1z0-1045-22 Dumps PDF New [2023] Ultimate Study Guide
1z0-1045-22 Exam Dumps PDF Updated Dump from TestkingPass Guaranteed Success
Oracle 1z0-1045-22 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 42
You are the Inventory Control Supervisor at your employer's East Coast facility. Your employer is a 3PL, and your customer is a large company that is also serviced out of the other 3PL facilities. As you start the shift, your Inventory Control team members inform you of a significant change in the RF Cycle Counting process.
Lost IBLPNs are now updates with a "00" lock code rather than the expected "LL" code.
Which scenario is causing this issue?
- A. An inventory team member in the other facility marked a lost case with "00" lock code causing all subsequent lost cases to be defaulted to the same code across all LPNs for all company/facility combinations.
- B. One of your inventory team members changed his/her RF parameter default lock code causing the same configuration change to propagate to all users in the facility.
- C. Your counterpart at the 3PL's other facility changed one of the cycle counting company parameters and that impacted your workflow for that same company.
- D. While counting LPNs at a location, one of your team members marked a lost case with the new lock code.
The new lock code is stored in system memory and applied to all IBLPNs counted as "Lost". - E. You dismiss the concern because a change in the lock code has no impact on either the WMS Cloud or host inventories.
Answer: D
NEW QUESTION 43
Which statement is true regarding Replenishment Rules?
- A. Replenishment Rules created at Parent company view can be edited at Child company view.
- B. Replenishment Rules are only editable at the company level in which it was created.
- C. Replenishment Rules are used for defining Wave Template.
- D. Replenishment Rules are used for Inventory movement between two warehouses.
Answer: C
NEW QUESTION 44
You are using the WMS Cloud at the Stores as well as the DC. Your workflow at that Store requires that you quickly pick orders for the customer when they arrive.
Which configuration allows you to achieve this workflow requirement?
- A. Create a Flow Through process and configure each customer's address as a "Designation Location"
- B. Create an Order Type with the flag "Allocate during Pick" enabled so that you can pick orders at the store without waving.
- C. Create a wave template with Wave Template Type "Store", then wave will allocate orders in a FiFO
- D. Change the Order Type to "Rush" and wave it because the customer is waiting.
- E. Set the Order Type to "Pick Without Wave". This allows the RF options to automatically pick up those order and display to pickers.
Answer: B
NEW QUESTION 45
Your client finds it easier to read reports without repeated values. The client shared an example report to demonstrate the way they want their columns to be displayed.
What action should you take to make your report look like the example report provided by client?
Report A:
- A. Select the Hide Repeated Values icon.
- B. Select the Hid Common Values icon.
- C. Select Chart Wizard, and delete repeated values.
- D. Select the Suppress Duplicate Values icon.
Answer: D
NEW QUESTION 46
You want to wave three orders. Two orders had the same route number in the order header, and the other order didn't have a route number. You want to make sure the orders are assigned to the same load.
What should you do or check?
- A. If they all have the same "Ship to Name" and "Ship to Address 1", they will be assigned to the same load.
- B. Change company parameter WAVE_ASSIGN_LOAD to One load per wave
- C. Add another route number to the third order. As long as they are waved together, they will be assigned to the same load.
- D. Change the Task selection criteria to be configured to assign by load.
Answer: A
NEW QUESTION 47
A Purchase order created in ERP is downloaded to WMS Cloud.
Which two statements are correct related to the Purchase order update? (Choose two.)
- A. UPDATE is sent in the Header and CREATE in the Detail for an existing Purchase Order line. The application will add up the corresponding "Order Quantity".
- B. UPDATE is sent both in the Header and Detail for an existing line. The application will just update the record at Details.
- C. The Purchase order header can be updated by sending an UPDATE action code when the status is in Created and Received.
- D. Purchase order can be re-created by sending the RE-CREATE action code when the status is In- Receiving.
- E. The RE-CREATE action code if sent for an existing PO, the same PO will be deleted and re-created with the new details.
Answer: B,C
NEW QUESTION 48
As an Inventory Super User, you are configuring LPNs per tier and Tiers per Pallet fields at Item Details screen.
Which statement is true about LPNs per tier and Tiers per Pallet?
- A. LPNs per tier and Tiers per pallet are used to define the standard number of case and pack for an Item during receiving.
- B. LPNs per tier and Tiers per Pallet are used to define number of Ob LPN per tier during shipping.
- C. LPNs per tier and Tier per Pallet are used to define the standard number of LPNs acceptable per pallet during receiving.
- D. LPNs per tier and Tiers per Pallet are used to define number of IB LPN per tier during receiving.
Answer: C
NEW QUESTION 49
Your company's count process has two levels:
First, at the end of each quarter, the operators will need to get a list of all the LPN numbers in every location via cycle count.
Second, at the end of each month, the operators will do a spot check for any 100 LPNs and count their content information, and to save time, they will scan each item only once and enter the total quantity of the item marked on the inner package inside an LPN.
