The administrator must now complete preemptive maintenance on the vSAN Cluster without impacting the availability of workloads or vSAN File Services.
The following information is known about the vSAN Cluster:
* vSAN 7.x Cluster
* vSAN node count: 8
* De-Duplication and Compression: Enabled.
* Encryption: Disabled
* Current Utilization: 45%
* Disk Groups: 2
* Devices per node: 2 x 400 GB SSD, 6 x 1.8 TB SSD
Which three steps should the administrator take to successfully complete the task? (Choose three.)
- A. Remove the affected Disk Group from the vSAN Cluster, and choose Full Data Migration.
- B. Replace the failed disk with a storage device that is identical in class but smaller in capacity.
- C. Remove the affected Disk from the Disk Group, and choose Full Data Migration.
- D. Remove the affected Disk Group from the vSAN Cluster, and choose No Data Migration.
- E. Put the affected vSAN host into maintenance mode to physically replace the storage device.
- F. Replace the failed disk with a storage device that is identical in class and capacity.
Answer: C,E,F
Explanation:
If you upgrade the capacity device, verify the following requirements:
- Verify that the cluster contains enough space to migrate the data from the capacity device.
- Place the host in maintenance mode. See Place a Member of Virtual SAN Cluster in Maintenance Mode.
"Select the flash capacity device or magnetic disk, and click Remove selected disk(s) from disk group."
https://docs.vmware.com/en/VMware-vSphere/6.5/com.vmware.vsphere.virtualsan.doc/GUID-4E3390C1-6C50-49E5-AEB6-C9BC037979A1.html
NEW QUESTION 29
An administrator is planning to deploy workloads on a six node vSAN cluster, and all nodes are distributed equally across three racks.
Which action is required to ensure that the workload VMs remain compliant with the default vSAN policy after a complete rack failure?
- A. Add an additional host per rack, and configure vSAN with three fault domains and FTT=2.
- B. Add an additional rack with two hosts, and configure vSAN with four fault domains and FTT=1 (mirroring).
- C. Add an additional rack with two hosts, and configure vSAN with four fault domains and FTT=1 (erasure coding).
- D. Add two additional hosts per rack, and configure vSAN with three fault domains and FTT=1.
Answer: B
NEW QUESTION 30
During a vSAN design workshop, an architect collected these customer requirements:
* Leverage vSAN storage policies with Erasure Coding.
* Enable Deduplication and Compression.
* Use the minimum number of hosts in the cluster.
* Maintain full storage policy compliance when two nodes are down.
Which vSAN cluster design meets the customer's requirements?
- A. Five nodes Hybrid vSAN cluster
- B. Six nodes Hybrid vSAN cluster
- C. Five nodes All-Flash vSAN cluster
- D. Six nodes All-Flash vSAN cluster
Answer: D
NEW QUESTION 31
An administrator has received an alert indicating that a single capacity device is close to failing within the production vSAN Cluster. The administrator must now complete preemptive maintenance on the vSAN Cluster without impacting the availability of workloads or vSAN File Services.
The following information is known about the vSAN Cluster:
* vSAN 7.x Cluster
* vSAN node count: 8
* De-Duplication and Compression: Enabled.
* Encryption: Disabled
* Current Utilization: 45%
* Disk Groups: 2
* Devices per node: 2 x 400 GB SSD, 6 x 1.8 TB SSD
Which three steps should the administrator take to successfully complete the task? (Choose three.)
- A. Remove the affected Disk Group from the vSAN Cluster, and choose Full Data Migration.
- B. Replace the failed disk with a storage device that is identical in class but smaller in capacity.
- C. Remove the affected Disk from the Disk Group, and choose Full Data Migration.
- D. Remove the affected Disk Group from the vSAN Cluster, and choose No Data Migration.
- E. Put the affected vSAN host into maintenance mode to physically replace the storage device.
- F. Replace the failed disk with a storage device that is identical in class and capacity.
Answer: A,C,F
NEW QUESTION 32
An administrator has been tasked to reboot a node in an encrypted vSAN cluster. The vSAN disk groups on that node become locked after rebooting the node.
Which step should be performed to exit the locked state?
- A. Manually replace the Host Encryption Key (HEK) of each affected host.
- B. Run /etc/init.d/vsanvpd restart to rescan the VASA providers.
- C. Restore the communication with the KMS server, and re-establish the trust relationship.
- D. Replace the caching device in each affected disk group.
Answer: C
NEW QUESTION 33
Which statement accurately describes the result when proper VM Storage Policy Affinity Rules on a stretched vSAN cluster are set?
- A. When a site is disconnected, the VM will continue to have access to its VMDK.
- B. Proper policies result in higher inter-site bandwidth utilization.
- C. Bandwidth is unnecessarily sent across the inter-site link.
- D. When a site is disconnected, the VM will lose access to its VMDK.
Answer: D
NEW QUESTION 34
An administrator is planning to deploy cloud-native workloads onto the vSAN Direct datastore.
Which storage policy structure rule is supported?
- A. Host-based rules
- B. vVOL storage rules
- C. Storage performance-based rules
- D. Tag-based placement rules
Answer: A
NEW QUESTION 35
A company has engaged a consultant to upgrade an existing vSAN cluster to vSAN 7.0 U1. The company wants to ensure that the same vSAN process can be used in the future.
During the discovery phase, the consultant found the following information about the existing environment:
* The vCenter Server is currently version 7.0.
* The vSAN Cluster has the following configuration:
- vSAN version: 7.0
- Number of vSAN nodes: 6
- Encryption: enabled
- Deduplication and Compression: enabled
- Fault Domains: 1
- vSAN Capacity Utilization: 60%
* Each vSAN node has the following configuration:
- ESXi version: VMware vSphere 7.0
- CPU: 2 processors, 20 cores
- RAM: 1024GB RAM.
- Disk: 2 Cache SSDs and 6 Capacity SSDs
- Network: 4 x 10GbE
* All current hardware (which is from a single vendor) is listed on the vSAN Compatibility Guide for vSAN 7.
Which three recommendations should the consultant make to ensure that the vSAN cluster upgrade is completed? (Choose three.)
- A. Upgrade to VMware vCenter Server 7.0 U1.
- B. Upgrade all vSAN nodes to VMware vSphere 7.0 U1 using the baselines capability within VMware Update Manager (VUM).
- C. Disable vSAN Encryption before starting the upgrade process.
- D. Upgrade all vSAN nodes to VMware vSphere 7.0 U1 using the images capability within VMware Update Manager (VUM).
- E. Choose the Allow reduced redundancy option.
- F. Set VMware Distributed Resource Scheduling (DRS) to partially automated.
Answer: B
NEW QUESTION 36
......
5V0-21.21 Dumps and Practice Test (52 Exam Questions): https://www.testkingpass.com/5V0-21.21-testking-dumps.html
Guide (New 2023) Actual VMware 5V0-21.21 Exam Questions: https://drive.google.com/open?id=1IGHq4Fnm9cxmUH0InhP1VC2Y-2QGUuOv