Your company has reserve locations only for storage and you're doing the WMS Cloud configuration for the operators. Which two tasks should you complete? (Choose two.)
- A. Create a Cycle count for LPN deferred/immediate updates RF screen for the operators to use, and set the sku-scan-mode RF parameter to By Qty Scan.
- B. Create a Cycle Cnt RF screen for the operators to use, and set the content-count RF parameter to By Sku Qty.
- C. Create a Cycle Cnt RF screen for the operators to use, and leave the content-count RF parameter blank.
- D. Create a Resv Nbr Cnt RF screen for the operators to use.
- E. Enable the Recount Location Detail cc_trigger.
Answer: A,D
NEW QUESTION 50
Select two configurations required to fulfill a Cross Dock order. (Choose two.)
- A. Wave template should be configured to allocate Cross Dock Order
- B. The Cross Dock Outbound Order type should be defined
- C. IB Shipment Type should be defined for Cross Dock ASN
- D. Module Parameter should be enabled on the RF Receive Screen for receiving Cross Dock ASN
- E. The Replenishment template is required to replenish Cross Dock Order
Answer: B,D
NEW QUESTION 51
You are monitoring the progress of the picking wave and notice that a rush order needs to be picked immediately.
Which two steps should you take to complete the Picking Tasks as soon as possible? (Choose two.)
- A. Select the tasks in the Tasks UI, and confirm the pick in the UI.
- B. Select the tasks and in the Tasks UI, select Change Task Priority to give the task a higher priority.
- C. Select the tasks in the Tasks UI, select Cancel Task, and re-run the wave.
- D. Select the tasks in the Tasks UI, select Assign user, and let the picker know that he/she is to select the
- E. Manually take the inventory from the location to the shipping area.
Answer: A,D
Explanation:
tasks for immediate pick.
NEW QUESTION 52
Select the two data formats supported by Oracle WMS Cloud with its built-in interfaces and APIs. (Choose two.)
- A. EDI
- B. Delimited Flat File
- C. XML
- D. JSON
- E. pdf
Answer: B,C
NEW QUESTION 53
You are the Inventory Control Supervisor at your employer's East Coast facility. Your employer is a 3PL, and your customer is a large company that is also serviced out of the other 3PL facilities. As you start the shift, your Inventory Control team members inform you of a significant change in the RF Cycle Counting process.
Lost IBLPNs are now updates with a "00" lock code rather than the expected "LL" code.
Which scenario is causing this issue?
- A. While counting LPNs at a location, one of your team members marked a lost case with the new lock code.
The new lock code is stored in system memory and applied to all IBLPNs counted as "Lost". - B. An inventory team member in the other facility marked a lost case with "00" lock code causing all subsequent lost cases to be defaulted to the same code across all LPNs for all company/facility combinations.
- C. Your counterpart at the 3PL's other facility changed one of the cycle counting company parameters and that impacted your workflow for that same company.
- D. One of your inventory team members changed his/her RF parameter default lock code causing the same configuration change to propagate to all users in the facility.
- E. You dismiss the concern because a change in the lock code has no impact on either the WMS Cloud or host inventories.
Answer: D
NEW QUESTION 54
You are configuring the WMS Cloud to have multiple facilities and, as an added measure of control, you want to easily identity the facility by looking at the barcode printed on the outbound carton.
Identify two valid configurations that are available in the Sequence Counter UI that you can use for the OBLPN. (Choose two.)
- A. You can specify the "Color Code" in the Sequence Counter.
- B. You can set up the sequence counter OBLPN to "Append Facility Code to Prefix".
- C. You can configure the sequence length for this facility to be different from the other facilities.
- D. You can specify different counts for the different facilitates within the Sequence Counter.
- E. You can set up the count increment in Facility 1 to increase by 1, the count increment in Facility 2 to increment by 2, and so on.
Answer: B,D
NEW QUESTION 55
What is the primary purpose of the Wave Template Search Screen?
- A. to identify all outbound loads that have not completed picking yet
- B. to determine which available orders will be waved for picking
- C. to determine how many picking tasks will be waved for picking
- D. to determine the locked locations for inventory allocation
- E. to determine from which part of the warehouse the inventory will be allocated
Answer: C
NEW QUESTION 56
What happens behind the flag Only deallocate on Short in the order type screen?
- A. When the parameter is set to Yes, the short pick will cancel the shorted order line automatically and
- B. When the parameter is set to No, the shorted quantity on the order remains in the "allocated" status.
- C. The Order Type has no impact on the Picking Process.
- D. When the parameter is set to Yes, then only the shorted quantity will get deallocated form the order.
- E. When the parameter is set to YES, during short pick, the system will put the order hold status until more inventory is available.
Answer: D
Explanation:
inventory adjustment will be generated for the item.
Explanation:
Only Deallocate on Short
If allocated inventory is not physically available to completely fulfill an order, the missing inventory quantity will be short picked. The order is fulfilled with only the available inventory quantity. If an order is short picked:
When this flag = YES, the shorted quantity is only deallocated from the order.
When this flag = NO, the shorted quantity is cancelled from the order.
NEW QUESTION 57
Your customer is a Third Party Logistics operator (3PL) and ships multiple customer's orders from two centralized facilities, one on each coast of the country.
How do you set up the Facility, Company, and User hierarchy in the system (in sequential order)?
- A. Create the Parent Company as the 3PL, then the two facilities, next the Users in the facilities, and the Companies that represent the customers, and the users to the companies.
- B. Because of the distance between Facilities, you recommend two WMS Cloud instances for your customer.
- C. Create the 3PL's customer's Companies first, then the Users, next assign customers and Users to the Facilities, and finally create an Admin account for the 3PL in each facility.
- D. Create the Parent 3PL Company, then nested Locations Zones to represent the facilities and the customer Companies and finally add the Users.
- E. Create the Parent 3PL Company, then the Facilities, next the Companies, next re-create each User in each facility he or she is eligible for work.
Answer: A
NEW QUESTION 58
Your company wants to use Replenishment Wave to maintain adequate inventory levels to meet customer demand by fulfilling customer's orders on time.
Which Replenishment Trigger Mode needs to be set up in the Replenishment Template for the following condition?
For active Location P20A100
Minimum Volume = 20
Max Volume = 100
Percentage of Max = 20%
Length = 20, Width = 40, Height = 60
If location P20A100 total volume goes below 20, the location is triggered for replenishment
- A. Order Based
- B. Percentage of Max
- C. Minimum Capacity
- D. Reactive
Answer: B
NEW QUESTION 59
Your customer wants to Putaway LPN to Location by using the Putaway Rules and link the location with the Replenishment Zone.
Which four configurations are required? (Choose four.)
- A. Set Criteria for Putaway Rules.
- B. Set Replenishment Zone for Reserve Location.
- C. Putaway Priority and Rules are set at Facility Level.
- D. Set Replenishment Zone for Active Location.
- E. Set the Location Size Type at Facility Level.
- F. Putaway Type is set at Facility Level.
Answer: C,D,E,F
NEW QUESTION 60
Why is it necessary to have a consolidation location?
- A. Packing using a Distribution transaction requires a consolidation location for each store.
- B. Consolidation locations are used to consolidate orders for a wave.
- C. It is necessary if you want to consolidate while packing.
- D. After you are finished picking your pick cart, you use a consolidation location to pack.
Answer: D
NEW QUESTION 61
Select three statements are true. (Choose three.)
- A. Appointments cannot be used to track lead-time from the trailer's check-in time to the receipt of the first LPN into the system.
- B. Appointments can be used (instead of IB loads) as a way of checking in Loads into the WMS Cloud for receiving.
- C. The Duration as specified cannot be exceeded by the users.
- D. The matching value type and matching value must be specified when the appointment is created.
- E. Appointments are useful for tracking time discrepancies in various metrics such as planned and actual arrival time.
Answer: B,D,E
Explanation:
Reference:
context=0:44112:44122#h2_004
NEW QUESTION 62
A warehouse manager needs to view additional information not available in the existing Picking applications.
Identify two ways to fulfill this requirement. (Choose two.)
- A. Access data through SQL.
- B. Modify the base application to display additional information.
- C. Use a base WMS BI Cloud showing the needed information.
- D. Create a custom WMS BI Cloud showing the information.
Answer: B,D
NEW QUESTION 63
Identify three valid statements related to IB Sorting. (Choose three.)
- A. IB Sorting is done based on Putaway Priority.
- B. IB Sorting will group SKUs with different Putaway type and build in a single pallet
- C. IB Sorting can be done by Manual and System driven method
- D. IB Sorting is done before Putaway
- E. IB Sorting is done after Putaway
Answer: A,B,C
NEW QUESTION 64
What configuration is needed to create Advance Shipment Notifications for a Transfer Order shipped between two facilities configured in the same WMS Cloud environment?
- A. Set CREATE_ASN_FOR_EACH_PO to YES at the Company level.
- B. The Facility parameter key AUTOLOAD_and_SHIP should be set to Yes.
- C. Set CREATE_ASN_FOR_EACH_PO to YES at Source and Destination Facility levels.
- D. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Destination Facility.
- E. The "ACCEPT TRANSFER SHIPMENT" flag should be enabled on the Facilities UI screen for the Source Facility.
Answer: D
NEW QUESTION 65
What is true about emailing a scheduled report?
- A. You cannot customize the subject of the email
- B. You can email reports in HTML format
- C. You can add an additional filter for a specific scheduled report
- D. The person receiving the email must have an email registered with a username in the system
Answer: C
NEW QUESTION 66
......
Pass Your Oracle Exam with 1z0-1045-22 Exam Dumps: https://www.testkingpass.com/1z0-1045-22-testking-dumps.html
1z0-1045-22 Exam Dumps - Oracle Practice Test Questions: https://drive.google.com/open?id=1oKTvx-z63CNJMULxFFv4sTbAQ07cKr_E